For the external PA (TSSI OFF) case, the target power needs to be read from a different location in EEPROM
Signed-off-by: Felix Fietkau <[email protected]> --- v2: - fix patch prefix - limit change to mt7603 (mt7628 does not have this eeprom field) drivers/net/wireless/mediatek/mt76/mt7603/eeprom.h | 2 ++ drivers/net/wireless/mediatek/mt76/mt7603/init.c | 4 ++++ 2 files changed, 6 insertions(+) diff --git a/drivers/net/wireless/mediatek/mt76/mt7603/eeprom.h b/drivers/net/wireless/mediatek/mt76/mt7603/eeprom.h index f27b99b7e359..b893facfba48 100644 --- a/drivers/net/wireless/mediatek/mt76/mt7603/eeprom.h +++ b/drivers/net/wireless/mediatek/mt76/mt7603/eeprom.h @@ -69,6 +69,8 @@ enum mt7603_eeprom_field { MT_EE_CP_FT_VERSION = 0x0f0, + MT_EE_TX_POWER_TSSI_OFF = 0x0f2, + MT_EE_XTAL_FREQ_OFFSET = 0x0f4, MT_EE_XTAL_TRIM_2_COMP = 0x0f5, MT_EE_XTAL_TRIM_3_COMP = 0x0f6, diff --git a/drivers/net/wireless/mediatek/mt76/mt7603/init.c b/drivers/net/wireless/mediatek/mt76/mt7603/init.c index 4e269044f8a4..43baad7fd082 100644 --- a/drivers/net/wireless/mediatek/mt76/mt7603/init.c +++ b/drivers/net/wireless/mediatek/mt76/mt7603/init.c @@ -465,9 +465,13 @@ mt7603_init_txpower(struct mt7603_dev *dev, u8 *eeprom = (u8 *)dev->mt76.eeprom.data; int target_power = eeprom[MT_EE_TX_POWER_0_START_2G + 2] & ~BIT(7); u8 *rate_power = &eeprom[MT_EE_TX_POWER_CCK]; + bool ext_pa = eeprom[MT_EE_NIC_CONF_0 + 1] & BIT(1); int max_offset, cur_offset; int i; + if (ext_pa && is_mt7603(dev)) + target_power = eeprom[MT_EE_TX_POWER_TSSI_OFF] & ~BIT(7); + if (target_power & BIT(6)) target_power = -(target_power & GENMASK(5, 0)); -- 2.17.0
