Hi Denis, Hope you don't mind me adding the list to the explanations, so they're recorded. Your questions are completely reasonable, after all :-)
> So I've been poking around a bit more in nl80211/mac80211 stuff and I > was curious how exactly NEW_KEY/SET_KEY are supposed to be used. The > documentation is lets say... less than stellar. Yeah. This stuff grew out of WEXT mostly, and what things wpa_s did at the time... > So here's a excerpts from a capture of wpa_supplicant 2.6 connecting to > a PSK (CCMP + MFP-enabled) BSS. So first thing it does is creates the > pairwise key via CMD_NEW_KEY: > > < Request: New Key (0x0b) len 68 [ack] > Interface Index: 3 (0x00000003) > Key Data: len 16 > [...] > Key Cipher: CCMP (00:0f:ac) suite 04 > Key Sequence: len 6 > 00 00 00 00 00 00 > MAC Address [...] > Key Index: 0 (0x00) > > Response: New Key (0x0b) len 4 [0x100] > Status: Success (0) > > So far so good. Yeah, that seems reasonable :-) > The next thing it does is: > < Request: Set Key (0x0a) len 28 [ack] > Interface Index: 3 (0x00000003) > Key Index: 0 (0x00) > Key Default: true > Key Default Types: len 4 > Unicast: true > > Response: Set Key (0x0a) len 4 [0x100] > Status: Success (0) > > This part is a bit bizarre. Yeah. Maybe Jouni can chime in why this happens. I suspect the reason is some legacy with wext or ancient drivers. > First it seems to be a complete no-op on > mac80211 because mac80211 puts the key into sta->ptk, while > ieee80211_set_default_key is fully ignorant of the sta and only operates > on struct ieee80211_sub_if_data. Indeed. PTKs are also immediately selected for TX. > Is this really intended to be used > this way? Is SET_KEY useful / necessary in an STA context? What is the > intended usage here? Even if we implement, in the future, PTK rekeying properly with non-zero key index, I think we could still set the key for TX immediately, and keep the other for RX, so it shouldn't be necessary in any way for a PTK (or actually for a per-station key, which differs slightly) context. (The difference between them is that in IBSS you will have per-station GTKs, but that's also irrelevant because those are only used for RX - your own GTK on the netdev/wdev/sdata/vif level is used for TX.) > Okay, then wpa_s sets the Group key: > < Request: New Key (0x0b) len 64 [ack] > Interface Index: 3 (0x00000003) > Key Data: len 16 > [...] > Key Cipher: CCMP (00:0f:ac) suite 04 > Key Sequence: len 6 > c8 08 00 00 00 00 > Key Default Types: len 4 > Multicast: true > Key Index: 1 (0x01) > > Response: New Key (0x0b) len 4 [0x100] > Status: Success (0) > > wpa_s doesn't use CMD_SET_KEY at all for the key created above. Notice > the completely superfluous 'Key Default Types' attribute. This will be > ignored by nl80211 when invoking the add_key driver method. CMD_SET_KEY is only used in contexts where you might transmit with the key, this isn't true for the GTK in client-mode. The key types is an artifact of the IBSS I described I think, in this case you don't have a station MAC address for the key, but for GTK in IBSS you will have a MAC address (because the GTK for RX is per station) but you still need to tag it as being a GTK and not PTK. > Finally, the IGTK: > < Request: New Key (0x0b) len 64 [ack] > Interface Index: 3 (0x00000003) > Key Data: len 16 > 06 2f e6 cf cf 3d ac 01 a4 4d 32 53 ef 45 2d df > Key Cipher: BIP (00:0f:ac) suite 06 > Key Sequence: len 6 > 2e ae 8c 67 0d 33 > Key Default Types: len 4 > Multicast: true > Key Index: 4 (0x04) > > Again, no SET_KEY and the superfluous 'Key Default Types'. Same considerations as for the GTK. > So I wonder what is the purpose of NL80211_ATTR_KEY_DEFAULT_MGMT? And > how is it supposed to be used? This should be used only in AP mode though I think mac80211 doesn't because it just assumes once you get a new key you want to use it, but in theory you could switch back to an old key with it I think? At least from an API POV, perhaps not from an implementation POV. > It seems this was intended for SET_KEY to > be used with that attribute to enable protected management frame > transmission (see commit 3cfcf6ac6d69d). And default_mgmt_key is still > being referenced in ieee80211_tx_h_select_key(). However, at least > according to this behavior it is never set. Not in client mode. But in client mode you don't TX with the management key at all - you only RX with the multicast keys (GTK/IGTK). > The same question is also relevant for default_multicast_key... In AP/IBSS (and mesh?) modes this becomes relevant though, and then these do get set. nl80211_set_key() will call through if the key is default or default mgmt, and that will - in mac80211 - set these pointers to use for TX. Hope that helps a bit! johannes