(patches split for easier review, see the cover letter for more)

Signed-off-by: Kalle Valo <[email protected]>
---
 drivers/net/wireless/ath/ath11k/mac.h | 145 ++++++++++++++++++++++++++++++++++
 1 file changed, 145 insertions(+)

diff --git a/drivers/net/wireless/ath/ath11k/mac.h 
b/drivers/net/wireless/ath/ath11k/mac.h
new file mode 100644
index 000000000000..f84af1fc4952
--- /dev/null
+++ b/drivers/net/wireless/ath/ath11k/mac.h
@@ -0,0 +1,145 @@
+/* SPDX-License-Identifier: BSD-3-Clause-Clear */
+/*
+ * Copyright (c) 2018-2019 The Linux Foundation. All rights reserved.
+ */
+
+#ifndef ATH11K_MAC_H
+#define ATH11K_MAC_H
+
+#include <net/mac80211.h>
+#include <net/cfg80211.h>
+
+struct ath11k;
+struct ath11k_base;
+
+struct ath11k_generic_iter {
+       struct ath11k *ar;
+       int ret;
+};
+
+/* number of failed packets (20 packets with 16 sw reties each) */
+#define ATH11K_KICKOUT_THRESHOLD               (20 * 16)
+
+/* Use insanely high numbers to make sure that the firmware implementation
+ * won't start, we have the same functionality already in hostapd. Unit
+ * is seconds.
+ */
+#define ATH11K_KEEPALIVE_MIN_IDLE              3747
+#define ATH11K_KEEPALIVE_MAX_IDLE              3895
+#define ATH11K_KEEPALIVE_MAX_UNRESPONSIVE      3900
+
+#define WMI_HOST_RC_DS_FLAG                    0x01
+#define WMI_HOST_RC_CW40_FLAG                  0x02
+#define WMI_HOST_RC_SGI_FLAG                   0x04
+#define WMI_HOST_RC_HT_FLAG                    0x08
+#define WMI_HOST_RC_RTSCTS_FLAG                        0x10
+#define WMI_HOST_RC_TX_STBC_FLAG               0x20
+#define WMI_HOST_RC_RX_STBC_FLAG               0xC0
+#define WMI_HOST_RC_RX_STBC_FLAG_S             6
+#define WMI_HOST_RC_WEP_TKIP_FLAG              0x100
+#define WMI_HOST_RC_TS_FLAG                    0x200
+#define WMI_HOST_RC_UAPSD_FLAG                 0x400
+
+#define WMI_HT_CAP_ENABLED                     0x0001
+#define WMI_HT_CAP_HT20_SGI                    0x0002
+#define WMI_HT_CAP_DYNAMIC_SMPS                        0x0004
+#define WMI_HT_CAP_TX_STBC                     0x0008
+#define WMI_HT_CAP_TX_STBC_MASK_SHIFT          3
+#define WMI_HT_CAP_RX_STBC                     0x0030
+#define WMI_HT_CAP_RX_STBC_MASK_SHIFT          4
+#define WMI_HT_CAP_LDPC                                0x0040
+#define WMI_HT_CAP_L_SIG_TXOP_PROT             0x0080
+#define WMI_HT_CAP_MPDU_DENSITY                        0x0700
+#define WMI_HT_CAP_MPDU_DENSITY_MASK_SHIFT     8
+#define WMI_HT_CAP_HT40_SGI                    0x0800
+#define WMI_HT_CAP_RX_LDPC                     0x1000
+#define WMI_HT_CAP_TX_LDPC                     0x2000
+#define WMI_HT_CAP_IBF_BFER                    0x4000
+
+/* These macros should be used when we wish to advertise STBC support for
+ * only 1SS or 2SS or 3SS.
+ */
+#define WMI_HT_CAP_RX_STBC_1SS                 0x0010
+#define WMI_HT_CAP_RX_STBC_2SS                 0x0020
+#define WMI_HT_CAP_RX_STBC_3SS                 0x0030
+
+#define WMI_HT_CAP_DEFAULT_ALL (WMI_HT_CAP_ENABLED    | \
+                               WMI_HT_CAP_HT20_SGI   | \
+                               WMI_HT_CAP_HT40_SGI   | \
+                               WMI_HT_CAP_TX_STBC    | \
+                               WMI_HT_CAP_RX_STBC    | \
+                               WMI_HT_CAP_LDPC)
+
+#define WMI_VHT_CAP_MAX_MPDU_LEN_MASK          0x00000003
+#define WMI_VHT_CAP_RX_LDPC                    0x00000010
+#define WMI_VHT_CAP_SGI_80MHZ                  0x00000020
+#define WMI_VHT_CAP_SGI_160MHZ                 0x00000040
+#define WMI_VHT_CAP_TX_STBC                    0x00000080
+#define WMI_VHT_CAP_RX_STBC_MASK               0x00000300
+#define WMI_VHT_CAP_RX_STBC_MASK_SHIFT         8
+#define WMI_VHT_CAP_SU_BFER                    0x00000800
+#define WMI_VHT_CAP_SU_BFEE                    0x00001000
+#define WMI_VHT_CAP_MAX_CS_ANT_MASK            0x0000E000
+#define WMI_VHT_CAP_MAX_CS_ANT_MASK_SHIFT      13
+#define WMI_VHT_CAP_MAX_SND_DIM_MASK           0x00070000
+#define WMI_VHT_CAP_MAX_SND_DIM_MASK_SHIFT     16
+#define WMI_VHT_CAP_MU_BFER                    0x00080000
+#define WMI_VHT_CAP_MU_BFEE                    0x00100000
+#define WMI_VHT_CAP_MAX_AMPDU_LEN_EXP          0x03800000
+#define WMI_VHT_CAP_MAX_AMPDU_LEN_EXP_SHIT     23
+#define WMI_VHT_CAP_RX_FIXED_ANT               0x10000000
+#define WMI_VHT_CAP_TX_FIXED_ANT               0x20000000
+
+#define WMI_VHT_CAP_MAX_MPDU_LEN_11454         0x00000002
+
+/* These macros should be used when we wish to advertise STBC support for
+ * only 1SS or 2SS or 3SS.
+ */
+#define WMI_VHT_CAP_RX_STBC_1SS                        0x00000100
+#define WMI_VHT_CAP_RX_STBC_2SS                        0x00000200
+#define WMI_VHT_CAP_RX_STBC_3SS                        0x00000300
+
+#define WMI_VHT_CAP_DEFAULT_ALL (WMI_VHT_CAP_MAX_MPDU_LEN_11454  | \
+                                WMI_VHT_CAP_SGI_80MHZ      |       \
+                                WMI_VHT_CAP_TX_STBC        |       \
+                                WMI_VHT_CAP_RX_STBC_MASK   |       \
+                                WMI_VHT_CAP_RX_LDPC        |       \
+                                WMI_VHT_CAP_MAX_AMPDU_LEN_EXP   |  \
+                                WMI_VHT_CAP_RX_FIXED_ANT   |       \
+                                WMI_VHT_CAP_TX_FIXED_ANT)
+
+/* FIXME: should these be in ieee80211.h? */
+#define IEEE80211_VHT_MCS_SUPPORT_0_11_MASK    GENMASK(23, 16)
+#define IEEE80211_DISABLE_VHT_MCS_SUPPORT_0_11 BIT(24)
+
+#define WMI_MAX_SPATIAL_STREAM                 3
+
+#define ATH11K_CHAN_WIDTH_NUM                  8
+
+extern const struct htt_rx_ring_tlv_filter 
ath11k_mac_mon_status_filter_default;
+
+int ath11k_mac_create(struct ath11k_base *ab);
+void ath11k_mac_destroy(struct ath11k_base *ab);
+void ath11k_mac_unregister(struct ath11k_base *ab);
+int ath11k_mac_hw_ratecode_to_legacy_rate(u8 hw_rc, u8 preamble, u8 *rateidx,
+                                         u16 *rate);
+u8 ath11k_mac_bitrate_to_idx(const struct ieee80211_supported_band *sband,
+                            u32 bitrate);
+u8 ath11k_mac_hw_rate_to_idx(const struct ieee80211_supported_band *sband,
+                            u8 hw_rate, bool cck);
+
+void __ath11k_mac_scan_finish(struct ath11k *ar);
+void ath11k_mac_scan_finish(struct ath11k *ar);
+
+struct ath11k_vif *ath11k_mac_get_arvif(struct ath11k *ar, u32 vdev_id);
+struct ath11k_vif *ath11k_mac_get_arvif_by_vdev_id(struct ath11k_base *ab,
+                                                  u32 vdev_id);
+struct ath11k *ath11k_mac_get_ar_by_vdev_id(struct ath11k_base *ab, u32 
vdev_id);
+struct ath11k *ath11k_mac_get_ar_by_pdev_id(struct ath11k_base *ab, u32 
pdev_id);
+struct ath11k *ath11k_mac_get_ar_vdev_stop_status(struct ath11k_base *ab,
+                                                 u32 vdev_id);
+
+void ath11k_mac_drain_tx(struct ath11k *ar);
+void ath11k_mac_peer_cleanup_all(struct ath11k *ar);
+int ath11k_mac_tx_mgmt_pending_free(int buf_id, void *skb, void *ctx);
+#endif

Reply via email to