> -----Original Message----- > From: linux-yocto-boun...@yoctoproject.org [mailto:linux-yocto- > boun...@yoctoproject.org] On Behalf Of > rebecca.swee.fun.ch...@intel.com > Sent: Thursday, August 28, 2014 3:52 AM > To: linux-yocto@yoctoproject.org > Subject: [linux-yocto] [PATCH 00/28][3.10] Baytrail LPSS I/O feature backport > > From: Chang Rebecca Swee Fun <rebecca.swee.fun.ch...@intel.com> > > Hi all, > > Here is a series of patches that I've cherry-picked from mainline kernel into > linux-yocto-3.10. These patches are Baytrail PCI mode LPSS I/O features. > The patches consists of PWM, DMA, UART, USB device mode, I2C, and SPI > device drivers. > > These patches was in valleyisland-io-1.0 currently. I will then rebase the > valleyisland-io feature branch to reduce the maintenance effort in feature > branch.
Hi Rebecca, Will the older commit keep working after your rebase? If not, then you may want to create a new feature branch. Nitin > > To help you in review process, one of the patch is actually pending to > mainline and it is now queuing in linux-next git repo. > The patch that I mentioned is: > e4f08d7 spi/pxa2xx-pci: Add common clock framework support in PCI glue > layer while the other patches are confirmed picked from mainline. > > This series of patches had been built and tested on Bakersports, and > MinnowBoard MAX. > > Please review the series of patches and merge them into linux-yocto-3.10 > standard/base branch for feature enabling purposes. > > Thanks in advance > > Rebecca > > The following changes since commit > aa677a2d02677ec92d59a8c36d001cf2f5cf3260: > > usb/core: fix merge issue (2014-06-16 12:24:47 -0400) > > are available in the git repository at: > > git://git.yoctoproject.org/linux-yocto-contrib rebeccas/baytrail-backport- > features > http://git.yoctoproject.org/cgit.cgi/linux-yocto- > contrib/log/?h=rebeccas/baytrail-backport-features > > Adrian Hunter (1): > mmc: sdhci: Allow for irq being shared > > Alan Cox (1): > pwm: lpss: Add support for PCI devices > > Alan Stern (1): > usb: gadget: don't fail when DMA isn't present > > Andy Shevchenko (2): > dmaengine: dw: introduce dwc_dostart_first_queued() helper > dmaengine: dw: don't perform DMA when dmaengine_submit is called > > Antonio Ospite (1): > spi/pxa2xx: fix runtime PM enabling order > > Chew, Chiau Ee (8): > ACPI / LPSS: Add Intel BayTrail ACPI mode PWM > dma: dw: Add suspend and resume handling for PCI mode DW_DMAC. > i2c: designware-pci: add 10-bit addressing mode functionality for BYT > I2C > i2c: designware-pci: set ideal HCNT, LCNT and SDA hold time value > spi/pxa2xx-pci: Add PCI mode support for BayTrail LPSS SPI > spi/pxa2xx: change default supported DMA burst size to 1 > spi/pxa2xx: fix incorrect SW mode chipselect setting for BayTrail LPSS > SPI > spi/pxa2xx-pci: Add common clock framework support in PCI glue layer > > Felipe Balbi (1): > usb: gadget: udc-core: move sysfs_notify() to a workqueue > > H Hartley Sweeten (1): > pwm: Add sysfs interface > > Heikki Krogerus (3): > serial: 8250_dma: check the result of TX buffer mapping > serial: 8250: don't change the fifo trigger level when using dma > serial: 8250_pci: add support for Intel BayTrail > > Jingoo Han (2): > spi: remove DEFINE_PCI_DEVICE_TABLE macro > spi: pxa2xx: remove unnecessary OOM messages > > Loic Poulain (1): > 8250_dw: Support all baudrates on baytrail > > Maurice Petallo (2): > mmc: sdhci: Preset value not supported in Baytrail eMMC > mmc: sdhci: add DDR50 1.8V mode support for BayTrail eMMC Controller > > Mika Westerberg (3): > pwm: add support for Intel Low Power Subsystem PWM > i2c: designware-pci: Add Baytrail PCI IDs > spi/pxa2xx: Prevent DMA from transferring too many bytes > > Thierry Reding (1): > pwm: lpss: Fix const qualifier and sparse warnings > > Documentation/ABI/testing/sysfs-class-pwm | 79 +++++++ > Documentation/pwm.txt | 37 +++ > drivers/acpi/acpi_lpss.c | 11 + > drivers/dma/TODO | 1 - > drivers/dma/dw/core.c | 38 ++-- > drivers/dma/dw/pci.c | 33 +++ > drivers/i2c/busses/i2c-designware-pcidrv.c | 66 +++++- > drivers/mmc/host/sdhci-acpi.c | 4 +- > drivers/mmc/host/sdhci-pci.c | 3 +- > drivers/mmc/host/sdhci.c | 4 +- > drivers/pwm/Kconfig | 14 ++ > drivers/pwm/Makefile | 2 + > drivers/pwm/core.c | 25 +- > drivers/pwm/pwm-lpss.c | 282 +++++++++++++++++++++++ > drivers/pwm/sysfs.c | 352 > +++++++++++++++++++++++++++++ > drivers/spi/Kconfig | 2 +- > drivers/spi/spi-dw-pci.c | 2 +- > drivers/spi/spi-pxa2xx-dma.c | 18 +- > drivers/spi/spi-pxa2xx-pci.c | 97 ++++++-- > drivers/spi/spi-pxa2xx.c | 28 ++- > drivers/spi/spi-topcliff-pch.c | 2 +- > drivers/tty/serial/8250/8250_core.c | 2 +- > drivers/tty/serial/8250/8250_dma.c | 17 +- > drivers/tty/serial/8250/8250_dw.c | 81 ++++++- > drivers/tty/serial/8250/8250_pci.c | 145 ++++++++++++ > drivers/usb/gadget/udc-core.c | 18 +- > include/linux/pwm.h | 29 ++- > include/linux/usb/gadget.h | 4 + > 28 files changed, 1297 insertions(+), 99 deletions(-) create mode 100644 > Documentation/ABI/testing/sysfs-class-pwm > create mode 100644 drivers/pwm/pwm-lpss.c create mode 100644 > drivers/pwm/sysfs.c > > -- > 1.9.1 > > -- > _______________________________________________ > linux-yocto mailing list > linux-yocto@yoctoproject.org > https://lists.yoctoproject.org/listinfo/linux-yocto -- _______________________________________________ linux-yocto mailing list linux-yocto@yoctoproject.org https://lists.yoctoproject.org/listinfo/linux-yocto