Hello,
I'm having a problem setting up X11 for a motherboard with a CL-GD5428 on
board.
At the moment I can use 8bpp without problems, however the board can
support 24bpp. In order to access the higher colour depth I must provide
the base address that the card maps the frame buffer to.
The following /etc/X11/XF86Config entries have been tried without success;
MemBase 0x00e00000
MemBase 0x04e00000
MemBase 0x04000000
MemBase 0x2000000
MemBase 0x03e00000
Motherboard details as follows;
Packard-Bell PB450MPA 486 DX-4-100.
Video chip is a Cirrus Logic CL-GD5428 on a Vesa Local Bus.
1 Mb on board video memory.
I would be most grateful for any assistance with this problem.
Regards.
Martin Fenelon. G4WJE.
PGP Key Fingerprint = 88 0D 12 63 BD 9F 8E 38 EF C8 B1 A5 CD 85 E4 9D
