On 2017-07-15 11:25 AM, Nathan Rossi wrote:
The XILINX_VMDA config is no longer required, the VDMA driver is no
longer separate from the XILINX_DMA driver config.
The CPU_FREQ_STAT_DETAILS config was consolidated into CPU_FREQ_STAT.
The EDAC drivers now depend on the RAS config and features, for the tiny
kernel type this needs to be enabled to allow for use of EDAC.
Additionally remove CONFIG_EDAC_MM_EDAC, this config has be consolidated
into CONFIG_EDAC.
merged.
Bruce
Signed-off-by: Nathan Rossi <nat...@nathanrossi.com>
---
bsp/xilinx/soc/drivers-softip.cfg | 1 -
bsp/xilinx/soc/drivers-zynq.cfg | 2 +-
bsp/xilinx/soc/zynq.cfg | 1 -
3 files changed, 1 insertion(+), 3 deletions(-)
diff --git a/bsp/xilinx/soc/drivers-softip.cfg
b/bsp/xilinx/soc/drivers-softip.cfg
index 5098d9b2b9..bc4f13bee9 100644
--- a/bsp/xilinx/soc/drivers-softip.cfg
+++ b/bsp/xilinx/soc/drivers-softip.cfg
@@ -9,7 +9,6 @@ CONFIG_SERIAL_OF_PLATFORM=y
# DMA
CONFIG_DMADEVICES=y
CONFIG_XILINX_DMA=y
-CONFIG_XILINX_VDMA=y
# Watchdog
CONFIG_WATCHDOG=y
diff --git a/bsp/xilinx/soc/drivers-zynq.cfg b/bsp/xilinx/soc/drivers-zynq.cfg
index daffe670b3..4abce2c37f 100644
--- a/bsp/xilinx/soc/drivers-zynq.cfg
+++ b/bsp/xilinx/soc/drivers-zynq.cfg
@@ -9,8 +9,8 @@ CONFIG_SERIAL_XILINX_PS_UART_CONSOLE=y
CONFIG_SRAM=y
# EDAC
+CONFIG_RAS=y
CONFIG_EDAC=y
-CONFIG_EDAC_MM_EDAC=y
CONFIG_EDAC_SYNOPSYS=y
# DMA
diff --git a/bsp/xilinx/soc/zynq.cfg b/bsp/xilinx/soc/zynq.cfg
index bfc74460fb..3678f4a6f5 100644
--- a/bsp/xilinx/soc/zynq.cfg
+++ b/bsp/xilinx/soc/zynq.cfg
@@ -31,7 +31,6 @@ CONFIG_CPU_THERMAL=y
# CPU Frequency
CONFIG_CPU_FREQ=y
CONFIG_CPU_FREQ_STAT=y
-CONFIG_CPU_FREQ_STAT_DETAILS=y
CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y
CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
CONFIG_CPU_FREQ_GOV_POWERSAVE=y
--
_______________________________________________
linux-yocto mailing list
linux-yocto@yoctoproject.org
https://lists.yoctoproject.org/listinfo/linux-yocto
