From: Ganapathi Kondraju <[email protected]> Issue: RS-9116 Card is not responding after firmware got loaded.
Root cause: After firmware got loaded, we need to reset the program counter and few device specific registers. Those registers were not resetted properly. Fix: Properly resetting those registers. Signed-off-by: Ganapathi Kondraju <[email protected]> --- drivers/net/wireless/rsi/rsi_91x_sdio.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-) diff --git a/drivers/net/wireless/rsi/rsi_91x_sdio.c b/drivers/net/wireless/rsi/rsi_91x_sdio.c index b42cd50..1ab2bd2 100644 --- a/drivers/net/wireless/rsi/rsi_91x_sdio.c +++ b/drivers/net/wireless/rsi/rsi_91x_sdio.c @@ -944,7 +944,7 @@ static int rsi_sdio_ta_reset(struct rsi_hw *adapter) put_unaligned_le32(TA_HOLD_THREAD_VALUE, data); addr = TA_HOLD_THREAD_REG | RSI_SD_REQUEST_MASTER; status = rsi_sdio_write_register_multiple(adapter, addr, - (u8 *)&data, + (u8 *)data, RSI_9116_REG_SIZE); if (status < 0) { rsi_dbg(ERR_ZONE, "Unable to hold TA threads\n"); @@ -954,7 +954,7 @@ static int rsi_sdio_ta_reset(struct rsi_hw *adapter) put_unaligned_le32(TA_SOFT_RST_CLR, data); addr = TA_SOFT_RESET_REG | RSI_SD_REQUEST_MASTER; status = rsi_sdio_write_register_multiple(adapter, addr, - (u8 *)&data, + (u8 *)data, RSI_9116_REG_SIZE); if (status < 0) { rsi_dbg(ERR_ZONE, "Unable to get TA out of reset\n"); @@ -964,7 +964,7 @@ static int rsi_sdio_ta_reset(struct rsi_hw *adapter) put_unaligned_le32(TA_PC_ZERO, data); addr = TA_TH0_PC_REG | RSI_SD_REQUEST_MASTER; status = rsi_sdio_write_register_multiple(adapter, addr, - (u8 *)&data, + (u8 *)data, RSI_9116_REG_SIZE); if (status < 0) { rsi_dbg(ERR_ZONE, "Unable to Reset TA PC value\n"); @@ -975,7 +975,7 @@ static int rsi_sdio_ta_reset(struct rsi_hw *adapter) put_unaligned_le32(TA_RELEASE_THREAD_VALUE, data); addr = TA_RELEASE_THREAD_REG | RSI_SD_REQUEST_MASTER; status = rsi_sdio_write_register_multiple(adapter, addr, - (u8 *)&data, + (u8 *)data, RSI_9116_REG_SIZE); if (status < 0) { rsi_dbg(ERR_ZONE, "Unable to release TA threads\n"); -- 2.5.5
