This file was updated with the checkpatch and the appropriate
changes were made to support kernel.org syntax
---
 drivers/i2c/busses/i2c-axxia.c |   26 ++++++++++++--------------
 1 file changed, 12 insertions(+), 14 deletions(-)

diff --git a/drivers/i2c/busses/i2c-axxia.c b/drivers/i2c/busses/i2c-axxia.c
index a46d2d3..f536dc4 100644
--- a/drivers/i2c/busses/i2c-axxia.c
+++ b/drivers/i2c/busses/i2c-axxia.c
@@ -207,14 +207,13 @@ axxia_i2c_init(struct axxia_i2c_dev *idev)
        /*
           Find the prescaler value that makes tmo_clk fit in 15-bits counter.
         */
-       for (prescale=0; prescale < 15; ++prescale) {
+       for (prescale = 0; prescale < 15; ++prescale) {
                if (tmo_clk <= 0x7fff)
                        break;
                tmo_clk >>= 1;
        }
-       if (tmo_clk > 0x7fff) {
+       if (tmo_clk > 0x7fff)
                tmo_clk = 0x7fff;
-       }
 
        /* Prescale divider (log2) */
        writel(prescale, &idev->regs->timer_clock_div);
@@ -358,9 +357,8 @@ axxia_i2c_isr(int irq, void *_dev)
        }
 
        /* RX FIFO needs service? */
-       if (i2c_m_rd(idev->msg) && (status & MST_STATUS_RFL)) {
+       if (i2c_m_rd(idev->msg) && (status & MST_STATUS_RFL))
                axxia_i2c_empty_rx_fifo(idev);
-       }
 
        /* TX FIFO needs service? */
        if (!i2c_m_rd(idev->msg) && (status & MST_STATUS_TFL)) {
@@ -421,7 +419,8 @@ axxia_i2c_xfer_msg(struct axxia_i2c_dev *idev, struct 
i2c_msg *msg)
 
        i2c_int_enable(idev, int_mask);
 
-       ret = wait_for_completion_timeout(&idev->msg_complete, 
I2C_XFER_TIMEOUT);
+       ret = wait_for_completion_timeout(&idev->msg_complete,
+                       I2C_XFER_TIMEOUT);
 
        i2c_int_disable(idev, int_mask);
 
@@ -452,11 +451,11 @@ axxia_i2c_stop(struct axxia_i2c_dev *idev)
        /* Issue stop */
        writel(0xb, &idev->regs->mst_command);
        i2c_int_enable(idev, int_mask);
-       ret = wait_for_completion_timeout(&idev->msg_complete, 
I2C_STOP_TIMEOUT);
+       ret = wait_for_completion_timeout(&idev->msg_complete,
+                       I2C_STOP_TIMEOUT);
        i2c_int_disable(idev, int_mask);
-       if (ret == 0) {
+       if (ret == 0)
                return -ETIMEDOUT;
-       }
 
        WARN_ON(readl(&idev->regs->mst_command) & 0x8);
 
@@ -470,9 +469,8 @@ axxia_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg 
msgs[], int num)
        int i;
        int ret = 0;
 
-       for (i = 0; ret == 0 && i < num; i++) {
+       for (i = 0; ret == 0 && i < num; i++)
                ret = axxia_i2c_xfer_msg(idev, &msgs[i]);
-       }
 
        axxia_i2c_stop(idev);
 
@@ -482,10 +480,10 @@ axxia_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg 
msgs[], int num)
 static u32
 axxia_i2c_func(struct i2c_adapter *adap)
 {
-       return (I2C_FUNC_I2C |
+       return I2C_FUNC_I2C |
                I2C_FUNC_10BIT_ADDR |
                I2C_FUNC_SMBUS_EMUL |
-               I2C_FUNC_SMBUS_BLOCK_DATA);
+               I2C_FUNC_SMBUS_BLOCK_DATA;
 
 }
 
@@ -533,7 +531,7 @@ axxia_i2c_probe(struct platform_device *pdev)
        }
 
        idev->base         = base;
-       idev->regs         = (struct __iomem i2c_regs *) base;
+       idev->regs         = (struct __iomem i2c_regs*) base;
        idev->i2c_clk      = i2c_clk;
        idev->dev          = &pdev->dev;
        init_completion(&idev->msg_complete);
-- 
1.7.9.5

-- 
_______________________________________________
linux-yocto mailing list
linux-yocto@yoctoproject.org
https://lists.yoctoproject.org/listinfo/linux-yocto

Reply via email to