From: Andy Shevchenko <andriy.shevche...@linux.intel.com>

commit e0599e216341d4e0b69b57145c956a7028f06a81 upstream.

Instead of using id->driver_data directly we copied it to the internal
structure. This will help to adapt driver for ACPI use.

Signed-off-by: Andy Shevchenko <andriy.shevche...@linux.intel.com>
Signed-off-by: Linus Walleij <linus.wall...@linaro.org>
(cherry picked from commit c6664149af2939b8bbaef0711b3ca5469bed33fb)
---
 drivers/gpio/gpio-pca953x.c | 17 ++++++++++-------
 1 file changed, 10 insertions(+), 7 deletions(-)

diff --git a/drivers/gpio/gpio-pca953x.c b/drivers/gpio/gpio-pca953x.c
index e2da64a..56f679b 100644
--- a/drivers/gpio/gpio-pca953x.c
+++ b/drivers/gpio/gpio-pca953x.c
@@ -42,6 +42,9 @@
 #define PCA_INT                        0x0100
 #define PCA953X_TYPE           0x1000
 #define PCA957X_TYPE           0x2000
+#define PCA_TYPE_MASK          0xF000
+
+#define PCA_CHIP_TYPE(x)       ((x) & PCA_TYPE_MASK)
 
 static const struct i2c_device_id pca953x_id[] = {
        { "pca9505", 40 | PCA953X_TYPE | PCA_INT, },
@@ -95,6 +98,7 @@ struct pca953x_chip {
        struct gpio_chip gpio_chip;
        const char *const *names;
        int     chip_type;
+       unsigned long driver_data;
 };
 
 static inline struct pca953x_chip *to_pca(struct gpio_chip *gc)
@@ -514,14 +518,13 @@ static irqreturn_t pca953x_irq_handler(int irq, void 
*devid)
 }
 
 static int pca953x_irq_setup(struct pca953x_chip *chip,
-                            const struct i2c_device_id *id,
                             int irq_base)
 {
        struct i2c_client *client = chip->client;
        int ret, i, offset = 0;
 
        if (client->irq && irq_base != -1
-                       && (id->driver_data & PCA_INT)) {
+                       && (chip->driver_data & PCA_INT)) {
 
                switch (chip->chip_type) {
                case PCA953X_TYPE:
@@ -574,12 +577,11 @@ static int pca953x_irq_setup(struct pca953x_chip *chip,
 
 #else /* CONFIG_GPIO_PCA953X_IRQ */
 static int pca953x_irq_setup(struct pca953x_chip *chip,
-                            const struct i2c_device_id *id,
                             int irq_base)
 {
        struct i2c_client *client = chip->client;
 
-       if (irq_base != -1 && (id->driver_data & PCA_INT))
+       if (irq_base != -1 && (chip->driver_data & PCA_INT))
                dev_warn(&client->dev, "interrupt support not compiled in\n");
 
        return 0;
@@ -666,14 +668,15 @@ static int pca953x_probe(struct i2c_client *client,
 
        chip->client = client;
 
-       chip->chip_type = id->driver_data & (PCA953X_TYPE | PCA957X_TYPE);
+       chip->driver_data = id->driver_data;
+       chip->chip_type = PCA_CHIP_TYPE(chip->driver_data);
 
        mutex_init(&chip->i2c_lock);
 
        /* initialize cached registers from their original values.
         * we can't share this chip with another i2c master.
         */
-       pca953x_setup_gpio(chip, id->driver_data & PCA_GPIO_MASK);
+       pca953x_setup_gpio(chip, chip->driver_data & PCA_GPIO_MASK);
 
        if (chip->chip_type == PCA953X_TYPE)
                ret = device_pca953x_init(chip, invert);
@@ -686,7 +689,7 @@ static int pca953x_probe(struct i2c_client *client,
        if (ret)
                return ret;
 
-       ret = pca953x_irq_setup(chip, id, irq_base);
+       ret = pca953x_irq_setup(chip, irq_base);
        if (ret)
                return ret;
 
-- 
2.5.0

-- 
_______________________________________________
linux-yocto mailing list
linux-yocto@yoctoproject.org
https://lists.yoctoproject.org/listinfo/linux-yocto

Reply via email to