Hi Erik, On Sun, Dec 31, 2017 at 9:29 AM, Erik Stromdahl <erik.stromd...@gmail.com> wrote: > Uplink test results (WUSB6100M -> other computer): > > # iperf-client.sh 192.168.1.244 > /usr/bin/iperf > ------------------------------------------------------------ > Client connecting to 192.168.1.244, TCP port 1234 > TCP window size: 85.0 KByte (default) > ------------------------------------------------------------ > [ 3] local 192.168.1.190 port 50524 connected with 192.168.1.244 port > 1234 > [ ID] Interval Transfer Bandwidth > [ 3] 0.0-10.1 sec 10.8 MBytes 8.95 Mbits/sec > > The result is not so good (I expect more from an 11ac device), > but hopefully it is configuration related. >
Indeed. As a point of reference, an AR6004 device I have on my desk (which is a/b/g/n, no ac), built into a custom SBC, I can normally get iperf runs of >35 Mbits/sec. So, in short, that run is showing there's an issue. I don't have your device so I can't really help out much more than that, but in the next week or so I'll try to look at the patches and see if something pops to my eye. - Steve
