Please consider pull-request listed below.  We tested on Grosse Tete and verify
proper PM for USB after applying the set.  This was rebased onto latest of
bxt-rebase, but I think we should consider also for standard/intel/base.

Let me know if you have questions/issues.

-Eric


The following changes since commit 256385e1e85055afb8432ecf0aeee65e2590d142:

  usb: typec: add PD sink port support for Intel Whiskey Cove PMIC USB Type-C 
PHY driver (2016-07-15 11:05:09 -0400)

are available in the git repository at:

  https://github.com/egernst/linux-yocto-4.4.git bxt-dwc3-pm-backport

for you to fetch changes up to f6d09c801315b8d90681eff66668b90c19cb0e51:

  UPSTREAM: usb: Add USB 3.1 Precision time measurement capability descriptor 
support (2016-07-19 16:34:20 -0700)

----------------------------------------------------------------
Dan Carpenter (1):
      UPSTREAM: usb: dwc3: gadget: fix mask and shift order in DWC3_DCFG_NUMP()

Du, Changbin (1):
      UPSTREAM: usb: dwc3: make dwc3_debugfs_init return value be void

Felipe Balbi (50):
      UPSTREAM: usb: dwc3: drop FIFO resizing logic
      UPSTREAM: usb: dwc3: gadget: always enable CSP
      UPSTREAM: usb: dwc3: gadget: purge dev_dbg() calls
      UPSTREAM: usb: dwc3: gadget: pass a condition to dev_WARN_ONCE()
      UPSTREAM: usb: dwc3: core: purge dev_dbg() calls
      UPSTREAM: usb: dwc3: core: improve reset sequence
      UPSTREAM: usb: dwc3: gadget: fix endpoint renaming
      UPSTREAM: usb: dwc3: core: fix PHY handling during suspend
      UPSTREAM: usb: dwc3: better name for our request management lists
      UPSTREAM: usb: dwc3: remove num_event_buffers
      UPSTREAM: usb: dwc3: drop ev_buffs array
      UPSTREAM: usb: dwc3: gadget: pass ev_buff as cookie to irq handler
      UPSTREAM: usb: dwc3: gadget: combine return points into a single one
      UPSTREAM: usb: dwc3: gadget: clear SUSPHY bit before ep cmds
      UPSTREAM: usb: dwc3: gadget: extract unlocked dwc3_gadget_wakeup()
      UPSTREAM: usb: dwc3: gadget: put link to U0 before Start Transfer
      UPSTREAM: usb: dwc3: gadget: rename busy/free_slot to trb_enqueue/dequeue
      UPSTREAM: usb: dwc3: increase maximum number of TRBs per endpoint
      UPSTREAM: usb: dwc3: core: document struct dwc3_request
      UPSTREAM: usb: dwc3: switch trb enqueue/dequeue and first_trb_index to u8
      UPSTREAM: usb: dwc3: get rid of DWC3_TRB_MASK
      UPSTREAM: usb: dwc3: gadget: add trb enqueue/dequeue helpers
      UPSTREAM: usb: dwc3: gadget: move % operation to increment helpers
      UPSTREAM: usb: dwc3: gadget: use link TRB for all endpoint types
      UPSTREAM: usb: dwc3: gadget: remove newline from trace
      UPSTREAM: usb: dwc3: gadget: don't interrupt when chained
      UPSTREAM: usb: dwc3: core: add fifo space helper
      UPSTREAM: usb: dwc3: core: add helper to extract trb type
      UPSTREAM: usb: dwc3: gadget: update DCFG.NumP to max burst size
      UPSTREAM: usb: dwc3: gadget: disable automatic calculation of ACK TP NUMP
      FROMLIST: usb: dwc3: gadget: re-factor ->udc_start and ->udc_stop
      FROMLIST: usb: dwc3: gadget: fix gadget suspend/resume
      FROMLIST: usb: dwc3: core: get rid of DWC3_PM_OPS macro
      FROMLIST: usb: dwc3: gadget: prepare TRBs on update transfers too
      FROMLIST: usb: dwc3: gadget: simplify __dwc3_gadget_kick_transfer()
      FROMLIST: usb: dwc3: gadget: rely on sg_is_last() and list_is_last()
      FROMLIST: usb: dwc3: gadget: remove udelay(1) when sending ep cmds
      FROMLIST: usb: dwc3: gadget: return 0 if we try to Wakeup in superspeed
      FROMLIST: usb: dwc3: gadget: split __dwc3_gadget_kick_transfer()
      FROMLIST: usb: dwc3: gadget: initialize NUMP based on RxFIFO Size
      FROMLIST: usb: dwc3: gadget: pass dep as argument to endpoint command
      FROMLIST: usb: dwc3: gadget: add a pointer to endpoint registers
      FROMLIST: usb: dwc3: core: move fladj to dwc3 structure
      FROMLIST: usb: dwc3: core: re-factor init and exit paths
      FROMLIST: usb: dwc3: core: simplify suspend/resume operations
      FROMLIST: usb: dwc3: gadget: hold gadget IRQ in dwc->irq_gadget
      FROMLIST: usb: dwc3: gadget: only resume USB2 PHY in <=HIGHSPEED
      FROMLIST: usb: dwc3: gadget: fix for possible endpoint disable race
      FROMLIST: usb: dwc3: implement runtime PM
      FROMLIST: usb: dwc3: pci: add Power Management dummy hooks

Heikki Krogerus (2):
      UPSTREAM: usb: dwc3: pci: make build-in device properties available
      UPSTREAM: usb: dwc3: pci: pass the platform device as a parameter to 
dwc3_pci_quirks()

Jiebing Li (1):
      UPSTREAM: usb: dwc3: gadget: release spin lock during gadget resume

John Youn (7):
      UPSTREAM: usb: dwc3: Update speed checks for SuperSpeedPlus
      UPSTREAM: usb: dwc3: Enable SuperSpeedPlus
      UPSTREAM: usb: dwc3: Update maximum_speed for SuperSpeedPlus
      UPSTREAM: usb: dwc3: Validate the maximum_speed parameter
      UPSTREAM: usb: dwc3: Set the ClearPendIN bit on Clear Stall EP command
      UPSTREAM: usb: dwc3: DWC_usb31 controller check
      UPSTREAM: usb: dwc3: Update register fields for SuperSpeedPlus

Konrad Leszczynski (2):
      UPSTREAM: usb: dwc3: gadget: give better command return code
      FROMLIST: usb: dwc3: fix for the isoc transfer EP_BUSY flag

Mathias Nyman (3):
      UPSTREAM: usb: define USB_SPEED_SUPER_PLUS speed for SuperSpeedPlus 
USB3.1 devices
      UPSTREAM: usb: Add USB3.1 SuperSpeedPlus Isoc Endpoint Companion 
descriptor
      UPSTREAM: usb: Add USB 3.1 Precision time measurement capability 
descriptor support

Rajesh Bhagat (1):
      UPSTREAM: usb: dwc3: add disable receiver detection in P3 quirk

Roger Quadros (1):
      UPSTREAM: usb: dwc3: gadget: Fix suspend/resume during device mode

 Documentation/devicetree/bindings/usb/dwc3.txt     |   4 +-
 .../devicetree/bindings/usb/qcom,dwc3.txt          |   1 -
 drivers/usb/common/common.c                        |   1 +
 drivers/usb/core/config.c                          |   6 +-
 drivers/usb/core/devices.c                         |  10 +-
 drivers/usb/core/hcd-pci.c                         |   2 +-
 drivers/usb/core/hcd.c                             |   6 +-
 drivers/usb/core/hub.c                             |  26 +-
 drivers/usb/core/urb.c                             |   3 +-
 drivers/usb/core/usb.h                             |   2 +-
 drivers/usb/dwc3/core.c                            | 501 ++++++-----
 drivers/usb/dwc3/core.h                            | 146 ++-
 drivers/usb/dwc3/debug.h                           |   6 +-
 drivers/usb/dwc3/debugfs.c                         | 245 ++---
 drivers/usb/dwc3/dwc3-pci.c                        |  57 +-
 drivers/usb/dwc3/ep0.c                             |  47 +-
 drivers/usb/dwc3/gadget.c                          | 990 +++++++++++----------
 drivers/usb/dwc3/gadget.h                          |  10 +-
 drivers/usb/dwc3/io.h                              |   7 +-
 drivers/usb/dwc3/platform_data.h                   |   2 +-
 include/linux/usb.h                                |   1 +
 include/uapi/linux/usb/ch9.h                       |  29 +
 22 files changed, 1167 insertions(+), 935 deletions(-)


-- 
_______________________________________________
linux-yocto mailing list
linux-yocto@yoctoproject.org
https://lists.yoctoproject.org/listinfo/linux-yocto

Reply via email to