Thanks a lot for the info, Bruce.
Regards, B.Sathish Kumar -----Original Message----- From: Bruce Ashfield [mailto:bruce.ashfi...@windriver.com] Sent: Wednesday, February 05, 2014 9:48 PM To: Sathish Kumar Balasubramaniam -ERS, HCL Tech; linux-yocto@yoctoproject.org Subject: Re: [linux-yocto] How to upgrade to linux kernel version 3.8 from 3.4 On 14-02-05 09:41 AM, Sathish Kumar Balasubramaniam -ERS, HCL Tech wrote: > Hi, > > The following Renesas BSP is based on linux-yocto 3.4% and built with > dora branch of poky and 5.0.1 of meta-ivi > > https://github.com/rCarUSA/GENIVI-Gemini-Release/tree/master/meta-rcar > -h2-lager > > ---------------------------------------------------------------------- > ----------------- > > Below lines from meta-rcar-h2-lager/conf/machine/rcar-h2-lager.conf > file > > ... > > PREFERRED_PROVIDER_virtual/kernel ?= "linux-yocto" > > PREFERRED_VERSION_linux-mainline ?= "3.4%" > > ... > > ---------------------------------------------------------------------- > ----------------- > > I saw the following file which is related to linux-yocto 3.8 > > poky/meta-yocto-bsp/recipes-kernel/linux/linux-yocto_3.8.bbappend > > What do I need to do to upgrade the Renesas BSP to linux-yocto 3.8 > from the current 3.4 ? I had a look at the recipe you referenced, and while it uses the linux-yocto name, it isn't referencing the linux-yocto kernel tree or a BSP definition in the tree. If it had referenced linux-yocto, I would have been carrying the support forward to 3.8, 3.10, etc. If you have a choice, I'd recommend 3.10 over 3.8 .. but you may not have a choice. Back to the point. In this case, your upgrade path would be to check with the maintainer/author of the recipe and the renasas tree referenced in that recipe. If they have something newer .. you are good to go, otherwise, you'll need to see what sort of patches need to be ported to uprev. Cheers, Bruce > > Thanks, > > B.Sathish Kumar > > > > ::DISCLAIMER:: > ---------------------------------------------------------------------- > ---------------------------------------------------------------------- > -------- > > The contents of this e-mail and any attachment(s) are confidential and > intended for the named recipient(s) only. > E-mail transmission is not guaranteed to be secure or error-free as > information could be intercepted, corrupted, lost, destroyed, arrive > late or incomplete, or may contain viruses in transmission. The e mail > and its contents (with or without referred errors) shall therefore not > attach any liability on the originator or HCL or its affiliates. > Views or opinions, if any, presented in this email are solely those of > the author and may not necessarily reflect the views or opinions of > HCL or its affiliates. Any form of reproduction, dissemination, > copying, disclosure, modification, distribution and / or publication > of this message without the prior written consent of authorized > representative of HCL is strictly prohibited. If you have received > this email in error please delete it and notify the sender > immediately. > Before opening any email and/or attachments, please check them for > viruses and other defects. > > ---------------------------------------------------------------------- > ---------------------------------------------------------------------- > -------- > > > > _______________________________________________ > linux-yocto mailing list > linux-yocto@yoctoproject.org > https://lists.yoctoproject.org/listinfo/linux-yocto > _______________________________________________ linux-yocto mailing list linux-yocto@yoctoproject.org https://lists.yoctoproject.org/listinfo/linux-yocto
