merged. Bruce
In message: [PATCH] nxp-s32g: update to compatile with SDK BSP38 on 03/11/2023 Zhantao Tang wrote: > This patch updates v6.1 kernel cache for nxp-s32g to compatible with SDK > BSP38, and the related configs refers to both LTS22 and SDK BSP38. > > Moreover, the CONFIG_NVMEM_SCMI is added to support SCMI protocol/transport > style, but now the ATF transport side is not ready, and it will cause > the following panic when STR: > > Unable to handle kernel paging request at virtual address > ffffffffffffffe8 > Mem abort info: > ESR = 0x0000000096000005 > EC = 0x25: DABT (current EL), IL = 32 bits > SET = 0, FnV = 0 > EA = 0, S1PTW = 0 > FSC = 0x05: level 1 translation fault > Data abort info: > ISV = 0, ISS = 0x00000005 > CM = 0, WnR = 0 > swapper pgtable: 4k pages, 39-bit VAs, pgdp=000000008b83e000 > [ffffffffffffffe8] pgd=0000000000000000, p4d=0000000000000000, > pud=0000000000000000 > Internal error: Oops: 96000005 [#1] PREEMPT SMP > Modules linked in: 8021q llce_can llce_mailbox pfeng(O) llce_core > sch_fq_codel openvswitch nsh nf_conncount nf_nat nf_conntrack nf_defrag_ipv6 > nf_defrag_ipv4 > CPU: 1 PID: 961 Comm: rtcwake Tainted: G O > 5.15.129-yocto-standard #1 > Hardware name: NXP S32G274A-RDB2 (DT) > pstate: 00000005 (nzcv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) > pc : scmi_dev_suspend+0xc/0x40 > lr : __device_suspend+0x2bc/0x444 > sp : ffffffc00d13ba90 > x29: ffffffc00d13ba90 x28: ffffffc008ad78c4 x27: ffffff880ba2a260 > x26: 0000000000000002 x25: ffffffc009d4619c x24: ffffffc008d5b6e0 > x23: ffffff880ba28930 x22: 0000000000000000 x21: 0000000000000002 > x20: ffffffc00b299d60 x19: ffffff880ba28810 x18: ffffffffffffffff > x17: 203a7367616c6620 x16: 7265766972642064 x15: ffffffc00aa968c2 > x14: 0000000000000000 x13: 30203a7367616c66 x12: 2072657669726420 > x11: 00000000000000f2 x10: ffffffc009d46d78 x9 : ffffffc008ad773c > x8 : 00000000fffff287 x7 : ffffffc009d9ed78 x6 : 0000000000000001 > x5 : ffffff880ba28810 x4 : 0000000000000001 x3 : ffffffc009769008 > x2 : 0000000000000000 x1 : 0000000000000002 x0 : ffffff880ba28810 > Call trace: > scmi_dev_suspend+0xc/0x40 > dpm_suspend+0x184/0x26c > dpm_suspend_start+0x84/0xa0 > suspend_devices_and_enter+0x148/0x20c > enter_state+0x148/0x1dc > pm_suspend+0x60/0xf0 > state_store+0x94/0x120 > kobj_attr_store+0x18/0x30 > sysfs_kf_write+0x54/0x80 > kernfs_fop_write_iter+0x128/0x1c0 > new_sync_write+0xf0/0x18c > vfs_write+0x1c4/0x220 > ksys_write+0x70/0x100 > __arm64_sys_write+0x24/0x30 > invoke_syscall+0x5c/0x130 > el0_svc_common.constprop.0+0x68/0x124 > do_el0_svc+0x4c/0xb0 > el0_svc+0x54/0x110 > el0t_64_sync_handler+0xa4/0x130 > el0t_64_sync+0x1a0/0x1a4 > Code: d503201f aa1e03e9 d503201f f9403402 (f85e8042) > ---[ end trace b5605e874e1249c4 ]--- > Kernel panic - not syncing: Oops: Fatal exception > SMP: stopping secondary CPUs > Kernel Offset: disabled > CPU features: 0x9,00002001,20000842 > Memory Limit: none > ---[ end Kernel panic - not syncing: Oops: Fatal exception ]--- > > So disable this config by default to fix the above issues, and it will > be enabled when related codes all ready. > > Signed-off-by: Zhantao Tang <zhantao.t...@windriver.com> > --- > bsp/nxp-s32g/nxp-s32g.cfg | 10 +++++++++- > 1 file changed, 9 insertions(+), 1 deletion(-) > > diff --git a/bsp/nxp-s32g/nxp-s32g.cfg b/bsp/nxp-s32g/nxp-s32g.cfg > index 1b8eae74..df6458b8 100644 > --- a/bsp/nxp-s32g/nxp-s32g.cfg > +++ b/bsp/nxp-s32g/nxp-s32g.cfg > @@ -19,7 +19,10 @@ CONFIG_SOC_S32CC=y > CONFIG_SCHED_MC=y > CONFIG_ARM_SMMU=y > > +CONFIG_NXP_GLOBAL_TIME_STM=y > + > CONFIG_PINCTRL_S32CC=y > +CONFIG_PINCTRL_SCMI=y > > CONFIG_CPU_IDLE=y > CONFIG_ARM_PSCI_CPUIDLE=y > @@ -52,6 +55,7 @@ CONFIG_NET_DSA_TAG_SJA1105=y > CONFIG_NXP_TJA11XX_PHY=y > CONFIG_NET_DSA_SJA1105=y > CONFIG_NET_DSA_SJA1105_PTP=y > +CONFIG_BRIDGE_VLAN_FILTERING=y > > #Serial > CONFIG_SERIAL_AMBA_PL011=y > @@ -65,6 +69,8 @@ CONFIG_SPI_FSL_DSPI=y > CONFIG_SPI_SPIDEV=y > CONFIG_GPIO_CDEV=y > CONFIG_GPIO_S32CC=y > +CONFIG_GPIO_SCMI=y > +CONFIG_SENSORS_INA2XX=y > > #PCIE > CONFIG_PCI=y > @@ -119,7 +125,7 @@ CONFIG_INPUT_UINPUT=y > > # Thermal > CONFIG_THERMAL=y > -CONFIG_S32CC_THERMAL=y > +CONFIG_QORIQ_THERMAL=y > > # ADC > CONFIG_IIO=y > @@ -156,6 +162,8 @@ CONFIG_S32CC_WDT=y > CONFIG_BLK_DEV_NVME=y > CONFIG_NVME_TARGET=y > CONFIG_NVMEM_S32CC_SIUL2=y > +CONFIG_NVMEM_S32CC_OCOTP=y > +# CONFIG_NVMEM_SCMI is not set > > #LLCE > CONFIG_CAN_LLCE=y > -- > 2.25.1 >
-=-=-=-=-=-=-=-=-=-=-=- Links: You receive all messages sent to this group. View/Reply Online (#13268): https://lists.yoctoproject.org/g/linux-yocto/message/13268 Mute This Topic: https://lists.yoctoproject.org/mt/102359525/21656 Group Owner: linux-yocto+ow...@lists.yoctoproject.org Unsubscribe: https://lists.yoctoproject.org/g/linux-yocto/leave/6687884/21656/624485779/xyzzy [arch...@mail-archive.com] -=-=-=-=-=-=-=-=-=-=-=-