From: "Chai, Chong Yi" <chong.yi.c...@intel.com> Hi Bruce,
The feature branch (additional 66 commits) for enabling Valleyisland are ready to be fetched from Github. This branch is targeted for kernel linux-yocto-3.14. URL: https://github.com/yoctobsp/linux-yocto-3.14.git Branch: standard/valleyisland Stats: Andy Shevchenko (9): dma: dw: allocate memory in two stages in probe dmaengine: dw: enable clock before access dmaengine: dw: fix regression in dw_probe() function dmaengine: dw: move dw_dmac.h to where it belongs to dmaengine: dw: convert dw_dma_slave to use explicit HS interfaces dmaengine: dw: apply both HS interfaces and remove slave_id usage dmaengine: dw: introduce generic filter function dmaengine: dw: move clock operations to platform.c serial: 8250: don't use slave_id of dma_slave_config Antonio Ospite (1): spi/pxa2xx: fix runtime PM enabling order Chew, Chiau Ee (5): x86/Kconfig: add PCI dependency for CONFIG_X86_INTEL_LPSS x86/byt: enable board file for BYT LPSS PCI mode dma: dw: Fix Intel MID DMA driver and Designware DMA driver loading sequence spi/pxa2xx: change default supported DMA burst size to 1 spi/pxa2xx: fix incorrect SW mode chipselect setting for BayTrail LPSS SPI Chew, Kean Ho (4): pinctrl-baytrail: unmap interrupt when free the gpio pin pinctrl-baytrail: enable platform device in the absent of ACPI enumeration pinctrl-baytrail: setup IOAPIC interrupt for GPIO clusters on non-ACPI system mmc: sdhci: Force BYT SDCARD host to run with SDR25 mode Heikki Krogerus (2): serial: 8250_pci: remove rts_n override from Baytrail quirk ACPI / LPSS: not using UART RTS override with Auto Flow Control Jingoo Han (1): spi: pxa2xx: remove unnecessary OOM messages Loic Poulain (1): 8250_dw: Support all baudrates on baytrail Maurice Petallo (7): i2c: allow Designware I2C to be probed before SMBus for Baytrail mmc: sdhci: Preset value not supported in Baytrail eMMC mmc: sdhci: add DDR50 1.8V mode support for BayTrail eMMC Controller serial: 8250_pci: mask UART TX completion intr in byt_set_termios serial: 8250_dw: mask UART TX completion intr in byt_set_termios serial: 8250_core: handle_irq returns 1 only if data was processed thermal: Intel SoC DTS: Don't do thermal zone update inside spin_lock Mika Westerberg (2): spi/pxa2xx: Prevent DMA from transferring too many bytes spi/pxa2xx: Don't use slave_id of dma_slave_config Roger Quadros (1): usb: dwc3: core: Fix gadget for system suspend/resume Sarah Sharp (1): usb/xhci: Change how we indicate a host supports Link PM. Srinivas Pandruvada (1): thermal: Intel SoC DTS thermal Wan Ahmad Zainie (31): dmaengine: dw: fix checkpatch.pl warnings pinctrl-baytrail: Serialize GPIO registers access with global spinlock hpet: refactor driver hpet: implement start/stop/query API hpet: Fix checkpatch.pl warnings i2c: designware: cleanup irq handler setting i2c: designware: use hardware-provided Rx/Tx FIFO depths i2c: designware: use symbolic names for command bits i2c: designware: cleanup __i2c_dw_enable() i2c: designware: explicitly abort running operation on disable i2c: designware: improve FIFO performance i2c: designware: add per-channel speed parameter and fast-plus speed option i2c: designware: add i2c high-speed support i2c: designware: Fix checkpatch.pl warnings mmc: block: refactor read-only handling mmc: block: implement write request blocking mmc: support whole-device temporary write protection over CSD bits 13:12 mmc: block: Fix checkpatch.pl warning pwm: Add freq_hz and duty_percent libata: add curr_xfer_mode attribute libata: enable atapi_an by default libata: handle HDIO_SET_DMA & HDIO_GET_DMA ioctl scsi: add extended information to MEDIA_CHANGE serial: 8250: Override the DCD and DSR pin status for Bay Trail spi/pxa2xx: auto switch between PIO and DMA with configurable threshold size spi: modify spidev_test to test automatic PIO/DMA switching spi/pxa2xx: Add new ioctl for configuring FIFO trigger level in runtime spi: modify spidev_test to test modifying FIFO trigger level during runtime usb: core: hub: Generate uevent for overcurrent event usb: core: hub: Fix checkpatch.pl error watchdog: iTCO_wdt: Fix checkpatch.pl warnings Documentation/spi/spidev_test.c | 74 ++- MAINTAINERS | 2 +- arch/avr32/mach-at32ap/at32ap700x.c | 17 +- arch/avr32/mach-at32ap/include/mach/atmel-mci.h | 2 +- arch/x86/Kconfig | 9 +- arch/x86/platform/Makefile | 3 + arch/x86/platform/byt/Makefile | 1 + arch/x86/platform/byt/byt-board.c | 84 ++++ drivers/acpi/acpi_lpss.c | 24 +- drivers/ata/libata-core.c | 4 +- drivers/ata/libata-scsi.c | 34 ++ drivers/ata/libata-transport.c | 15 +- drivers/char/hpet.c | 644 +++++++++++++++--------- drivers/dma/Makefile | 2 +- drivers/dma/dw/core.c | 108 ++-- drivers/dma/dw/internal.h | 28 +- drivers/dma/dw/platform.c | 86 ++-- drivers/dma/dw/regs.h | 20 +- drivers/i2c/busses/Makefile | 2 +- drivers/i2c/busses/i2c-designware-core.c | 109 ++-- drivers/i2c/busses/i2c-designware-core.h | 8 +- drivers/i2c/busses/i2c-designware-pcidrv.c | 143 ++++-- drivers/i2c/busses/i2c-designware-platdrv.c | 119 ++++- drivers/mmc/Kconfig | 1 + drivers/mmc/card/Kconfig | 13 + drivers/mmc/card/block.c | 247 ++++++++- drivers/mmc/core/mmc.c | 2 + drivers/mmc/core/mmc_ops.c | 91 ++++ drivers/mmc/core/mmc_ops.h | 1 + drivers/mmc/core/sd.c | 4 + drivers/mmc/host/sdhci-acpi.c | 7 +- drivers/mmc/host/sdhci-pci.c | 6 +- drivers/mmc/host/sdhci.c | 3 +- drivers/pinctrl/Kconfig | 19 +- drivers/pinctrl/Makefile | 1 + drivers/pinctrl/pinctrl-baytrail-dev.c | 159 ++++++ drivers/pinctrl/pinctrl-baytrail.c | 114 ++++- drivers/pwm/core.c | 95 +++- drivers/pwm/sysfs.c | 71 +++ drivers/scsi/scsi_lib.c | 80 +++ drivers/scsi/sr.c | 8 + drivers/spi/spi-pxa2xx-dma.c | 33 +- drivers/spi/spi-pxa2xx-pci.c | 64 ++- drivers/spi/spi-pxa2xx.c | 60 ++- drivers/spi/spidev.c | 19 + drivers/thermal/Kconfig | 12 + drivers/thermal/Makefile | 1 + drivers/thermal/intel_soc_dts_thermal.c | 481 ++++++++++++++++++ drivers/tty/serial/8250/8250.h | 6 +- drivers/tty/serial/8250/8250_core.c | 37 +- drivers/tty/serial/8250/8250_dw.c | 110 +++- drivers/tty/serial/8250/8250_pci.c | 81 ++- drivers/usb/core/Kconfig | 9 + drivers/usb/core/hub.c | 87 +++- drivers/usb/dwc3/core.c | 2 +- drivers/usb/host/xhci-hub.c | 8 +- drivers/usb/host/xhci-pci.c | 6 - drivers/watchdog/iTCO_wdt.c | 6 +- include/linux/dw_dmac.h | 114 ----- include/linux/libata.h | 1 + include/linux/mmc/card.h | 4 +- include/linux/mmc/core.h | 1 + include/linux/mmc/sdhci.h | 2 + include/linux/pinctrl/pinctrl-byt.h | 16 + include/linux/platform_data/dma-dw.h | 112 +++++ include/linux/pwm.h | 50 ++ include/linux/serial_8250.h | 1 + include/linux/serial_core.h | 1 + include/linux/spi/pxa2xx_spi.h | 9 +- include/linux/spi/spi.h | 3 + include/scsi/scsi_device.h | 18 + include/sound/atmel-abdac.h | 2 +- include/sound/atmel-ac97c.h | 2 +- include/uapi/linux/hpet.h | 11 +- include/uapi/linux/spi/spidev.h | 5 + sound/atmel/abdac.c | 2 +- sound/atmel/ac97c.c | 2 +- 77 files changed, 3053 insertions(+), 785 deletions(-) create mode 100644 arch/x86/platform/byt/Makefile create mode 100644 arch/x86/platform/byt/byt-board.c create mode 100644 drivers/pinctrl/pinctrl-baytrail-dev.c create mode 100644 drivers/thermal/intel_soc_dts_thermal.c delete mode 100644 include/linux/dw_dmac.h create mode 100644 include/linux/pinctrl/pinctrl-byt.h create mode 100644 include/linux/platform_data/dma-dw.h -- 1.9.1 -- _______________________________________________ linux-yocto mailing list linux-yocto@yoctoproject.org https://lists.yoctoproject.org/listinfo/linux-yocto
