Hi,
On 12-03-18 09:55, Arend van Spriel wrote:
On 3/11/2018 10:47 PM, Hans de Goede wrote:
Various models Asus laptops with a SDIO attached brcmfmac wifi chip, store
the nvram contents in a special EFI variable. This commit adds support for
getting nvram directly from this EFI variable, without the user needing to
manually copy it.
This makes Wifi / Bluetooth work out of the box on these devices instead of
requiring manual setup.
Note that at least on the Asus T200TA the nvram from the EFI variable
wrongly contains "ccode=ALL" which the firmware does not understand, the
code to fetch the nvram from the EFI variable will fix this up to:
"ccode=XV" which is the correct way to specify the worldwide broadcast
regime.
This has been tested on the following models: Asus T100CHI, Asus T100HA,
Asus T100TA and Asus T200TA
Hi Hans,
I like to have this as well, but .... (see below)
Tested-by: Hans de Goede <hdego...@redhat.com>
Duh. I would expect anyone to have tested their patches although you can not
cover every system out there obviously :-p
Heh, I added it in this case as I went to the trouble of finding 4 devices
which use this and test it on all 4 devices.
Signed-off-by: Hans de Goede <hdego...@redhat.com>
---
.../broadcom/brcm80211/brcmfmac/firmware.c | 68 +++++++++++++++++++++-
1 file changed, 67 insertions(+), 1 deletion(-)
diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/firmware.c
b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/firmware.c
index 091b52979e03..cbac407ae132 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/firmware.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/firmware.c
@@ -14,6 +14,8 @@
* CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
*/
+#include <linux/dmi.h>
+#include <linux/efi.h>
#include <linux/kernel.h>
#include <linux/slab.h>
#include <linux/device.h>
@@ -446,6 +448,67 @@ struct brcmf_fw {
void *nvram_image, u32 nvram_len);
};
+#ifdef CONFIG_EFI
+static u8 *brcmf_fw_nvram_from_efi(size_t *data_len_ret)
+{
+ const u16 name[] = { 'n', 'v', 'r', 'a', 'm', 0 };
Isn't there some helper function to make this conversion to u16 array? Hmm,
maybe it is my itch to scratch later :-)
Nope, I copied this style from existing code under drivers/firmware/efi
+ struct efivar_entry *nvram_efivar;
+ unsigned long data_len = 0;
+ u8 *data = NULL;
+ char *ccode;
+ int err;
+
+ /* So far only Asus devices store the nvram in an EFI var */
+ if (!dmi_name_in_vendors("ASUSTeK COMPUTER INC."))
+ return NULL;
Actually had a Sony device with nvram in EFI. Why not just drop this
optimization.
Ok, do you know if that variable had the same name and guid though ? Because
if it doesn't then this code is not going to work for the Sony case.
Anyways the overhead is small and this only runs once, so I will drop the
check for v2.
+ nvram_efivar = kzalloc(sizeof(*nvram_efivar), GFP_KERNEL);
+ if (!nvram_efivar)
+ return NULL;
+
+ memcpy(&nvram_efivar->var.VariableName, name, sizeof(name));
+ nvram_efivar->var.VendorGuid = EFI_GUID(0x74b00bd9, 0x805a, 0x4d61,
+ 0xb5, 0x1f, 0x43, 0x26,
+ 0x81, 0x23, 0xd1, 0x13);
+
+ err = efivar_entry_size(nvram_efivar, &data_len);
+ if (err)
+ goto fail;
+
+ data = kmalloc(data_len, GFP_KERNEL);
+ if (!data)
+ goto fail;
+
+ err = efivar_entry_get(nvram_efivar, NULL, &data_len, data);
+ if (err)
+ goto fail;
+
+ /* In some cases the EFI-var stored nvram contains "ccode=ALL" but
+ * the firmware does not understand "ALL" change this to "XV" which
+ * is the correct way to specify the "worldwide" compatible settings.
+ */
This is actually quite bad. The ALL ccode should never end up on the market as
it is intended for internal use only during bringup project phase so these
seems to be programmed wrong.
I see lots of cheap Windows 10 and ARM devices with brcmfmac sdio wifi
which ship with on disk nvram files using the "ALL" ccode. I actually have
pinned my home wifi at channel 13 to catch this, because channel 13 does
not work with the ALL ccode. If I understand correctly the worldwide
domain starts with channel 13/14 in passive/listen only mode and allows
using them once it has seen valid wifi traffic on them, so they do allow
communicating with an AP on channel 13 here in the Netherlands where that
is allowed?
Also simply selecting XV instead is not correct. There is not just one
worldwide domain in the regulatory database of the firmware image.
Right, I've read elsewhere that "X2" is the right magic value to use and
I've tested that on some other devices and that does seem to work.
I've also seen "XY" but the other Asus devices all use "XV" and that
works (makes channel 13 work) so it seemed like a good value.
Can you help me understand this problem a bit better? Is the problem with
"XV" that it may not work with all firmware versions, so on some firmware
versions it will be as bad as using ALL which the firmware also does not
understand? Or do all firmwares understand XV / XY / X2 but are there
subtle differences?
So how do you suggest we deal with this?
One solution I see is:
1) check for ccode=ALL
2) if found use DMI strings to match the specific model and set a different
ccode based on the model (so for now use XV for the T200TA only)
3) if found and the model is not known, warn about this and do nothing
Would that work for you ?
+ ccode = strnstr((char *)data, "ccode=ALL", data_len);
+ if (ccode) {
+ ccode[6] = 'X';
+ ccode[7] = 'V';
+ ccode[8] = '\n';
+ }
+
+ brcmf_info("Using nvram EFI variable\n");
+
+ kfree(nvram_efivar);
+ *data_len_ret = data_len;
+ return data;
+
+fail:
+ kfree(data);
+ kfree(nvram_efivar);
+ return NULL;
+}
+#else
+static u8 *brcmf_fw_nvram_from_efi(size_t *data_len) { return NULL; }
+#endif
+
static void brcmf_fw_request_nvram_done(const struct firmware *fw, void *ctx)
{
struct brcmf_fw *fwctx = ctx;
@@ -462,6 +525,8 @@ static void brcmf_fw_request_nvram_done(const struct
firmware *fw, void *ctx)
raw_nvram = false;
} else {
data = bcm47xx_nvram_get_contents(&data_len);
+ if (!data)
+ data = brcmf_fw_nvram_from_efi(&data_len);
if (!data && !(fwctx->flags & BRCMF_FW_REQ_NV_OPTIONAL))
goto fail;
raw_nvram = true;
@@ -472,7 +537,8 @@ static void brcmf_fw_request_nvram_done(const struct
firmware *fw, void *ctx)
fwctx->domain_nr, fwctx->bus_nr);
if (raw_nvram)
- bcm47xx_nvram_release_contents(data);
+ kvfree(data); /* vfree for bcm47xx case / kfree for efi case */
While this clearly works I can not say I like this. If you want to do it this
way, please submit a patch to remove bcm47xx_nvram_release_contents() as it is
no longer needed since we now have kvfree(). From maintainance perspective also
drop the postfix comment. We just might end up doing vmalloc in efi case at
some point and this would likely be forgotten.
It might be better if I replace the raw_nvram variable which is poorly named
with
a "bool free_bcm47xx_nvram = false;" and add a "bool kfree_nvram = false;"
Would that work for you ?
Regards,
Hans