The regdomain code is used to select the correct the correct conformance test limits (CTL) for a country. If the regdomain code isn't available and it is still programmed in the EEPROM then it will cause an error and stop the initialization with:
Invalid EEPROM contents The current CTL mappings for this regdomain code are: * 2.4GHz: ETSI * 5GHz: ETSI Signed-off-by: Sven Eckelmann <sven.eckelm...@openmesh.com> --- drivers/net/wireless/ath/regd_common.h | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/net/wireless/ath/regd_common.h b/drivers/net/wireless/ath/regd_common.h index 44e3831c13b1..14332b84443b 100644 --- a/drivers/net/wireless/ath/regd_common.h +++ b/drivers/net/wireless/ath/regd_common.h @@ -68,6 +68,7 @@ enum EnumRd { APL1_ETSIC = 0x55, APL2_ETSIC = 0x56, APL5_WORLD = 0x58, + APL13_WORLD = 0x5A, APL6_WORLD = 0x5B, APL7_FCCA = 0x5C, APL8_WORLD = 0x5D, @@ -195,6 +196,7 @@ static struct reg_dmn_pair_mapping regDomainPairs[] = { {APL3_WORLD, CTL_FCC, CTL_ETSI}, {APL4_WORLD, CTL_FCC, CTL_ETSI}, {APL5_WORLD, CTL_FCC, CTL_ETSI}, + {APL13_WORLD, CTL_ETSI, CTL_ETSI}, {APL6_WORLD, CTL_ETSI, CTL_ETSI}, {APL8_WORLD, CTL_ETSI, CTL_ETSI}, {APL9_WORLD, CTL_ETSI, CTL_ETSI}, -- 2.11.0