Hi Larry
On 07/05/18 16:44, Larry Finger wrote:
Matt,
Although commit 882164a4a928 ("ssb: Prevent build of PCI host features
in module") appeared to be harmless, it leads to complete failure of
drivers b43. and b43legacy, and likely affects b44 as well. The problem
is that CONFIG_SSB_PCIHOST is undefined, which prevents the compilation
of the code that controls the PCI cores of the device. See
https://bugzilla.redhat.com/show_bug.cgi?id=1572349 for details.
Sorry for the breakage :-/
As the underlying errors ("pcibios_enable_device" undefined, and
"register_pci_controller" undefined) do not appear on the architectures
that I have tested (x86_64, x86, and ppc), I suspect something in the
arch-specific code for your setup (MIPS?). As I have no idea on how to
fix that problem, would the following patch work for you?
diff --git a/drivers/ssb/Kconfig b/drivers/ssb/Kconfig
index 9371651d8017..3743533c8057 100644
--- a/drivers/ssb/Kconfig
+++ b/drivers/ssb/Kconfig
@@ -117,7 +117,7 @@ config SSB_SERIAL
config SSB_DRIVER_PCICORE_POSSIBLE
bool
- depends on SSB_PCIHOST && SSB = y
+ depends on SSB_PCIHOST && (SSB = y || !MIPS)
default y
config SSB_DRIVER_PCICORE
I believe that the problem stems from these drivers being used for some
wireless AP functionality built into some MIPS based SoCs. The Kconfig
rules sort out building this additional functionality when configured
for MIPS (in a round about sort of way), but it allowed it even when SSB
is a module, leading to build failures. My patch was intended to prevent
that.
There was a similar issue in the same Kconfig file, introduced by
c5611df96804 and fixed by a9e6d44ddecc. It was fixed the same way as you
suggest. I've tested the above patch and it does work for MIPS
(preventing the PCICORE being built into the module).
Tested-by: Matt Redfearn <matt.redfe...@mips.com>
Thanks & sorry again for the breakage,
Matt
Thanks,
Larry