From: Chang Rebecca Swee Fun <rebecca.swee.fun.ch...@intel.com>

Hi Bruce and all,

This patchset is for rebasing the valleyisland-io-1.0 feature branch.
I recently received a notification from Greg that the Baytrail SMBUS
back-porting commits were successfully got merged into linux-stable
tree on branch linux-3.10.y. I foresee that you might as well merging
in the latest 3.10 LTS commits into linux-yocto-3.10.

What is the changes I've made in this patchset is, remove two commits
related to SMBUS. These two commits had been merge in to the 3.10 LTS.
8567f56 i2c: i801: enable Intel BayTrail SMBUS
1b796c0 i2c: i801: Add Device IDs for Intel Wildcat Point-LP PCH

For other patches in this feature branch, some are still staging in queue
to merge into 3.10 LTSI. If you have plan to merge in 3.10 LTS commits
into linux-yocto-3.10, please help to rebase valleyisland-io-1.0 feature
branch to this new branch.

After rebasing, valleyisland feature branch should have a new rev. branch
name called: valleyisland-io-2.0.

Thanks in advance.

Regards
Rebecca

The following changes since commit ca510b5192c3b3814f1d1a19403d8847ba5db12b:

  Merge tag 'v3.10.41' into standard/ltsi (2014-06-04 10:15:38 -0400)

are available in the git repository at:


  git://git.yoctoproject.org/linux-yocto-contrib rebeccas/feature-branch-rebase
  
http://git.yoctoproject.org/cgit.cgi/linux-yocto-contrib/log/?h=rebeccas/feature-branch-rebase

Adrian Hunter (1):
  mmc: sdhci: Allow for irq being shared

Alan Stern (1):
  usb: gadget: don't fail when DMA isn't present

Chang Rebecca Swee Fun (1):
  x86/byt: enable board file for Baytrail LPSS PCI mode

Chew, Chiau Ee (8):
  x86/Kconfig: add PCI dependency for CONFIG_X86_INTEL_LPSS
  serial: 8250_dw: Added support for 1M, 2M, 3M and 4M exat baud rate
  spi/pxa2xx-pci: Add support for Intel BYT SPI
  spi/pxa2xx: Fix BYT ACPI mode SPI DMA transfer failure at low speeds
  dma: dw: Add suspend and resume handling for PCI mode DW_DMAC.
  i2c: designware-pci: add 10-bit addressing mode functionality for BYT
    I2C
  i2c: designware-pci: set ideal HCNT, LCNT and SDA hold time value
  ACPI / LPSS: Add Intel BayTrail ACPI mode PWM

Chew, Kean Ho (4):
  pinctrl-baytrail: add function mux checking in gpio pin request
  pinctrl-baytrail: unmap interrupt when free the gpio pin
  pinctrl-baytrail: enable platform device in the absent of ACPI
    enumeration
  pinctrl-baytrail: setup IOAPIC interrupt for GPIO clusters on non-ACPI
    system

Felipe Balbi (1):
  usb: gadget: udc-core: move sysfs_notify() to a workqueue

H Hartley Sweeten (1):
  pwm: Add sysfs interface

Heikki Krogerus (2):
  serial: 8250: don't change the fifo trigger level when using dma
  serial: 8250_pci: add support for Intel BayTrail

Mika Westerberg (2):
  i2c: designware-pci: Add Baytrail PCI IDs
  pwm: add support for Intel Low Power Subsystem PWM

 Documentation/ABI/testing/sysfs-class-pwm  |  79 +++++++
 Documentation/pwm.txt                      |  37 +++
 arch/x86/Kconfig                           |  11 +-
 arch/x86/platform/Makefile                 |   3 +
 arch/x86/platform/byt/Makefile             |   1 +
 arch/x86/platform/byt/byt-board.c          |  84 +++++++
 drivers/acpi/acpi_lpss.c                   |  11 +
 drivers/dma/dw/pci.c                       |  33 +++
 drivers/i2c/busses/i2c-designware-pcidrv.c |  66 +++++-
 drivers/mmc/host/sdhci.c                   |   4 +-
 drivers/pinctrl/Kconfig                    |  19 +-
 drivers/pinctrl/Makefile                   |   1 +
 drivers/pinctrl/pinctrl-baytrail-dev.c     | 159 +++++++++++++
 drivers/pinctrl/pinctrl-baytrail.c         | 101 ++++++++-
 drivers/pwm/Kconfig                        |  14 ++
 drivers/pwm/Makefile                       |   2 +
 drivers/pwm/core.c                         |  25 +-
 drivers/pwm/pwm-lpss.c                     | 183 +++++++++++++++
 drivers/pwm/sysfs.c                        | 352 +++++++++++++++++++++++++++++
 drivers/spi/Kconfig                        |   5 +-
 drivers/spi/spi-pxa2xx-dma.c               |   2 +-
 drivers/spi/spi-pxa2xx-pci.c               |  85 +++++--
 drivers/tty/serial/8250/8250_core.c        |   2 +-
 drivers/tty/serial/8250/8250_dw.c          |  43 ++++
 drivers/tty/serial/8250/8250_pci.c         | 145 ++++++++++++
 drivers/usb/gadget/udc-core.c              |  18 +-
 include/linux/pinctrl/pinctrl-byt.h        |  16 ++
 include/linux/pwm.h                        |  29 ++-
 include/linux/usb/gadget.h                 |   4 +
 29 files changed, 1491 insertions(+), 43 deletions(-)
 create mode 100644 Documentation/ABI/testing/sysfs-class-pwm
 create mode 100644 arch/x86/platform/byt/Makefile
 create mode 100644 arch/x86/platform/byt/byt-board.c
 create mode 100644 drivers/pinctrl/pinctrl-baytrail-dev.c
 create mode 100644 drivers/pwm/pwm-lpss.c
 create mode 100644 drivers/pwm/sysfs.c
 create mode 100644 include/linux/pinctrl/pinctrl-byt.h

-- 
1.9.1

-- 
_______________________________________________
linux-yocto mailing list
linux-yocto@yoctoproject.org
https://lists.yoctoproject.org/listinfo/linux-yocto

Reply via email to