On 10/10/2018 12:13 PM, Dave Taht wrote:
On Wed, Oct 10, 2018 at 10:10 AM Ben Greear <gree...@candelatech.com> wrote:
On 10/03/2018 01:29 PM, Dave Taht wrote:
On Wed, Oct 3, 2018 at 1:16 PM Toke Høiland-Jørgensen <t...@toke.dk> wrote:
Ben Greear <gree...@candelatech.com> writes:
Hello,
I often find myself wanting to figure out what equipment is to blame (and why)
in a wifi environment.
I am thinking writing a tool that would parse a pcap file and look at frames
in enough detail to flag block-ack bugs, rate-ctrl bugs, guess at the sniffer's
capture ability, etc.
Does anyone have anything already written that they would like to share, or know
of projects that might already do some of this?
Not sure if this fits your criteria, but Sven's tool to create airtime
charts from packet sniffing data immediately came to mind:
https://github.com/cloudtrax/airtime-pie-chart
I have used that. Oy, it's a PITA. Some of kathie's code over here
(example: https://github.com/pollere/pping ) uses the slightly less
painful http://libtins.github.io/ library for parsing packets.
I couldn't find anything that did what I wanted, so I wrote my own.
The (perl) code is in the wifi-diag directory of this public repo:
https://github.com/greearb/lanforge-scripts
The rest of the scripts in that repo are not related to the wifi-diag script,
so just ignore those.
Here is example output for what I have so far:
https://www.candelatech.com/oss/wifi-diag/netgear-up-5s/index.html
I *miss* writing in perl. :)
My guess from looking at that output that that was a udp flood test.
Do I win the internets?
Yes, UDP upload test with 20 emulated stations, sending ~500 byte UDP frames.
One thing we notice in the case we are debugging, is
that the average time from transmitter station device receiving BA from the AP
to the transmitter station device putting the next AMPDU frame on air
is 0.728ms for the problem AP, and 0.448ms for the good AP.
I checked that the wmm config in the beacons for the two APs is the same.
I am at a loss as to what could cause this delay, other than possibly the
problem
AP has a funky transmitter than puts a bit of extra noise on the air after it
is done transmitting a frame?
The problem AP also has 5% retransmits vs about 2% for the good AP, and problem
AP
is typically using MCS8 instead of MCS9, but even so, I do not see how that
would explain
the extra BA to AMPDU delay.
Thanks,
Ben
--
Ben Greear <gree...@candelatech.com>
Candela Technologies Inc http://www.candelatech.com