<[email protected]> writes:
> From: Yan-Hsuan Chuang <[email protected]>
>
> main files for Realtek 802.11ac wireless network chips
>
> Reviewed-by: Stanislaw Gruszka <[email protected]>
> Signed-off-by: Yan-Hsuan Chuang <[email protected]>
[...]
> +static int rtw_ops_add_interface(struct ieee80211_hw *hw,
> + struct ieee80211_vif *vif)
> +{
> + struct rtw_dev *rtwdev = hw->priv;
> + struct rtw_vif *rtwvif = (struct rtw_vif *)vif->drv_priv;
> + enum rtw_net_type net_type;
> + u32 config = 0;
> + u8 port = 0;
> +
> + rtwvif->port = port;
> + rtwvif->vif = vif;
> + rtwvif->stats.tx_unicast = 0;
> + rtwvif->stats.rx_unicast = 0;
> + rtwvif->stats.tx_cnt = 0;
> + rtwvif->stats.rx_cnt = 0;
> + rtwvif->in_lps = false;
> + rtwvif->conf = &rtw_vif_port[port];
> +
> + mutex_lock(&rtwdev->mutex);
> +
> + switch (vif->type) {
> + case NL80211_IFTYPE_AP:
> + case NL80211_IFTYPE_MESH_POINT:
> + net_type = RTW_NET_AP_MODE;
> + break;
> + case NL80211_IFTYPE_ADHOC:
> + net_type = RTW_NET_AD_HOC;
> + break;
> + case NL80211_IFTYPE_STATION:
> + default:
> + net_type = RTW_NET_NO_LINK;
> + break;
> + }
> +
> + ether_addr_copy(rtwvif->mac_addr, vif->addr);
> + config |= PORT_SET_MAC_ADDR;
> + rtwvif->net_type = net_type;
> + config |= PORT_SET_NET_TYPE;
> + rtw_vif_port_config(rtwdev, rtwvif, config);
> +
> + mutex_unlock(&rtwdev->mutex);
> +
> + rtw_info(rtwdev, "start vif %pM on port %d\n", vif->addr, rtwvif->port);
I think this somewhat spammy. And looking at other uses of rtw_info():
mac80211.c:157: rtw_info(rtwdev, "start vif %pM on port %d\n", vif->addr,
rtwvif->port);
mac80211.c:168: rtw_info(rtwdev, "stop vif %pM on port %d\n", vif->addr,
rtwvif->port);
mac80211.c:318: rtw_info(rtwdev, "sta %pM joined with macid %d\n",
mac80211.c:340: rtw_info(rtwdev, "sta %pM with macid %d left\n",
rtw8822b.c:936: rtw_info(rtwdev, "unsupport tx path, set to default
path ab\n");
rtw8822b.c:940: rtw_info(rtwdev, "unsupport rx path, set to default
path ab\n");
I would just convert the last two to warning level, assuming those cases
do not happen normally. And the rest would be better as debug messages
to keep the dmesg clean.
--
Kalle Valo
