From: Chang Rebecca Swee Fun <rebecca.swee.fun.ch...@intel.com> Hi all,
This is the scenerio 1 that Boon Leong mentioned in the Feature Branch planning email thread. This will be the feature branch that consists of all patches that are queuing into 3.10 LTS/LTSI and also the so called "staging patches". Whenever the LTS/LTSI patches got merged into standard/base in future, that will break this feature branch. I will be rebase this feature branch to fix build breakage. This feature branch was implemented locally and built tested. Feature branch was able to merge with standard/base and built successfully. I have also run some sanity test to check the drivers condition. All tests are done on Bayley Bay CRB and Bakersport CRB. Valley Island Dev Kit was boot tested. If this is the scenerio that you are looking for, please help to create a new feature branch named: valleyisland-io-1.0 in linux-yocto-3.10. Thanks. Rebecca The following changes since commit 3e0a296fae952d8d93eb0f96566bf6d4a978c8ee: minnowboard-keys: Bind MinnowBoard buttons to arrow keys (2014-02-12 00:08:25 -0500) are available in the git repository at: git://git.yoctoproject.org/linux-yocto-contrib rebeccas/valleyisland-io-features-branch http://git.yoctoproject.org/cgit.cgi/linux-yocto-contrib/log/?h=rebeccas/valleyisland-io-features-branch Adrian Hunter (1): mmc: sdhci: Allow for irq being shared Alan Stern (1): usb: gadget: don't fail when DMA isn't present Chang Rebecca Swee Fun (1): x86/byt: enable board file for Baytrail LPSS PCI mode Chew, Chiau Ee (8): x86/Kconfig: add PCI dependency for CONFIG_X86_INTEL_LPSS serial: 8250_dw: Added support for 1M, 2M, 3M and 4M exat baud rate spi/pxa2xx-pci: Add support for Intel BYT SPI spi/pxa2xx: Fix BYT ACPI mode SPI DMA transfer failure at low speeds dma: dw: Add suspend and resume handling for PCI mode DW_DMAC. i2c: designware-pci: add 10-bit addressing mode functionality for BYT I2C i2c: designware-pci: set ideal HCNT, LCNT and SDA hold time value ACPI / LPSS: Add Intel BayTrail ACPI mode PWM Chew, Kean Ho (4): pinctrl-baytrail: add function mux checking in gpio pin request pinctrl-baytrail: unmap interrupt when free the gpio pin pinctrl-baytrail: enable platform device in the absent of ACPI enumeration pinctrl-baytrail: setup IOAPIC interrupt for GPIO clusters on non-ACPI system Chew, Kean ho (1): i2c: i801: enable Intel BayTrail SMBUS Felipe Balbi (1): usb: gadget: udc-core: move sysfs_notify() to a workqueue H Hartley Sweeten (1): pwm: Add sysfs interface Heikki Krogerus (2): serial: 8250: don't change the fifo trigger level when using dma serial: 8250_pci: add support for Intel BayTrail James Ralston (1): i2c: i801: Add Device IDs for Intel Wildcat Point-LP PCH Mika Westerberg (2): i2c: designware-pci: Add Baytrail PCI IDs pwm: add support for Intel Low Power Subsystem PWM Seth Heasley (1): i2c: i801: SMBus patch for Intel Coleto Creek DeviceIDs Documentation/ABI/testing/sysfs-class-pwm | 79 +++++++ Documentation/i2c/busses/i2c-i801 | 3 + Documentation/pwm.txt | 37 +++ arch/x86/Kconfig | 11 +- arch/x86/platform/Makefile | 3 + arch/x86/platform/byt/Makefile | 1 + arch/x86/platform/byt/byt-board.c | 84 +++++++ drivers/acpi/acpi_lpss.c | 11 + drivers/dma/dw/pci.c | 33 +++ drivers/i2c/busses/Kconfig | 3 + drivers/i2c/busses/i2c-designware-pcidrv.c | 66 +++++- drivers/i2c/busses/i2c-i801.c | 9 + drivers/mmc/host/sdhci.c | 4 +- drivers/pinctrl/Kconfig | 19 +- drivers/pinctrl/Makefile | 1 + drivers/pinctrl/pinctrl-baytrail-dev.c | 159 +++++++++++++ drivers/pinctrl/pinctrl-baytrail.c | 101 ++++++++- drivers/pwm/Kconfig | 14 ++ drivers/pwm/Makefile | 2 + drivers/pwm/core.c | 25 +- drivers/pwm/pwm-lpss.c | 183 +++++++++++++++ drivers/pwm/sysfs.c | 352 +++++++++++++++++++++++++++++ drivers/spi/Kconfig | 5 +- drivers/spi/spi-pxa2xx-dma.c | 2 +- drivers/spi/spi-pxa2xx-pci.c | 85 +++++-- drivers/tty/serial/8250/8250_core.c | 2 +- drivers/tty/serial/8250/8250_dw.c | 43 ++++ drivers/tty/serial/8250/8250_pci.c | 145 ++++++++++++ drivers/usb/gadget/udc-core.c | 18 +- include/linux/pinctrl/pinctrl-byt.h | 16 ++ include/linux/pwm.h | 29 ++- include/linux/usb/gadget.h | 4 + 32 files changed, 1506 insertions(+), 43 deletions(-) create mode 100644 Documentation/ABI/testing/sysfs-class-pwm create mode 100644 arch/x86/platform/byt/Makefile create mode 100644 arch/x86/platform/byt/byt-board.c create mode 100644 drivers/pinctrl/pinctrl-baytrail-dev.c create mode 100644 drivers/pwm/pwm-lpss.c create mode 100644 drivers/pwm/sysfs.c create mode 100644 include/linux/pinctrl/pinctrl-byt.h -- 1.9.1 -- _______________________________________________ linux-yocto mailing list linux-yocto@yoctoproject.org https://lists.yoctoproject.org/listinfo/linux-yocto