Signed-off-by: Paul Butler <paul.but...@windriver.com>
---
arch/arm/mach-axxia/hotplug.c | 2 +-
arch/arm/mach-axxia/pci.c | 4 +---
2 files changed, 2 insertions(+), 4 deletions(-)
diff --git a/arch/arm/mach-axxia/hotplug.c b/arch/arm/mach-axxia/hotplug.c
index c504a72..9ecd64d 100644
--- a/arch/arm/mach-axxia/hotplug.c
+++ b/arch/arm/mach-axxia/hotplug.c
@@ -56,7 +56,7 @@ static inline void cpu_leave_lowpower(void)
: "cc");
}
-static inline void platform_do_lowpower(unsigned int cpu, int *spurious)
+static void __ref platform_do_lowpower(unsigned int cpu, int *spurious)
{
/*
* there is no power-control hardware on this platform, so all
diff --git a/arch/arm/mach-axxia/pci.c b/arch/arm/mach-axxia/pci.c
index 5ba4b80..b0f1a9a 100644
--- a/arch/arm/mach-axxia/pci.c
+++ b/arch/arm/mach-axxia/pci.c
@@ -481,8 +481,6 @@ static irqreturn_t
acp_pcie_MSI_isr(int irq, void *arg)
{
u32 intr_status;
- u32 msg_fifo_stat;
- u32 msg_fifo_info;
u8 msiIntr = 0, bit = 0;
struct axxia_pciex_port *port = (struct axxia_pciex_port *)arg;
void __iomem *mbase = (void __iomem *)port->cfg_addr;
@@ -777,7 +775,7 @@ DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI_ANY_ID,
axxia_pcie_msi_enable);
/* Port definition struct
* Please note: PEI core#1 is not used in AXM5500 */
-static struct hw_pci axxia_pcie_hw[] = {
+static struct hw_pci __refdata axxia_pcie_hw[] = {
[0] = {
.nr_controllers = 1,
.domain = 0,
--
1.8.3
_______________________________________________
linux-yocto mailing list
linux-yocto@yoctoproject.org
https://lists.yoctoproject.org/listinfo/linux-yocto
