Add the configuration fragments needed to build the 4.1 standard and preempt-rt linux kernel for the Axxia 5600 platform, based on the arm 64-bit architecture.
Signed-off-by: Cristian Bercaru <cristian.berc...@windriver.com> --- bsp/axxiaarm64/axxiaarm64-preempt-rt.scc | 8 + bsp/axxiaarm64/axxiaarm64-standard.scc | 8 + bsp/axxiaarm64/axxiaarm64.cfg | 239 ++++++++++++++++++++++++++++++ bsp/axxiaarm64/axxiaarm64.scc | 6 + bsp/axxiaarm64/hardware.kcf | 1 + bsp/axxiaarm64/kvm.cfg | 18 +++ bsp/axxiaarm64/kvm.scc | 4 + 7 files changed, 284 insertions(+) create mode 100644 bsp/axxiaarm64/axxiaarm64-preempt-rt.scc create mode 100644 bsp/axxiaarm64/axxiaarm64-standard.scc create mode 100644 bsp/axxiaarm64/axxiaarm64.cfg create mode 100644 bsp/axxiaarm64/axxiaarm64.scc create mode 100644 bsp/axxiaarm64/hardware.kcf create mode 100644 bsp/axxiaarm64/kvm.cfg create mode 100644 bsp/axxiaarm64/kvm.scc diff --git a/bsp/axxiaarm64/axxiaarm64-preempt-rt.scc b/bsp/axxiaarm64/axxiaarm64-preempt-rt.scc new file mode 100644 index 0000000..8f3b075 --- /dev/null +++ b/bsp/axxiaarm64/axxiaarm64-preempt-rt.scc @@ -0,0 +1,8 @@ +define KMACHINE axxiaarm64 +define KTYPE preempt-rt +define KARCH arm64 + +include ktypes/preempt-rt +branch axxia + +include axxiaarm64.scc diff --git a/bsp/axxiaarm64/axxiaarm64-standard.scc b/bsp/axxiaarm64/axxiaarm64-standard.scc new file mode 100644 index 0000000..d9e57fe --- /dev/null +++ b/bsp/axxiaarm64/axxiaarm64-standard.scc @@ -0,0 +1,8 @@ +define KMACHINE axxiaarm64 +define KTYPE standard +define KARCH arm64 + +include ktypes/standard +branch axxia + +include axxiaarm64.scc diff --git a/bsp/axxiaarm64/axxiaarm64.cfg b/bsp/axxiaarm64/axxiaarm64.cfg new file mode 100644 index 0000000..4cabaf0 --- /dev/null +++ b/bsp/axxiaarm64/axxiaarm64.cfg @@ -0,0 +1,239 @@ +#......................................................................... +# WARNING +# +# This file is a kernel configuration fragment, and not a full kernel +# configuration file. The final kernel configuration is made up of +# an assembly of processed fragments, each of which is designed to +# capture a specific part of the final configuration (e.g. platform +# configuration, feature configuration, and board specific hardware +# configuration). For more information on kernel configuration, please +# consult the product documentation. +# +#......................................................................... + +# +# General setup +# +# CONFIG_FHANDLE is not set +CONFIG_AUDIT=y + +# +# Timers subsystem +# +CONFIG_NO_HZ_IDLE=y + +# +# Platform selection +# +CONFIG_ARCH_AXXIA=y +CONFIG_ARCH_THUNDER=y +CONFIG_ARCH_VEXPRESS=y +CONFIG_ARCH_XGENE=y + +# +# Processor Features +# +CONFIG_ARCH_PHYS_ADDR_T_64BIT=y +CONFIG_ARCH_DMA_ADDR_T_64BIT=y +CONFIG_ARM_ARCH_TIMER=y + +# +# Boot options +# +CONFIG_CMDLINE="console=ttyAMA0" + +# +# Bus support +# +CONFIG_ARM_AMBA=y +CONFIG_PCI=y +CONFIG_PCI_DOMAINS=y +CONFIG_PCI_SYSCALL=y +CONFIG_PCI_MSI=y + +# +# Kernel Features +# +CONFIG_SMP=y + +# +# Generic Driver Options +# +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_FW_LOADER=y +CONFIG_DMA_CMA=y + +CONFIG_MTD=y +CONFIG_MTD_OF_PARTS=y + +# +# Network testing +# +# CONFIG_WIRELESS is not set + +# +# Generic Driver Options +# +CONFIG_REGMAP=y +CONFIG_REGMAP_MMIO=y + +# +# Bus devices +# +CONFIG_ARM_CCI=y + +# +# LPDDR & LPDDR2 PCM memory drivers +# +CONFIG_MTD_M25P80=y +CONFIG_MTD_SPI_NOR=y +CONFIG_DTC=y +CONFIG_OF=y + +# +# Device Tree and Open Firmware support +# +CONFIG_BLK_DEV_LOOP=y +CONFIG_BLK_DEV_RAM_SIZE=35000 + +# +# Misc devices +# +CONFIG_LSI_MTC=y +CONFIG_ATA=y + +# +# SCSI device support +# +# CONFIG_SCSI_PROC_FS is not set + +# +# SCSI support type (disk, tape, CD-ROM) +# +# CONFIG_SCSI_LOWLEVEL is not set + +# +# Controllers with non-SFF native interface +# +CONFIG_SATA_AHCI=y +CONFIG_SATA_AHCI_PLATFORM=y +CONFIG_AHCI_XGENE=y + +# +# Hardware I/O ports +# +CONFIG_SERIO_AMBAKMI=y + +# +# Serial drivers +# +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_AMBA_PL011=y +CONFIG_SERIAL_AMBA_PL011_CONSOLE=y +CONFIG_SERIAL_OF_PLATFORM=y +CONFIG_HW_RANDOM=y +CONFIG_HW_RANDOM_AXXIA=y +# CONFIG_HW_RANDOM_XGENE is not set +CONFIG_I2C=y +CONFIG_I2C_CHARDEV=y +CONFIG_I2C_MUX=y +CONFIG_I2C_AXXIA=y + +CONFIG_SPI=y +CONFIG_SPI_PL022=y +CONFIG_SPI_SPIDEV=y + +# +# Memory mapped GPIO drivers: +# +CONFIG_GPIOLIB=y +CONFIG_GPIO_SYSFS=y +CONFIG_GPIO_PL061=y +CONFIG_GPIO_GENERIC_PLATFORM=y +CONFIG_GPIO_XGENE=y + +# +# Distributed Switch Architecture drivers +# +CONFIG_ETHERNET=y +CONFIG_NET_XGENE=y +# CONFIG_NET_LSI_FEMAC is not set +CONFIG_SMC91X=y +CONFIG_SMSC911X=y + +# +# MII PHY device drivers +# +CONFIG_MICREL_PHY=y +CONFIG_FIXED_PHY=y +CONFIG_MICREL_KS8995MA=y +# CONFIG_PPP is not set +# CONFIG_SLIP is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO_SERPORT is not set + +# +# Character devices +# +CONFIG_LEGACY_PTY_COUNT=16 + +# +# USB Network Adapters +# +# CONFIG_WLAN is not set + +# +# USB GPIO expanders +# +CONFIG_POWER_RESET_AXXIA=y +# CONFIG_HWMON is not set +# CONFIG_WATCHDOG is not set + +# +# Multifunction device drivers +# +CONFIG_MFD_SYSCON=y +CONFIG_REGULATOR=y +CONFIG_REGULATOR_FIXED_VOLTAGE=y + +# CONFIG_USB_DWC3_PCI is not set +CONFIG_USB_DWC3=y +CONFIG_USB_ULPI=y +CONFIG_MMC=y + +# +# MMC/SD/SDIO Host Controller Drivers +# +CONFIG_MMC_ARMMMCI=y +CONFIG_MMC_SDHCI=y +CONFIG_MMC_SDHCI_PLTFM=y +CONFIG_MMC_SPI=y +CONFIG_RTC_CLASS=y + +# +# Platform RTC drivers +# +CONFIG_RTC_DRV_EFI=y + +# +# on-CPU RTC drivers +# +CONFIG_RTC_DRV_XGENE=y + +CONFIG_DMADEVICES=y +# CONFIG_VIRTIO_PCI is not set +# CONFIG_IOMMU_SUPPORT is not set + +# +# PHY Subsystem +# +CONFIG_GENERIC_PHY=y +CONFIG_PHY_XGENE=y diff --git a/bsp/axxiaarm64/axxiaarm64.scc b/bsp/axxiaarm64/axxiaarm64.scc new file mode 100644 index 0000000..effc509 --- /dev/null +++ b/bsp/axxiaarm64/axxiaarm64.scc @@ -0,0 +1,6 @@ +include features/usb/xhci-hcd.scc +include cfg/usb-mass-storage.scc +include cfg/virtio.scc +include kvm.scc + +kconf hardware axxiaarm64.cfg diff --git a/bsp/axxiaarm64/hardware.kcf b/bsp/axxiaarm64/hardware.kcf new file mode 100644 index 0000000..6aa8119 --- /dev/null +++ b/bsp/axxiaarm64/hardware.kcf @@ -0,0 +1 @@ +arch/arm/mach-axxia/Kconfig diff --git a/bsp/axxiaarm64/kvm.cfg b/bsp/axxiaarm64/kvm.cfg new file mode 100644 index 0000000..e967e77 --- /dev/null +++ b/bsp/axxiaarm64/kvm.cfg @@ -0,0 +1,18 @@ +#......................................................................... +# WARNING +# +# This file is a kernel configuration fragment, and not a full kernel +# configuration file. The final kernel configuration is made up of +# an assembly of processed fragments, each of which is designed to +# capture a specific part of the final configuration (e.g. platform +# configuration, feature configuration, and board specific hardware +# configuration). For more information on kernel configuration, please +# consult the product documentation. +# +#......................................................................... + +CONFIG_VIRTUALIZATION=y +CONFIG_KVM=y +CONFIG_KVM_ARM_HOST=y +CONFIG_KVM_ARM_MAX_VCPUS=4 +CONFIG_KVM_MMIO=y diff --git a/bsp/axxiaarm64/kvm.scc b/bsp/axxiaarm64/kvm.scc new file mode 100644 index 0000000..c867555 --- /dev/null +++ b/bsp/axxiaarm64/kvm.scc @@ -0,0 +1,4 @@ +define KFEATURE_DESCRIPTION "Enable KVM host support" +define KFEATURE_COMPATIBILITY all + +kconf non-hardware kvm.cfg -- 1.7.9.5 -- _______________________________________________ linux-yocto mailing list linux-yocto@yoctoproject.org https://lists.yoctoproject.org/listinfo/linux-yocto