Bas Vermeulen <[email protected]> writes: > On 26-02-18 10:54, Kalle Valo wrote: >> Bas Vermeulen <[email protected]> writes: >> >>> A random (little endian eeprom'd) ar9278 card didn't work on my >>> PowerMac G5 without allowing the driver to byte-swap the eeprom. >>> >>> Introduce a module parameter endian_check to allow this to happen, >>> and the PCIe card to function correctly on BE powerpc. >>> >>> Signed-off-by: Bas Vermeulen <[email protected]> >>> --- >>> drivers/net/wireless/ath/ath9k/init.c | 6 +++++- >>> 1 file changed, 5 insertions(+), 1 deletion(-) >>> >>> diff --git a/drivers/net/wireless/ath/ath9k/init.c >>> b/drivers/net/wireless/ath/ath9k/init.c >>> index fa58a32227f5..421039dc060a 100644 >>> --- a/drivers/net/wireless/ath/ath9k/init.c >>> +++ b/drivers/net/wireless/ath/ath9k/init.c >>> @@ -67,6 +67,9 @@ static int ath9k_ps_enable; >>> module_param_named(ps_enable, ath9k_ps_enable, int, 0444); >>> MODULE_PARM_DESC(ps_enable, "Enable WLAN PowerSave"); >>> +static int ath9k_endian_check; >>> +module_param_named(endian_check, ath9k_endian_check, int, 0444); >>> +MODULE_PARM_DESC(endian_check, "Check EEPROM for endianness >>> compatibility"); >>> #ifdef CONFIG_ATH9K_CHANNEL_CONTEXT >>> int ath9k_use_chanctx; >>> @@ -587,7 +590,8 @@ static int ath9k_of_init(struct ath_softc *sc) >>> ether_addr_copy(common->macaddr, mac); >>> ah->ah_flags &= ~AH_USE_EEPROM; >>> - ah->ah_flags |= AH_NO_EEP_SWAP; >>> + if (!ath9k_endian_check) >>> + ah->ah_flags |= AH_NO_EEP_SWAP; >> A bit annoying to have a module parameter, isn't there any automatic way >> to detect/try this? But on the other hand I guess this isn't a common >> problem as nobody has reported this before? > > There is an automatic way to detect this, but that is disabled by the > AH_NO_EEP_SWAP flag.
Ah, I didn't check the code at all. > The platform initialisation does not set this flag if the endian_check > member of pdata is set to true, but there is no way to not set this > when using a device tree. I used a module parameter instead of a > device tree variable because I don't know of a way to modify the > device tree my PowerMac boots with. Ok, makes sense. A module parameter is not an ideal solution I guess it's ok in this case. -- Kalle Valo
