Driver works better for MT7630 without MCU calibration, which looks like it can hangs the firmware. Vendor driver do not perform it for MT7630 as well.
Signed-off-by: Stanislaw Gruszka <sgrus...@redhat.com> --- This is on top of: https://marc.info/?l=linux-wireless&m=153960591116586&w=2 drivers/net/wireless/mediatek/mt76/mt76x0/mt76x0.h | 5 +++++ drivers/net/wireless/mediatek/mt76/mt76x0/phy.c | 3 +++ 2 files changed, 8 insertions(+) diff --git a/drivers/net/wireless/mediatek/mt76/mt76x0/mt76x0.h b/drivers/net/wireless/mediatek/mt76/mt76x0/mt76x0.h index 17ad3fa0858b..33475788bc26 100644 --- a/drivers/net/wireless/mediatek/mt76/mt76x0/mt76x0.h +++ b/drivers/net/wireless/mediatek/mt76/mt76x0/mt76x0.h @@ -37,6 +37,11 @@ static inline bool is_mt7610e(struct mt76x02_dev *dev) return false; } +static inline bool is_mt7630(struct mt76x02_dev *dev) +{ + return mt76_chip(&dev->mt76) == 0x7630; +} + /* Init */ struct mt76x02_dev * mt76x0_alloc_device(struct device *pdev, diff --git a/drivers/net/wireless/mediatek/mt76/mt76x0/phy.c b/drivers/net/wireless/mediatek/mt76/mt76x0/phy.c index dbb92586b6e1..37e1ead1dc85 100644 --- a/drivers/net/wireless/mediatek/mt76/mt76x0/phy.c +++ b/drivers/net/wireless/mediatek/mt76/mt76x0/phy.c @@ -500,6 +500,9 @@ void mt76x0_phy_calibrate(struct mt76x02_dev *dev, bool power_on) struct ieee80211_channel *chan = dev->mt76.chandef.chan; u32 val, tx_alc, reg_val; + if (is_mt7630(dev)) + return; + if (power_on) { mt76x02_mcu_calibrate(dev, MCU_CAL_R, 0, false); mt76x02_mcu_calibrate(dev, MCU_CAL_VCO, chan->hw_value, -- 1.9.3
