On 14/05/2019 08:52, Sedat Dilek wrote:
[ ... ]
>>> Please give this a try and report.
>>
>> My laptop is the first one I have with a NFC reader, so I'm not used to
>> test this as it was not working yet.
>>
>> I booted the machine with a 5.1.1, the series applied on top, and the
>> config options set as mentioned above.
>>
>> The nxp-nci kernel module is loaded and neard is installed.
>>
>> I used the sniffing tool with the command libnfc -d nfc0 -n but when
>> passing my NFC devices on the laptop's NFC mark, nothing happens.
>>
>> Is that correct?
>>
>
> Hi Daniel,
>
> I am new to the topic Linux NFC.
>
> I have installed neard (daemon) v0.16 and neard-tools from Debian/buster
> AMD64.
>
> root@iniza:~# systemctl is-active neard.service
> active
Same for me
> root@iniza:~# nfctool --list
> nfc0:
> Tags: [ ]
> Devices: [ ]
> Protocols: [ Felica MIFARE Jewel ISO-DEP NFC-DEP ]
> Powered: No
> RF Mode: None
> lto: 150
> rw: 15
> miux: 2047
I have:
nfc0:
Tags: [ ]
Devices: [ ]
Protocols: [ Felica MIFARE Jewel ISO-DEP NFC-DEP ]
Powered: Yes
RF Mode: None
lto: 150
rw: 15
miux: 2047
The powered field is different.
> root@iniza:~# nfctool --poll -d nfc0
> Start polling on nfc0 as initiator
>
I have:
Protocol error
And the dmesg show me the errors related to nci:
[ 343.056021] nci: nci_ntf_packet: unknown ntf opcode 0x0
...
[31611.394308] nci: nci_start_poll: failed to set local general bytes
--
<http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs
Follow Linaro: <http://www.facebook.com/pages/Linaro> Facebook |
<http://twitter.com/#!/linaroorg> Twitter |
<http://www.linaro.org/linaro-blog/> Blog
