On 13-05-27 12:55 PM, Paul Butler wrote:
Creating a new branch in linux-yocto_3.4 for tracking LSI BSP changes. Branched from standard/base at commit fff57da7886cf5e99c07adf6649610cb1cd89330
I added comments throughout the code. There are some minor cleanups and references that are required. We need to continue to work this code into a format that is destined for the mainline kernel. Even my comments are not complete from that point of view, but they are a step along the road. Cheers, Bruce
Benjamin Herrenschmidt (1): powerpc/mpic: Create a revmap with enough entries for IPIs and timers David Mercado (4): LSI axm55xx: Add multi-cluster support for up to 16 cores LSI axm55xx: Fix boot issues with PREMPT_RT kernel LSI axm55xx: Add ability to parse specific core numbers in the DTB LSI acp34xx: Fixed build error in acp34xx serial driver Fredrik Markstr (1): usb/host/ehci-ci13612: stop accessing the secondary register space Jiang Lu (27): arch/arm: Updating Kconfig and Makefile for axxia arch/arm/tools/mach-types: adding axxia in the mach-types ppc/47x: add cputable entries for ACP 34xx powerpc/47x: add acpx1 board support ACP34xx:Fix a few mismatch section warnings powerpc/acp34xx: add clk_get/_rate support for acp board LSI:ACP34xx:standardize debug macro lsi/ncr: add support to read/write access to configuration ring resources lsi/nand: add acp3400 nand flash controller support lsi/ubootenv: add read access to the uboot env lsi/nand:Use EP501G1_NAND_1BIT_ECC0_STATUS to check HW ECC tty:ACP serial:extract clock freq from device tree kgdboc, acp serial: rx polling hook for the acp_serial driver drivers/dma: Add Common LSI-DMA driver for ACP34xx and AXM55xx. PowerPC:ACP34xx:Add app350 i2c controller driver SPI:pl022:Update driver to support of-platform drivers PowerPC:ACP34xx:Add SPI at25 eeprom support powerpc/4xx: add support for the PCIe controller on ACP34xx drivers/net: Added support for acp network driver net/acp: add the netpoll support for acp device LSI:NIC:Using default value when ubootenv driver not present powerpc/47x: Kernel support for KEXEC powerpc/44x: kexec for SMP 47x GPIO:pl061:Update driver to support of-platform drivers PowerPC:ACP34xx:Add support for pl061 gpio driver ACP34xx:Add device tree for ACP344x v2 board Acp34xx:disable device when enabled set to 0 in dts John Jacques (7): arm/boot: Boot loader emulation code for AXM5516. arm/dts: add dts for LSI AXM5516 simulation and emulation/asic. arm/boot: change target name arm/boot: Updates for Emulation Bringup. arm/boot: Fix the problem with device tree loading in emulation arm/boot: add earlyprintk in the bootargs arm/boot: Use supersections for the early page table in the armv7 case Kevin Hao (7): usb/ehci-ci13612: add support for ci13612 host controller usb/ehci-ci13612: use the of match method to probe the hcd usb/ehci-ci13612: use dynamic virtual address to map the hcd registers ppc/476: workaround for erratum #40 on dd2 core powerpc/44x: allow the kernel to be run from a non-zero physical address powerpc/acpx1: add early debug support for acpx1 board powerpc/acpx1: make udbg do IO access in AS1 Michael Bringmann (9): drivers/i2c/ai2c: add dts support in the driver mach-axxia/i2c: fix editing typo. mach-axxia/i2c: remove unnecessary code arm/dts: add configurations for I2C busses mach-axxia/i2c: fix i2c platform data structure drivers/i2c/ai2c: add more dtb support drivers/i2c/ai2c: remove acp34xx from Makefile drivers/i2c/ai2c: Remove references to outdated types drivers/i2c/ai2c: Fix compile warning about unneeded label Paul Butler (23): drivers/leds: Added support for RBS leds drivers/hwmon: add support for Analog Devices ADT75 drivers/i2c/busses: adding ai2c driver drivers/usb/host/ehci-ci13612.c: replaced bugzilla comments drivers/usb/host/ehci-ci13612.c: fix a burst size issue fs/vmfs: adding arm vmfs patch arch/arm/boot/dts: adding new dts files arch/arm/boot/fmboot: adding support for Fast Models arch/arm/mach-axxia: adding mach-axxia support arch/arm/mach-axxia/axxia.c: Chip select control for SPI devices. arch/arm/mach-axxia/Makefile: adding i2c arch/arm/mm: proc-v7-2level.S and 3level - checking coherent walk bits arch/arm/mach-axxia: adding i2c code include/linux/i2c-axxia.h: added missing file to fix build bug arch/arm/mach-axxia: fixed section mismatch warnings arch/arm/mach-axxia: pci.c fixes incorrect device reference arm/asm/io.h: let ioremap() fall back to platform specific one drivers/tty: Add support for lsi acp serial driver and console drivers/usb: ehci-ci13612.c replaced hard-coded address and irq to use dtb drivers/crypto/amcc/crypto4xx_core.c: added include for linux/module.h LSI acp34xx: Major rework of lsi_acp_net.c Ethernet driver drivers/crypto/amcc: removed section mismatch warning powerpc: fix section mismatch warnings SangeethaRao (2): arm/dts: updating PCIe related files for TPAGE and BAR0 arm/dts: updated for PCIe node name Suzuki Poulose (1): powerpc/47x: Enable CRASH_DUMP Wang Hui (2): drivers/i2c/ai2c: remove default y from Kconfig arm: fmboot: make the fmboot image Wei Yang (2): powerpc/44x: Fix/Initialize PID to kernel PID before the TLB search powerpc/prom: remove the illegal reversed memory region yhe (1): kexec/44x: avoid cpu spin code flushed by new kernel _______________________________________________ linux-yocto mailing list linux-yocto@yoctoproject.org https://lists.yoctoproject.org/listinfo/linux-yocto
_______________________________________________ linux-yocto mailing list linux-yocto@yoctoproject.org https://lists.yoctoproject.org/listinfo/linux-yocto