This looks ok to me, but I'll wait for the v3 of the BSP branch changes before doing the merge.
Bruce On Wed, Dec 16, 2020 at 3:34 AM <quanyang.w...@windriver.com> wrote: > > From: Quanyang Wang <quanyang.w...@windriver.com> > > Since we use si5341 as clk source, then enable CONFIG_COMMON_CLK_SI5341 > to use its driver. And in order to use mainline dpdma driver, we need > enable CONFIG_XILINX_ZYNQMP_DPDMA. > > Signed-off-by: Quanyang Wang <quanyang.w...@windriver.com> > --- > bsp/xilinx-zynqmp/xilinx-zynqmp.cfg | 3 ++- > 1 file changed, 2 insertions(+), 1 deletion(-) > > diff --git a/bsp/xilinx-zynqmp/xilinx-zynqmp.cfg > b/bsp/xilinx-zynqmp/xilinx-zynqmp.cfg > index 747ca9d5c..e37c1f73b 100644 > --- a/bsp/xilinx-zynqmp/xilinx-zynqmp.cfg > +++ b/bsp/xilinx-zynqmp/xilinx-zynqmp.cfg > @@ -124,6 +124,7 @@ CONFIG_UIO_XILINX_APM=y > CONFIG_COMMON_CLK=y > CONFIG_COMMON_CLK_SI570=y > CONFIG_COMMON_CLK_SI5324=y > +CONFIG_COMMON_CLK_SI5341=y > CONFIG_COMMON_CLK_ZYNQMP=y > CONFIG_COMMON_CLK_XLNX_CLKWZRD=y > CONFIG_IOMMU_API=y > @@ -207,7 +208,7 @@ CONFIG_DRM_XLNX_SDI=y > CONFIG_DRM_XLNX_BRIDGE_CSC=y > CONFIG_DRM_XLNX_BRIDGE_SCALER=y > CONFIG_XILINX_FRMBUF=y > -CONFIG_XILINX_DPDMA=y > +CONFIG_XILINX_ZYNQMP_DPDMA=y > CONFIG_DRM_XILINX_SDI=y > CONFIG_SOUND=y > CONFIG_SND=y > -- > 2.25.1 > -- - Thou shalt not follow the NULL pointer, for chaos and madness await thee at its end - "Use the force Harry" - Gandalf, Star Trek II
-=-=-=-=-=-=-=-=-=-=-=- Links: You receive all messages sent to this group. View/Reply Online (#9289): https://lists.yoctoproject.org/g/linux-yocto/message/9289 Mute This Topic: https://lists.yoctoproject.org/mt/78996619/21656 Group Owner: linux-yocto+ow...@lists.yoctoproject.org Unsubscribe: https://lists.yoctoproject.org/g/linux-yocto/unsub [arch...@mail-archive.com] -=-=-=-=-=-=-=-=-=-=-=-