> > * Tony Lindgren <t...@atomide.com> [180605 04:22]: > > * Reizer, Eyal <ey...@ti.com> [180603 06:07]: > > > I have noticed the following recovery a couple of times on my setup > when the board was > > > just sitting for a long time with just pings > > > It starts with a firmware recovery started from the interrupt handler but > the recovery fails > > > > Sounds like the recovery needs some more work :) > > > > > leaving the sdio stuck. > > > At this stage the only way to get out of it is unload/load of the driver > modules. > > > Have you seen this on your side as well? > > > > Hmm I don't think I've seen this one yet. > > > > > 64 bytes from 192.168.100.1: seq=32772 ttl=64 time=9.644 ms > > > 64 bytes from 192.168.100.1: seq=32773 ttl=64 time=9.572 ms > > > 64 bytes from 192.168.100.1: seq=32774 ttl=64 time=10.974 ms > > > 64 bytes from 192.168.100.1: seq=32775 ttl=64 time=9.618 ms > > > [127899.040526] wlcore: ERROR SW watchdog interrupt received! starting > recovery. > > > > Do you know what does the SW watchdog means here? Does it mean the > > interrupt did not get delivered to wlcore? Or a spurious IRQ to wlcore? > > Or a timeout waiting for the ELP wake interrupt? > > Also, can you check if patch "[RFT 7/6] wlcore: Make sure firmware is > initialized > in wl1271_op_add_interface()" already fixes this issue if you did not have it > already applied? > Sure will do. The firmware that showed this issue has some extra debugging info Enabled in it and this may have been the cause of the recovery (Infernal logging error). The fact that it didn't recover was the issue itself. I am now running with the latest's firmware 8.9.0.0.78 and will see if I can still replicate it. If I see it, I will try applying patch 7 and see if it helps. Right now I don't yet have It applied.
Best Regard, Eyal
