On Mon, Aug 10, 2015 at 1:53 PM, Cristian Bercaru <cristian.berc...@windriver.com> wrote: > Hello! This is a kind reminder to merge my patches.
I'm on vacation .. so no pull requests are likely to be processed until next week. If they are, it is because I've managed to get more than 10 minutes in front of a screen. This is a kind reminder to be patient ;) Cheers, Bruce > Thanks, > Cristian > > > On 08/06/2015 08:58 PM, Cristian Bercaru wrote: >> >> Hello! >> >> The standard/preempt-rt/axxia/base branch in linux-yocto-3.4 >> has not been updated for a very long time. This series of patches >> syncs it with standard/axxia/base. >> >> Please pull the patches from >> https://github.com/lsigithub/lsi_axxia_yocto_pull.git >> branch standard/preempt-rt/axxia/base_sync >> and apply them in linux-yocto-3.4, on standard/preempt-rt/axxia/base. >> >> Thank you, >> Cristian Bercaru >> >> Anders Berg (32): >> drivers/dma: Corrected IRQ line mixup. >> arm/dts: Added device tree nodes for I2C controllers. >> drivers/i2c: New I2C bus driver >> drivers/i2c: Corrected WAIT_TIMER timeout calculation. >> drivers/i2c: Use 'bus' property from device tree. >> usb: Enable dma transfers in ehci-ci13612 >> usb: Cleanup USB host controller driver ehci-ci13612 >> arm/mach-axxia: Added L3 cache init function >> usb: ehci-ci13612: Halt controller before reset >> axxia: Fixed earlyprintk >> axxia: Define arch_is_coherent() >> ARM: 7465/1: Handle >4GB memory sizes in device tree and >> mem=size@start option >> ARM: LPAE: use phys_addr_t in alloc_init_pud() >> ARM: 7499/1: mm: Fix vmalloc overlap check for !HIGHMEM >> arm: mmu: Fixed checkpatch issues with mmu >> drivers/i2c-axxia: Support I2C_M_RECV_LEN >> i2c-axxia: Adjust tLOW,tHIGH to match fast-mode requirements >> i2c-axxia: Avoid timeout when interrupt delayed >> i2c-axxia: Fixed i2c device minor numbers >> i2c: axxia: Add support for 10-bit addressing >> net: lsi_acp_net: Added new string to DT match >> ARM: dts: axxia: Corrected IRQ for memory contollers >> ARM: axxia: Support MSI on both PCIe controllers >> i2c: axxia: Minor cleanup (cosmetic) >> i2c: axxia: Report spurious IRQ >> i2c: axxia: Fix broken smbus block read >> i2c: axxia: Fall back to polling mode when no IRQ >> ARM: axxia: Fix .init section mismatch >> spi: pl022: Fix .init section mismatch >> gpio: pl061: Fix .init section mismatch >> misc: lsi-smmon: Bug when probing with IRQ pending >> misc: lsi-smmon: Add parameter panic_on_fatal >> >> Bruce Ashfield (3): >> Revert "arch/powerpc/kernel: Address IBM PPC476 TLB parity error" >> Revert "arch/powerpc/kernel: Address IBM PPC476 erratum 48" >> Revert "arch/powerpc/kernel: Address IBM PPC476 erratum 47" >> >> Cristian Bercaru (4): >> arch/powerpc/kernel: Address IBM PPC476 erratum 47 >> arch/powerpc/kernel: Address IBM PPC476 erratum 48 >> arch/powerpc/kernel: Address IBM PPC476 TLB parity error >> rapidio: axxia: fix array initialization >> >> David Mercado (15): >> LSI axm55xx: Add CPU Hotplug support >> arch/powerpc: Fix PMU interrupts >> arm/mach-axxia: Fix irq_set_type() in arch/arm/mach-axxia/axxia-gic.c >> drivers/net/ethernet: add ACP wrapper support for LSI RTE into kernel >> arm/mach-axxia: fix error with IRQ type setting at startup >> drivers/net/ethernet: combined arm and powerpc FEMAC ethernet driver >> arm/mach-axxia: filled in stub axxia_restart function >> drivers: Fix Device Tree "compatible" fields >> LSI ACP34XX: Update new Axxia GIC Driver >> LSI AXM55xx: Enable multi-cluster wfe/sev >> LSI AXM55XX: Add PMU support >> LSI FEMAC Ethernet: Updated for upstream submittal >> kernel/irq/manage.c: Fix irq_set_affinity to allow use with buslocks >> LSI AXM55xx: Axxia GIC driver improvements (3rd gen) >> LSI AXM55xx: Fix PMU handler issue >> >> Gary McGee (2): >> arm/mach-axxia: support for Axxia DDR retention >> LSI AXM55xx arm/axxia: improved robustness for DDR retention >> >> Jay Jayatheerthan (1): >> drivers/net/ethernet: Fix clause 45 MDIO access. >> >> John Jacques (57): >> arm/boot/dts: Change the timer interrupt numbers to match the new >> simulator. >> arch/powerpc: Release the lock when ncr_read() completes. >> arch/powerpc: Aded wrappers for platform device >> registration/deregistration. >> powerpc/dts: Device tree files for the LSI boards. >> arm: AXM5516 emulation bringup boot >> arm: AXM5516 emulation bringup mach-axxia >> drivers/tty: AXM5516 emulation bringup - amba-pl011.c >> drivers/net: AXM5516 emulation bringup - lsi_acp_mdio.c >> drivers/net: AXM5516 emulation bringup - lsi_acp_net.c >> drivers/net: AXM5516 emulation bringup - Makefile >> drivers/net/ethernet: Wrapper Cleanup >> drivers/tty: Handle baud rate changes. The initial port only ran at >> 115200. >> arm/boot/dts: The device tree for AXM5516 emulation. >> arm/boot/dts: The device tree for Amarillo. >> drivers/tty: Hard code the baud rate divisors for now. >> arm/mach-axxia: Remove debug printk(). >> drivers/tty: Handle the baud rate correctly, and use the PLLs >> provided by U-Boot to set up the clocks. >> arm/boot/dts: Reserve memory from 0 to 4M (for U-Boot). >> arm/mach-axxia: Wait a bit more gently when in the pen. >> arm/mach-axxia: Clean up the sequence of starting other cores. >> arm/boot/dts: Added phy-link, and changed the default phy address to >> 0x1e. >> arm/include: A clean up of the femac code. >> drivers/net: The work around for Amarillo needs to be done the first >> time as well! >> drivers/net/ethernet: Use ntohl() instead of #defines and swab32(). >> drivers/spi: Don't check for the, no longer used, enabled property. >> arch/arm/mach-axxia: add support for SPI flash >> arm-powerpc-drivers: Add the necessary wrappers to all architectures. >> arm/mach-axxia: PCIe support. >> arm-powerpc-drivers: Rearrange the location of the wrapper functions >> drivers/net/ethernet: Remove the Amarillo networking work-around by >> default. >> arch: LSI Axxia systems use a config ring to access parts of the >> hardware. >> drivers/misc: System memory monitoring for AXM55xx. >> drivers/misc: Add a parameter to the smmon module, log. >> drivers/misc: lsi-smmon - Mask unmonitored bits in the interrupt mask >> register >> arm/mach-axxia: L3 Cache is not available in simulation! >> arm/mach-axxia: Add dummy versions of the mdio access functions >> drivers/ethernet: Set the watermark correctly in emulation >> powerpc/dts: adds support for acp35xx emulation >> arm/mach-axxia: The offset was not being passed to __arm_ioremap_pfn! >> arch/arm/mach-axxi: Updated DDR Retention to Wokr from Interrupt >> Context >> arch/arm/mach-axxia: Clear MTC Errors During Initialization >> LSI: Fix Device Tree "compatible" fields >> powerpc/mpic: Disable preemption when calling mpic_processor_id() >> arm/mach-axxia: Same build for HW and simlation and DDR Retention >> Reset and clock init. >> axxia: Remove Wrapper Functions >> axxia: Device tree and Target Name/Machine Type Update >> axxia: Fix a Size Warning in the SRIO Section of the Device Trees >> arch/powerpc: Updated the UART Driver to Support 3500 >> arch/powerpc: Don't Try to Use NAND on Axxia 3500 >> axxia: Fixed typo in acpxxxx.dts file >> arch/powerpc: Updated Device Trees for Axxia (3400/3500) >> arch/powerpc: Update the Axxia NAND Driver to support 3500 >> arch/powerpc: Reset Updates for Axxia >> arch/powerpc: Updated Device Trees for Axxia Targets >> axxia-nand: Use the right Machine Types in the Axxia NAND Driver >> arch/powerpc: Fix Up the MDIO Offset and Period on Axxia >> arch/powerpc: Add a Work Around for Axxia 3500 Resets >> >> Michael Bringmann (14): >> LSI AXM55XX/rapidio: Stability and bug fix improvements , Correct >> boundary, Expand valid condition. >> LSI AXM55xx: Validate SRIO link ready status during driver >> initialization. >> LSI AXM55xx: Some code optimizations for AXXIA rapidio mport driver. >> LSI AXM55xx: Fixes for mailbox open bounds checks. >> LSI AXM55xx: Improve concurrency protection in AXXIA rapidio calls. >> LSI AXM55xx: Fix concurrency issue for variable >> LSI AXM55xx rapidio: Change the timers for inbound messages >> LSI AXM55xx rapidio: Speed up bottleneck in inbox. >> LSI AXM55x rapidio: removed __devinit from init routines >> LSI AXM55xx/rapidio: Fix NULL pointer reference in >> rio_release_inb_mbox. >> LSI AXM55xx: Various bug fixes for rapidio endpoint controller. >> LSI AXM55xx: Configuration updates and bug fixes for rapidio. >> LSI AXM55xx: Disable linkdown reset configuration. >> LSI AXM55xx: Move datastream APIs and symbols to public header file. >> >> Niraj Desai (1): >> drivers/usb: LSI AXM5500 USB driver support >> >> Paul Butler (14): >> powerpc/configs: remove elpaso defconfig >> Support for the new BCM 5221 phy - acp_mdio >> drivers/misc: adding MTC to dts >> drivers/net: adding ifdef for Amarillo, without the auto-negotiate >> ecn. >> arm/dts: whitespace cleanup axm55xx.dts >> drivers/i2c: removes obsolete driver >> drivers/rapidio/devices: Initial Submittal of LSI rapidio >> drivers/rapidio: new files >> drivers/rapidio: modified files >> arm: rapidio updates >> powerpc: rapidio updates >> include: rapidio updates >> drivers: rapidio updates >> arm/mach-axxia: Updated PCIe driver to set PCIe >> >> Sangeetha Rao (4): >> arch/powerpc/kernel: Address IBM PPC476 erratum 47 >> arch/powerpc/kernel: Address IBM PPC476 erratum 48 >> arch/powerpc/kernel: Address IBM PPC476 TLB parity error >> arch/powerpc/kernel: Address IBM PPC476 erratum 48 (update) >> >> SangeethaRao (15): >> arm/mach-axxia: Updated such that GFP_DMA mask is correctly set to 32 >> bits for AXM55xx >> drivers/usb: USB driver changes for AXM55xx >> arm/mach-axxia: Updated PCIe driver since it had incorrect PEI log >> info >> arm/mach-axxia: Fixed type1 PCIe enumeration issue >> drivers/usb: USB driver changes to improve performance on AXM55xx. >> drivers/net: FEMAC hprot register wasn't being set to uncached mode >> usb: Added check to confirm that USB controller is stopped before >> trying to reset it >> arch/powerpc/sysdev: Fixed PCIe enumeration issue on AXM3500 >> emulation >> drivers/usb: USB driver/dts on PPC was broken. >> arch/arm/mach-axxia: added support for ncr_read/ncr_write >> LSI sysdev/pci: Removing the power of 2 size restriction >> LSI AXM55xx i2c: Adding support for AXM3500 I2C driver >> powerpc/sysdev/lsi:adding 3500 PCIe inbound mapping support >> arch/arm/mach-axxia: Calculate delay calibration once >> arch/powerpc/sysdev: Added PCIe MSI support for AXM35xx >> >> Sreedevi Joshi (1): >> char: hwrng: AXXIA HW Random Number Generator support >> >> ningligong (3): >> drivers/rapidio/lsi: squash a bunch rapidio stuff together and >> Cleanup >> LSI AXM55xx rapidio? Fixed offset of RAB_OBDSE_XX registers >> LSI AXM55xx: Fixed inbound data streaming ISR handling >> >> wwang22 (1): >> drivers/misc: Disabled debug message in MTC driver >> >> arch/arm/Kconfig | 20 + >> arch/arm/Kconfig.debug | 9 + >> arch/arm/Makefile | 1 + >> arch/arm/boot/compressed/head.S | 63 +- >> arch/arm/boot/dts/axm-sim.dts | 403 --- >> arch/arm/boot/dts/axm55xx.dts | 439 +++- >> arch/arm/boot/dts/axm55xxemu.dts | 196 ++ >> arch/arm/boot/dts/axm55xxemu7.dts | 217 ++ >> arch/arm/boot/dts/axm55xxsim.dts | 126 +- >> arch/arm/boot/dts/axm55xxsim16.dts | 431 +++ >> arch/arm/boot/emuboot/Makefile | 10 +- >> arch/arm/boot/emuboot/emuboot.S | 27 +- >> arch/arm/boot/emuboot/emuboot.lds | 4 +- >> arch/arm/include/asm/axxia-rio.h | 138 + >> arch/arm/include/asm/lsi/acp_ncr.h | 3 + >> arch/arm/include/asm/rio.h | 37 + >> arch/arm/include/asm/setup.h | 14 +- >> arch/arm/include/asm/spinlock.h | 4 + >> arch/arm/kernel/head.S | 8 + >> arch/arm/kernel/perf_event_v7.c | 3 +- >> arch/arm/kernel/setup.c | 70 +- >> arch/arm/mach-axxia/Makefile | 5 +- >> arch/arm/mach-axxia/axxia-gic.c | 1501 ++++++----- >> arch/arm/mach-axxia/axxia.c | 176 +- >> arch/arm/mach-axxia/axxia.h | 2 +- >> arch/arm/mach-axxia/clock.c | 116 +- >> arch/arm/mach-axxia/ddr_retention.c | 356 +++ >> arch/arm/mach-axxia/ddr_shutdown.c | 332 +++ >> arch/arm/mach-axxia/headsmp.S | 30 +- >> arch/arm/mach-axxia/hotplug.c | 52 +- >> arch/arm/mach-axxia/include/mach/debug-macro.S | 28 +- >> arch/arm/mach-axxia/include/mach/hardware.h | 25 +- >> arch/arm/mach-axxia/include/mach/irqs.h | 1 + >> arch/arm/mach-axxia/include/mach/memory.h | 19 + >> arch/arm/mach-axxia/include/mach/ncr.h | 44 + >> arch/arm/mach-axxia/io.c | 2 +- >> arch/arm/mach-axxia/ncr.c | 597 +++++ >> arch/arm/mach-axxia/pci.c | 88 +- >> arch/arm/mach-axxia/platsmp.c | 92 +- >> arch/arm/mach-axxia/rapidio.c | 79 + >> arch/arm/mm/mmu.c | 82 +- >> arch/powerpc/boot/dts/ACP344xV2.dts | 20 +- >> arch/powerpc/boot/dts/acp25xx.dts | 304 +++ >> arch/powerpc/boot/dts/acp342x.dts | 319 +++ >> arch/powerpc/boot/dts/acp344x.dts | 363 +++ >> arch/powerpc/boot/dts/acp35xx.dts | 490 ++++ >> arch/powerpc/configs/elpaso_defconfig | 2138 >> --------------- >> arch/powerpc/include/asm/axxia-rio.h | 110 + >> arch/powerpc/include/asm/lsi/acp_ncr.h | 42 - >> arch/powerpc/include/asm/rio.h | 46 + >> arch/powerpc/kernel/head_44x.S | 44 +- >> arch/powerpc/kernel/traps.c | 240 +- >> arch/powerpc/perf/core-lsi-acp.c | 115 +- >> arch/powerpc/perf/ppc476-pmu.c | 59 - >> arch/powerpc/platforms/44x/Makefile | 3 +- >> arch/powerpc/platforms/44x/acprio.c | 65 + >> arch/powerpc/platforms/44x/acpx1.c | 113 +- >> arch/powerpc/sysdev/Kconfig | 13 +- >> arch/powerpc/sysdev/Makefile | 9 +- >> arch/powerpc/sysdev/lsi_acp_ncr.c | 375 --- >> arch/powerpc/sysdev/lsi_msi.c | 389 +++ >> arch/powerpc/sysdev/lsi_msi.h | 21 + >> arch/powerpc/sysdev/lsi_pci.c | 129 +- >> arch/powerpc/sysdev/mpic.c | 119 +- >> arch/powerpc/sysdev/ppc4xx_soc.c | 5 +- >> drivers/char/hw_random/Kconfig | 10 + >> drivers/char/hw_random/Makefile | 1 + >> drivers/char/hw_random/axxia-rng.c | 548 ++++ >> drivers/dma/lsi-dma32.c | 25 +- >> drivers/dma/lsi-dma32.h | 5 + >> drivers/gpio/gpio-pl061.c | 2 +- >> drivers/i2c/busses/Makefile | 2 +- >> drivers/i2c/busses/ai2c/Makefile | 17 - >> drivers/i2c/busses/ai2c/ai2c_bus.h | 231 -- >> drivers/i2c/busses/ai2c/ai2c_bus_axm5500.c | 642 ----- >> drivers/i2c/busses/ai2c/ai2c_dev.h | 228 -- >> drivers/i2c/busses/ai2c/ai2c_dev_clock.c | 493 ---- >> drivers/i2c/busses/ai2c/ai2c_dev_clock_ext.h | 41 - >> drivers/i2c/busses/ai2c/ai2c_mod.c | 354 --- >> drivers/i2c/busses/ai2c/ai2c_plat.c | 758 ------ >> drivers/i2c/busses/ai2c/ai2c_plat.h | 336 --- >> drivers/i2c/busses/ai2c/ai2c_sal.c | 109 - >> drivers/i2c/busses/ai2c/ai2c_sal.h | 393 --- >> drivers/i2c/busses/ai2c/ai2c_types.h | 118 - >> drivers/i2c/busses/ai2c/regs/ai2c_axi_timer_regs.h | 202 -- >> .../busses/ai2c/regs/ai2c_cfg_node_reg_defines.h | 39 - >> drivers/i2c/busses/ai2c/regs/ai2c_cfg_node_regs.h | 146 -- >> drivers/i2c/busses/ai2c/regs/ai2c_i2c_regs.h | 1797 ------------- >> drivers/i2c/busses/ai2c/regs/ai2c_regions.h | 81 - >> drivers/i2c/busses/i2c-axxia.c | 696 +++++ >> drivers/misc/Kconfig | 12 + >> drivers/misc/Makefile | 2 + >> drivers/misc/lsi-mtc.c | 1371 +++++----- >> drivers/misc/lsi-ncr.c | 487 ++++ >> drivers/misc/lsi-ncr.h | 42 + >> drivers/misc/lsi-smmon.c | 287 ++ >> drivers/mtd/nand/lsi_acp_nand.c | 158 +- >> drivers/net/ethernet/lsi/Kconfig | 15 - >> drivers/net/ethernet/lsi/Makefile | 1 + >> drivers/net/ethernet/lsi/lsi_acp_mdio.c | 349 +++ >> drivers/net/ethernet/lsi/lsi_acp_net.c | 1061 ++++---- >> drivers/net/ethernet/lsi/lsi_acp_net.h | 327 ++- >> drivers/net/rionet.c | 129 +- >> drivers/rapidio/Kconfig | 85 + >> drivers/rapidio/Makefile | 4 +- >> drivers/rapidio/devices/Kconfig | 2 + >> drivers/rapidio/devices/Makefile | 2 + >> drivers/rapidio/devices/lsi/DtsConfig.txt | 114 + >> drivers/rapidio/devices/lsi/Kconfig | 55 + >> drivers/rapidio/devices/lsi/Makefile | 8 + >> drivers/rapidio/devices/lsi/SysfsDesc.txt | 294 +++ >> drivers/rapidio/devices/lsi/axxia-rio-ds.c | 1883 +++++++++++++ >> drivers/rapidio/devices/lsi/axxia-rio-ds.h | 114 + >> drivers/rapidio/devices/lsi/axxia-rio-hotplug.c | 375 +++ >> drivers/rapidio/devices/lsi/axxia-rio-irg-dbg.h | 258 ++ >> drivers/rapidio/devices/lsi/axxia-rio-irq.c | 2768 >> ++++++++++++++++++++ >> drivers/rapidio/devices/lsi/axxia-rio-irq.h | 333 +++ >> drivers/rapidio/devices/lsi/axxia-rio-sysfs.c | 962 +++++++ >> drivers/rapidio/devices/lsi/axxia-rio.c | 1775 +++++++++++++ >> drivers/rapidio/devices/lsi/axxia-rio.h | 576 ++++ >> drivers/rapidio/rio-access.c | 89 +- >> drivers/rapidio/rio-destid.c | 1550 +++++++++++ >> drivers/rapidio/rio-destid.h | 85 + >> drivers/rapidio/rio-dio.c | 872 ++++++ >> drivers/rapidio/rio-driver.c | 70 +- >> drivers/rapidio/rio-hotplug.c | 138 + >> drivers/rapidio/rio-hotplug.h | 34 + >> drivers/rapidio/rio-job.h | 31 + >> drivers/rapidio/rio-locks.c | 719 +++++ >> drivers/rapidio/rio-locks.h | 69 + >> drivers/rapidio/rio-multicast.h | 28 + >> drivers/rapidio/rio-net.h | 26 + >> drivers/rapidio/rio-net2.c | 2037 ++++++++++++++ >> drivers/rapidio/rio-quirks.c | 59 + >> drivers/rapidio/rio-route.c | 290 ++ >> drivers/rapidio/rio-route.h | 31 + >> drivers/rapidio/rio-sysfs.c | 218 +- >> drivers/rapidio/rio.c | 1419 +++++++--- >> drivers/rapidio/rio.h | 87 +- >> drivers/spi/spi-pl022.c | 46 +- >> drivers/tty/serial/amba-pl011.c | 36 +- >> drivers/tty/serial/lsi_acp_serial.c | 96 +- >> drivers/usb/host/Kconfig | 8 +- >> drivers/usb/host/ehci-ci13612.c | 175 +- >> drivers/usb/host/ehci-ci13612.h | 2 +- >> include/asm-generic/vmlinux.lds.h | 10 + >> include/linux/rio-axxia.h | 322 +++ >> include/linux/rio.h | 231 +- >> include/linux/rio_dio.h | 67 + >> include/linux/rio_drv.h | 202 +- >> include/linux/rio_ids.h | 7 + >> include/linux/rio_regs.h | 26 + >> include/linux/riopw.h | 30 + >> kernel/irq/manage.c | 6 +- >> scripts/setlocalversion | 8 + >> 155 files changed, 29239 insertions(+), 12389 deletions(-) >> delete mode 100644 arch/arm/boot/dts/axm-sim.dts >> create mode 100644 arch/arm/boot/dts/axm55xxemu.dts >> create mode 100644 arch/arm/boot/dts/axm55xxemu7.dts >> create mode 100644 arch/arm/boot/dts/axm55xxsim16.dts >> create mode 100644 arch/arm/include/asm/axxia-rio.h >> create mode 100644 arch/arm/include/asm/rio.h >> create mode 100644 arch/arm/mach-axxia/ddr_retention.c >> create mode 100644 arch/arm/mach-axxia/ddr_shutdown.c >> create mode 100644 arch/arm/mach-axxia/include/mach/memory.h >> create mode 100644 arch/arm/mach-axxia/include/mach/ncr.h >> create mode 100644 arch/arm/mach-axxia/ncr.c >> create mode 100644 arch/arm/mach-axxia/rapidio.c >> create mode 100644 arch/powerpc/boot/dts/acp25xx.dts >> create mode 100644 arch/powerpc/boot/dts/acp342x.dts >> create mode 100644 arch/powerpc/boot/dts/acp344x.dts >> create mode 100644 arch/powerpc/boot/dts/acp35xx.dts >> delete mode 100755 arch/powerpc/configs/elpaso_defconfig >> create mode 100644 arch/powerpc/include/asm/axxia-rio.h >> delete mode 100644 arch/powerpc/include/asm/lsi/acp_ncr.h >> create mode 100644 arch/powerpc/platforms/44x/acprio.c >> delete mode 100644 arch/powerpc/sysdev/lsi_acp_ncr.c >> create mode 100644 arch/powerpc/sysdev/lsi_msi.c >> create mode 100644 arch/powerpc/sysdev/lsi_msi.h >> create mode 100644 drivers/char/hw_random/axxia-rng.c >> delete mode 100644 drivers/i2c/busses/ai2c/Makefile >> delete mode 100644 drivers/i2c/busses/ai2c/ai2c_bus.h >> delete mode 100644 drivers/i2c/busses/ai2c/ai2c_bus_axm5500.c >> delete mode 100644 drivers/i2c/busses/ai2c/ai2c_dev.h >> delete mode 100644 drivers/i2c/busses/ai2c/ai2c_dev_clock.c >> delete mode 100644 drivers/i2c/busses/ai2c/ai2c_dev_clock_ext.h >> delete mode 100644 drivers/i2c/busses/ai2c/ai2c_mod.c >> delete mode 100644 drivers/i2c/busses/ai2c/ai2c_plat.c >> delete mode 100644 drivers/i2c/busses/ai2c/ai2c_plat.h >> delete mode 100644 drivers/i2c/busses/ai2c/ai2c_sal.c >> delete mode 100644 drivers/i2c/busses/ai2c/ai2c_sal.h >> delete mode 100644 drivers/i2c/busses/ai2c/ai2c_types.h >> delete mode 100644 drivers/i2c/busses/ai2c/regs/ai2c_axi_timer_regs.h >> delete mode 100644 >> drivers/i2c/busses/ai2c/regs/ai2c_cfg_node_reg_defines.h >> delete mode 100644 drivers/i2c/busses/ai2c/regs/ai2c_cfg_node_regs.h >> delete mode 100644 drivers/i2c/busses/ai2c/regs/ai2c_i2c_regs.h >> delete mode 100644 drivers/i2c/busses/ai2c/regs/ai2c_regions.h >> create mode 100644 drivers/i2c/busses/i2c-axxia.c >> create mode 100644 drivers/misc/lsi-ncr.c >> create mode 100644 drivers/misc/lsi-ncr.h >> create mode 100644 drivers/misc/lsi-smmon.c >> create mode 100644 drivers/net/ethernet/lsi/lsi_acp_mdio.c >> create mode 100644 drivers/rapidio/devices/lsi/DtsConfig.txt >> create mode 100644 drivers/rapidio/devices/lsi/Kconfig >> create mode 100644 drivers/rapidio/devices/lsi/Makefile >> create mode 100644 drivers/rapidio/devices/lsi/SysfsDesc.txt >> create mode 100755 drivers/rapidio/devices/lsi/axxia-rio-ds.c >> create mode 100755 drivers/rapidio/devices/lsi/axxia-rio-ds.h >> create mode 100644 drivers/rapidio/devices/lsi/axxia-rio-hotplug.c >> create mode 100644 drivers/rapidio/devices/lsi/axxia-rio-irg-dbg.h >> create mode 100644 drivers/rapidio/devices/lsi/axxia-rio-irq.c >> create mode 100644 drivers/rapidio/devices/lsi/axxia-rio-irq.h >> create mode 100644 drivers/rapidio/devices/lsi/axxia-rio-sysfs.c >> create mode 100644 drivers/rapidio/devices/lsi/axxia-rio.c >> create mode 100644 drivers/rapidio/devices/lsi/axxia-rio.h >> create mode 100644 drivers/rapidio/rio-destid.c >> create mode 100644 drivers/rapidio/rio-destid.h >> create mode 100644 drivers/rapidio/rio-dio.c >> create mode 100644 drivers/rapidio/rio-hotplug.c >> create mode 100644 drivers/rapidio/rio-hotplug.h >> create mode 100644 drivers/rapidio/rio-job.h >> create mode 100644 drivers/rapidio/rio-locks.c >> create mode 100644 drivers/rapidio/rio-locks.h >> create mode 100644 drivers/rapidio/rio-multicast.h >> create mode 100644 drivers/rapidio/rio-net.h >> create mode 100644 drivers/rapidio/rio-net2.c >> create mode 100644 drivers/rapidio/rio-quirks.c >> create mode 100644 drivers/rapidio/rio-route.c >> create mode 100644 drivers/rapidio/rio-route.h >> create mode 100644 include/linux/rio-axxia.h >> create mode 100644 include/linux/rio_dio.h >> create mode 100644 include/linux/riopw.h >> > -- > _______________________________________________ > linux-yocto mailing list > linux-yocto@yoctoproject.org > https://lists.yoctoproject.org/listinfo/linux-yocto -- "Thou shalt not follow the NULL pointer, for chaos and madness await thee at its end" -- _______________________________________________ linux-yocto mailing list linux-yocto@yoctoproject.org https://lists.yoctoproject.org/listinfo/linux-yocto
