On Tue, Aug 20, 2019 at 7:25 AM Kevin Hao <kexin....@windriver.com> wrote:
>
> Hi Bruce,
>
> This patch series adds the support for the Marvell cn96xx SoC. The OCTEON TX2
> cn96xx SoC is a scalable architecture that integrates high performance 64-bit
> Armv8.2 processors, a cache-coherent interconnect, hardware accelerators,
> virtualized networking, and scalable I/O. It support the following
> industry-standard I/O interfaces:
>         DDR4 DRAM
>         PCI Express 4.0 version 1.0
>         SGMII
>         QSGMII
>         XAUI
>         XFI
>         CAUI
>
> Most of the patches are for the Marvell specific drivers. So in theory, it
> should be safe to merge these patches to the standard/base branch. But I
> prefer to stage them to the specific standard/cn96xx branch. The reason is
> that we plan to support other Marvell SoCs, and the SDK for them may be
> based on different SDK versions. They will definitely touch some common
> files affect by this patch series. So it would be a nightmare for us to
> support them if these patches are merged to the standard/base branch.
>
> The following changes since commit ce4ec6ff9589e3b1dcc4e3a0b192b02823631c3e:
>
>   Merge tag 'v5.3-rc5' into standard/base (2019-08-18 22:40:47 -0400)
>
> are available in the Git repository at:
>
>   git://github.com/haokexin/linux standard/cn96xx

standard/cn96xx now exists in linux-yocto-dev.

Bruce

>
> for you to fetch changes up to 4fae437f7ea88d2aab10cac684e11d94b12114bd:
>
>   octeontx2-af: Fix the using of variable length arrays (2019-08-20 11:25:36 
> +0800)
>
> ----------------------------------------------------------------
> Aleksey Makarov (6):
>       octeontx2-pf: Set irq affinity hints for CQ interrupts
>       octeontx2-pf: Implement ndo_tx_timeout callback
>       octeontx2-pf: Support queue interrupts
>       octeontx2-pf: Add reset count to stats
>       octeontx2-af: Add low level support for Marvell PTP coprocessor
>       octeontx2-pf: Add support for PTP clock
>
> Angela Czubak (2):
>       octeontx2-af: fix rvu_sso_ggrp_taq_flush
>       octeontx2-af: fix cgx_lmac_rx_tx_enable
>
> Chandrakala Chavva (1):
>       mmc: cavium_thunderx: Use proper register to clear interrupts
>
> Christina Jacob (21):
>       octeontx2-pf: BQL support.
>       octeontx2-pf: IRQ coalescing config and tuning via ethtool
>       octeontx2-af: Dump current resource provisioning status
>       octeontx2-pf: Adding ethtool support for link status information.
>       octeontx2-af: Patch to prevent redundant message from pf to af.
>       octeontx2-pf: Fix redundant message from AF to PF
>       octeontx2-af: Support to get link info like current speed, fec etc
>       octeontx2-pf: Ethtool support for fec configuration
>       octeontx2-pf: Fix smmuv3 messages while deferring pf driver probe.
>       octeontx2-af: Move to rvu_fwdata version 1.
>       octeontx2-pf: Add ethtool -m option support.
>       octeontx2-af: Extend fwdata structure with additional information.
>       octeontx2-af: Update fwadata structure with few more reserved fields.
>       octeontx2-af: Fetch FEC stats of the physical link
>       octeontx2-pf: Support to display fec counters also in ethtool stats.
>       octeontx2-af: sync ATF and Kernel firmware data structure.
>       octeontx2-pf: Support to display current settings of a vf network 
> interface via ethtool
>       net:thunderx: fix memory leak in nicvf driver.
>       soc: octeontx2: Add mdio command interface using debugfs
>       octeontx2-af: Introduce SET_LINK_MODE command to change various 
> configurations of a network interface.
>       octeontx2-pf: support to change link speed and autoneg
>
> Felix Manlunas (2):
>       octeontx2-af: Add new CGX_CMDs to set and get PHY modulation type
>       octeontx2-pf: Add ethtool priv flag to control PAM4 on/off
>
> Geetha sowjanya (26):
>       octeontx2-af: Sync hw mbox with bounce buffer.
>       octeontx2-pf: Add mailbox bounce buffer
>       octeontx2-pf: Add interface stats to ndo_get_stats64
>       octeontx2-af: Config receive and transmission of pause frames
>       octeontx2-af: Add mbox message to enable/disable pause frames.
>       octeontx2-af: Add mbox messages to configure backpressure for an 
> interface.
>       octeontx2-pf: Add ethtool support to enable/disable pause frames
>       octeontx2-pf: Configure RED drop levels for packet reception.
>       octeontx2-pf: Configure backpressure level for packet reception
>       octeontx2-pf: Skip CQ_STATUS read if pending CQEs greater than budget
>       octeontx2-pf: Set RVU PF/VF watchdog timeout
>       octeontx2-af: Check SQ counters to detect the deadlock
>       octeontx2-af: Enable pci bus mastering
>       octeontx2-af: Fix rvu probe on cgx disable
>       octeontx2-pf: Add VF function level reset (FLR) support
>       octeontx2-vf: Configure backpressure level for packet reception
>       octeontx2-af: Support configurable NDC cache way_mask
>       octeontx2: Fix mbox driver compilation dependency.
>       octeontx2-pf: Set minimum MTU size to 64 bytes
>       octeontx2-pf: Schedule work to refill RQ if buffer alloc fails in 
> atomic context.
>       octeontx2-pf: Free HW resources on PF/VF initialization failure
>       octeontx2-af: Update hardware workarounds for 95xx A1 silicon
>       octeontx2-pf: Update hardware workarounds for 95xx A1 silicon
>       PCI: quirks : Apply ACS quirk for all devices
>       octeontx2-pf: Enable CQ interrupt coalescing
>       octeontx2-pf: Fix RQ CQ RED and DROP levels for 96xx B0
>
> Hao Zheng (10):
>       octeontx2-af: change NPC KPU profile format
>       octeontx2-af: NPC KPU profile update (ver 1.3.0):
>       octeontx2-af: NPC KPU profile fix
>       octeontx2-af: add NPC parser support for QinQ with TPID of 0x8100
>       octeontx2-af: Turn on L2 multicast address check
>       octeontx2-af: NPC parser profile change, move lb_ptr to point to tpid
>       octeontx2-af: NPC parser profile add support for nix_inst_hdr on tx
>       octeontx2-af: reorganize NPC parser profile for tunnel protocols
>       octeontx2-af: provide parser support for mpls in udp
>       octeontx2-af: fix parser error for udp packets with no payload
>
> Harman Kalra (3):
>       octeontx2-af: Support for PTP notification to PF
>       octeontx2-af: Adding PTP CGX config cleanup in FLR
>       octeontx2-af: Sending tsc value to the userspace
>
> Jerin Jacob (3):
>       octeontx2-af: add npa error af interrupt handlers
>       octeontx2-af: add nix error af interrupt handlers
>       octeontx2-af: Workaround for NIX CQ hang HW issue
>
> Kevin Hao (2):
>       octeontx2-af: Compatible with the old firmware version
>       octeontx2-af: Fix the using of variable length arrays
>
> Kiran Kumar K (6):
>       octeontx2-af: Add support for rss key types
>       octeontx2-af: Add rss flow key tunnel types
>       octeontx2-af: Add inner layer rss support
>       octeontx2-af: align rss flow alg with npc profile
>       octeontx2-af: Extract layer ID LE's ltypes to NPC parse key
>       octeontx2-af: NPC Tx parse data key ext profile
>
> Krzysztof Garczynski (1):
>       octeontx2-af: txschq limits handling
>
> Linu Cherian (10):
>       iommu/arm-smmu-v3: Force 32 byte command queue memory reads on CN96XX 
> SMMU
>       octeontx2-af: Restore MSIXTR_BASE register upon module exit
>       octeontx2-af: Misc CGX changes
>       octeontx2-af: Use the right wake_up API variant in CGX command interface
>       octeontx2-pf: Add support to configure loopback
>       octeontx2-pf: Register and handle CGX link notifications
>       octeontx2-af: Update CGX speed mapping table for 80G
>       octeontx2-af: Add support for importing firmware data
>       octeontx2-pf: Keep link notification enabled until device detach
>       octeontx2-af: Support NIX rx/tx counters at CGX port level
>
> Lukasz Bartosik (2):
>       octeontx2-af: add CPT support to AF driver
>       octeontx2-af: don't register CPT AF interrupts
>
> Nithin Dabilpuram (5):
>       octeontx2-af: Clear NPC MCAM entries before update
>       octeontx2-af: add support for changing vlan tpid
>       octeontx2-af: enable cgx lmac tx link while flush
>       octeontx2-af: NDC sync op af mbox support
>       octeontx2-af: Fix inner l4 layer id
>
> Pavan Nikhilesh (16):
>       octeontx2-af: add mbox to configure thresholds per HWGRP
>       octeontx2-af: Add TIM unit support.
>       octeontx2-af: add workaround for TIM reverse lookup
>       octeontx2-af: update TIM 10ns clk source min interval
>       octeontx2-af: add mbox to get SSO GWS/GGRP stats
>       octeontx2-af: update SSO GWS teardown sequence
>       octeontx2-af: update SSO HWGRP teardown sequence
>       octeontx2-af: manually dain partially consumed TAQ buffers
>       octeontx2-af: add intradevice FLR handling
>       octeontx2-af: ignore sso lf count when checking pffunc validity
>       octeontx2-af: restore sso hwgrp default thresholds
>       octeontx2-af: drain xaq before reconfiguring aura
>       octeontx2-af: use get blkaddr function instead of macro
>       octeontx2-af: add sso error af interrupt handlers
>       octeontx2-af: add debugfs support for sso
>       octeontx2-af: fix TIM slot to lf lookup
>
> Peter Swain (14):
>       gpio: octeontx2: extend PIN_SEL to cover cn96xx
>       gpio: thunderx: avoid potential deadlock
>       mmc: cavium: fix shutdown deadlock with active sd-card
>       mmc: cavium: forbid unaligned DMA
>       mmc: cavium: finish_dma_single() should teardown/unmap
>       mmc: cavium: skip unavailable slots
>       mmc: cavium: CMD19/21 type correction
>       mmc: octeontx: cn96xx HS200-8wide-100MHz
>       mmc: cavium: track & apply CMD6 bus changes ASAP
>       mmc: cavium: execute_tuning for octeontx2
>       mmc: cavium: avoid single-slot startup issues
>       mmc: cavium: fix swiotlb buffer is full
>       mmc: cavium: correct clock divisor
>       mmc: cavium: amend hs400 tuning
>
> Prakash Brahmajyosyula (7):
>       octeontx2-af: Add NPA qsize {aura,pool}_contexts to debugfs
>       octeontx2-af: Add CGX LMAC stats to debugfs
>       octeontx2-af: Add NIX RQ, SQ and CQ contexts to debugfs
>       octeontx2-af: Add NDC block stats to debugfs.
>       octeontx2-af: add nix {cq,rq and sq} qsize contexts to debugfs.
>       net: cavium: Add PTP subsystem ids, to recongnize new chips.
>       octeontx2-pf: msglvl based debug support.
>
> Radha Mohan Chintakuntla (8):
>       octeontx2-af: Add SSO unit support to the AF driver
>       gpio: thunderx: Add support for EL0 interrupts for GPIO
>       gpio: thunderx: Remove char device when exiting driver
>       gpio: thunderx: Adjust the msi base for cn96xx gpio
>       misc: otx_bphy_ctr: Add OcteonTx2 BPHY control driver
>       misc: otx_bphy_ctr: Increase the maximum BPHY interrupts to be supported
>       misc: otx_bphy_ctr: Allow maximum interrupts of 27 to userspace in BPHY
>       octeontx2-af: Skip CGX probe if not connected to NIX
>
> SrujanaChalla (2):
>       octeontx2-af: Add CPT debug entries to debugfs
>       crypto: restructure marvell directory
>
> Stanislaw Kardach (17):
>       octeontx2-af: Add resource partitioning config
>       octeontx2-af: Add free rsrc count mbox msg
>       octeontx2-af: adjust rvu limits for no-VF case
>       soc: octeontx2-rm: add Marvell OcteonTX2 RM driver
>       soc: octeontx2-rm: add domain sysfs
>       soc: octeontx2-rm: enable bus master
>       soc: octeontx2-rm: fix compilation warnings
>       octeontx2-rm: fix strncpy ranges
>       octeontx2-af: fix TIM block address usage
>       octeontx2-af: add TIM LF teardown
>       octeontx2-af: enable PTP driver on LOKI platform
>       octeontx2-af: fix policy validation for LBK VFs
>       octeontx2-af: check TXSCHQ policy when needed
>       drivers: spi: octeontx2: add entry of PCI device for LOKI
>       octeontx2-af: report RCLK/SCLK values through mbox
>       octeontx2-rm: rework MBOX_MSG_READY handling
>       octeontx2-rm: add knob for PMCCNTR_EL0 access config
>
> Subbaraya Sundeep (34):
>       octeontx2-af: Extract outer vlan in case of stacked vlan
>       octeontx2-af: Add support to verify channel
>       octeontx2-af: Add macro to generate mbox handlers declarations
>       octeontx2-af: Add support for scanning KEX profile
>       octeontx2-af: Add mbox messages to install and delete flows
>       octeontx2-af: Delete RXVLAN_ALLOC mailbox message
>       octeontx2-af: Use install flow function for unicast rule
>       octeontx2-af: Add support to display mcam rules
>       octeontx2-af: Fix loop in free and unmap counter
>       octeontx2-pf: Protect mailbox access against race conditions
>       octeontx2-pf: add support for stripping STAG/CTAG
>       octeontx2-pf: Add ethtool ntuple filters support
>       octeontx2-af: Use default unicast RSS action when installing a flow
>       octeontx2-af: Remove unnecessary error message
>       octeontx2-pf: Check IFF_MULTICAST too when enabling multicast
>       octeontx2-pf: Synchronize mailbox for PF and VF messages
>       octeontx2-pf: Delete ntuple filters for VF upon FLR
>       octeontx2-af: Start/Stop traffic in CGX along with NPC
>       octeontx2-pf: Cleanup properly during driver remove
>       octeontx2-af: Use proper error message
>       octeontx2-af: Modify KEX to extract VLAN TCI correctly
>       octeontx2-af: Scan VLAN TCI correctly
>       octeontx2-af: Simplify key overlap check
>       octeontx2-pf: Remove vf flows cleanup functions
>       octeontx2-af: Disable MCAM entries during NIX_LF_FREE
>       octeontx2-pf: Compile PF driver only when enabled
>       octeontx2-af: Do not clear NIX_AQ_RES_S too early
>       octeontx2-af: Display message timeout error
>       octeontx2-af: Do not set/clear num_msgs of PF1 mbox always
>       octeontx2-pf: Do not set/clear num_msgs of VF0 mbox always
>       octeontx2-pf: Delete RX VLAN offload support
>       octeontx2-af: Do not clear NPA_AQ_RES_S too early
>       octeontx2-af: Do not error out for debugfs partial reads
>       octeontx2-af: Support installing TX MCAM rules
>
> Subrahmanyam Nilla (3):
>       soc: octeontx2-dpi: add dpi-pf driver
>       soc: octeontx2-rm: handle dpivf reservations
>       soc: octeontx2-dpi: disable DPI PF driver by default in Kconfig
>
> Sujeet Baranwal (9):
>       mmc: octeontx2: add check for 8/9xxx chips
>       mmc: cavium_mmc: Configure sample command and data directly
>       mmc: octeontx2: emmc operation limited to 100 MHz
>       mmc: octeontx2: interrupt addition for ncb fault
>       mmc: octeontx2: incorporate hw interface io ctl params
>       mmc: octeontx2: calibrate tap delay
>       mmc: octeontx2: emmc tuning for delay
>       mmc: octeontx2: use device tree entries
>       mmc: cn95xx: cmd and data out values fixture
>
> Suneel Garapati (5):
>       pci: octeontx2: Add PCI host controller driver for OcteonTx2
>       drivers: spi: add support for octeontx2 spi controller
>       drivers: spi: add subsys ID for thunder driver
>       drivers: spi: octeontx2: add entry of pci device id for 95xx
>       drivers: i2c: thunderx: octeontx2 clock divisor logic changes
>
> Sunil Goutham (61):
>       pci: octeontx2: Workaround for PEM config space writes
>       pci: octeontx2: Disable inbound write merging
>       octeontx2-af: Add mbox API to validate all responses
>       octeontx2-af: Don't treat lack of CGX interfaces as error
>       octeontx2-af: Setup resource limits before enabling VFs
>       octeontx2-pf: Add Marvell OcteonTX2 NIC driver
>       octeontx2-pf: Init mailbox communication with AF
>       octeontx2-pf: Attach RVU NIX and NPA block LFs
>       octeontx2-pf: Init NPA and NIX LF's context's memory
>       octeontx2-pf: Initialize NPA auras and pools
>       octeontx2-pf: Initialize NIX RQ/SQ/CQ contexts
>       octeontx2-pf: Alloc and config transmit scheduler queues
>       octeontx2-pf: Add CQ interrupt and NAPI handlers
>       octeontx2-pf: Add receive packet handling support
>       octeontx2-pf: Support for packet transmission
>       octeontx2-pf: Free hardware resources on interface teardown
>       octeontx2-pf: MAC address configuration support
>       octeontx2-pf: Support for ndo_change_mtu callback
>       octeontx2-pf: Add ndo_set_rx_mode and support for promisc/allmulti
>       octeontx2-pf: Support for Rx/Tx csum offload
>       octeontx2-pf: Add receive side scaling support
>       octeontx2-pf: Set skb->hash from HW
>       octeontx2-pf: TCP segmentation offload support
>       octeontx2-pf: Software TSO support for pass1 silicon
>       octeontx2-pf: Add basic ethtool support
>       octeontx2-pf: Support to set/show RSS hash options from ethtool
>       octeontx2-af: Set discovery ID for RVUM block
>       octeontx2-af: Disable Rx backpressure during SMQ flush
>       octeontx2-af: Skip creating limits pci file for undiscovered RVU PFs
>       octeontx2-af: Add NPC MCAM allocation status to debugfs
>       octeontx2-af: Set proper errorcode for IPv4 checksum errors
>       octeontx2-af: Increase register poll timeout
>       octeontx2-af: Fix mbox error debug message
>       octeontx2-pf: Fix memory leak due to error packets
>       octeontx2-pf: Defer probe if discovery id is not setup
>       octeontx2-pf: Fix receive buffer address handling
>       octeontx2-af: Support for fixed transmit scheduler topology
>       coteontx2-af: Add mbox for retrieving HW capabilities
>       octeontx2-af: Workaround for NIX transmit stall issue
>       octeontx2-af: Disable SQ manager sticky mode operation
>       octeontx2-pf: Add support for PF/VF mbox communication
>       soc: octeontx2-rm: Defer probe if discovery id is not setup
>       net: thunderx: Do a PCS reset upon SGMII link toggle
>       octeontx2-af: Fix XOFF toggling in PSE restore logic
>       octeontx2-af: Add option to disable dynamic entry caching in NDC
>       octeontx2-af: Cleanup CGX config permission checks
>       octeontx2-af: Update workarounds for hardware issues
>       octeontx2-pf: Update workarounds for hardware issues
>       Revert "PCI: Assign bus numbers present in EA capability for bridges"
>       octeontx2-af: Create tx_stall debugfs entry only for 96xx
>       net: thunderx: Adjust CQE_RX drop levels for better performance
>       octeontx2-pf: Add receive errors to stats
>       octeontx2-af: Apply relevant HW issue workarounds for 96xx B0 silicon
>       octeontx2-pf: Always show physical link status
>       octeontx2-pf: Don't enable RQ RED/DROP interrupts
>       octeontx2-pf: Support for HW TSO offload
>       octeontx2-af: Enable broadcast packet replication
>       octeontx2-af: Add error messages in driver exit path
>       octeontx2-af: Remove express traffic support
>       octeontx2-pf: Fix RQ/SQ ringsize config done via ethtool
>       octeontx2-pf: Fix and simplify IRQ coalescing settings
>
> Sunil Kumar Kori (2):
>       octeontx2-af: CGX DMAC filtering support
>       octeontx2-af: Set MAC address resource bit map to its default during FLR
>
> Tomasz Duszynski (13):
>       octeontx2-pf: Add basic SR-IOV support
>       octeontx2-vf: Add driver skeleton
>       octeontx2-vf: Add support for PF/VF mbox communication
>       octeontx2-pf: Export symbols needed by VF driver
>       octeontx2-vf: Add support for attaching resources
>       octeontx2-vf: Add netdevice callbacks
>       octeontx2-pf: Notify VFs about link changes
>       octeontx2-vf: Add ethtool support
>       octeontx2-pf: Add support for SR-IOV management
>       octeontx2-vf: Add support for AF attached VFs (LBK)
>       octeontx2-pf: assign default mac address during probe
>       octeontx2-vf: assign default mac address during probe
>       octeontx2-pf: do not handle VF link event twice
>
> Vamsi Attunuru (4):
>       octeontx2-af: Add NIX_GET_MAC_ADDR mailbox message
>       octeontx2-af: Add mbox to read mcam entry
>       octeontx2-af: add support to alloc & free tx vlan config resources
>       octeontx2-af: Handle physical link state change requests
>
> Vidya Velumuri (1):
>       octeontx2-af: Support to enable/disable Inline Ipsec functionality
>
> Yuri Tolstov (1):
>       octeontx2-af: Fix CGX promisc mode configuration
>
> Zyta Szpak (1):
>       octeontx2-af: Support to enable/disable HW timestamping
>
> hariprasad (5):
>       octeontx2-af: Release mutex resource
>       octeontx2-af: Delete range of mcam entries
>       octeontx2-pf: Add unicast filter support
>       octeontx2-pf: Add tx vlan offload support
>       octeontx2-pf: Add validation in ntuple delete flow
>
>  MAINTAINERS                                                |     2 +-
>  drivers/crypto/Makefile                                    |     2 +-
>  drivers/crypto/marvell/{ => cesa}/Makefile                 |     0
>  drivers/crypto/marvell/{ => cesa}/cesa.c                   |     0
>  drivers/crypto/marvell/{ => cesa}/cesa.h                   |     0
>  drivers/crypto/marvell/{ => cesa}/cipher.c                 |     0
>  drivers/crypto/marvell/{ => cesa}/hash.c                   |     0
>  drivers/crypto/marvell/{ => cesa}/tdma.c                   |     0
>  drivers/gpio/gpio-thunderx.c                               |   310 +-
>  drivers/i2c/busses/i2c-octeon-core.c                       |    24 +-
>  drivers/i2c/busses/i2c-octeon-core.h                       |    14 +
>  drivers/i2c/busses/i2c-thunderx-pcidrv.c                   |     6 +
>  drivers/iommu/arm-smmu-v3.c                                |    26 +
>  drivers/misc/Kconfig                                       |     8 +
>  drivers/misc/Makefile                                      |     1 +
>  drivers/misc/otx_bphy_ctr.c                                |   284 ++
>  drivers/mmc/host/cavium-octeon.c                           |    10 +-
>  drivers/mmc/host/cavium-thunderx.c                         |    89 +-
>  drivers/mmc/host/cavium.c                                  |   880 +++++-
>  drivers/mmc/host/cavium.h                                  |   135 +-
>  drivers/net/ethernet/cavium/common/cavium_ptp.c            |    10 +-
>  drivers/net/ethernet/cavium/thunder/nicvf_queues.c         |     2 +-
>  drivers/net/ethernet/cavium/thunder/nicvf_queues.h         |     4 +-
>  drivers/net/ethernet/cavium/thunder/thunder_bgx.c          |     8 +
>  drivers/net/ethernet/marvell/octeontx2/Kconfig             |    23 +
>  drivers/net/ethernet/marvell/octeontx2/Makefile            |     2 +
>  drivers/net/ethernet/marvell/octeontx2/af/Makefile         |     4 +-
>  drivers/net/ethernet/marvell/octeontx2/af/cgx.c            |   579 +++-
>  drivers/net/ethernet/marvell/octeontx2/af/cgx.h            |    52 +-
>  drivers/net/ethernet/marvell/octeontx2/af/cgx_fw_if.h      |    49 +-
>  drivers/net/ethernet/marvell/octeontx2/af/common.h         |    18 +
>  drivers/net/ethernet/marvell/octeontx2/af/mbox.c           |    77 +-
>  drivers/net/ethernet/marvell/octeontx2/af/mbox.h           |   726 ++++-
>  drivers/net/ethernet/marvell/octeontx2/af/npc.h            |   125 +-
>  drivers/net/ethernet/marvell/octeontx2/af/npc_profile.h    | 14067 
> ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++-------------------------
>  drivers/net/ethernet/marvell/octeontx2/af/ptp.c            |   237 ++
>  drivers/net/ethernet/marvell/octeontx2/af/ptp.h            |    32 +
>  drivers/net/ethernet/marvell/octeontx2/af/rvu.c            |   500 +++-
>  drivers/net/ethernet/marvell/octeontx2/af/rvu.h            |   445 ++-
>  drivers/net/ethernet/marvell/octeontx2/af/rvu_cgx.c        |   476 ++-
>  drivers/net/ethernet/marvell/octeontx2/af/rvu_cpt.c        |   544 ++++
>  drivers/net/ethernet/marvell/octeontx2/af/rvu_debugfs.c    |  2946 
> +++++++++++++++++++
>  drivers/net/ethernet/marvell/octeontx2/af/rvu_fixes.c      |   999 +++++++
>  drivers/net/ethernet/marvell/octeontx2/af/rvu_nix.c        |  1711 
> ++++++++---
>  drivers/net/ethernet/marvell/octeontx2/af/rvu_npa.c        |   296 +-
>  drivers/net/ethernet/marvell/octeontx2/af/rvu_npc.c        |   696 ++++-
>  drivers/net/ethernet/marvell/octeontx2/af/rvu_npc_fs.c     |  1150 ++++++++
>  drivers/net/ethernet/marvell/octeontx2/af/rvu_ptp.c        |    37 +
>  drivers/net/ethernet/marvell/octeontx2/af/rvu_reg.h        |   298 +-
>  drivers/net/ethernet/marvell/octeontx2/af/rvu_sso.c        |  1322 +++++++++
>  drivers/net/ethernet/marvell/octeontx2/af/rvu_struct.h     |    89 +-
>  drivers/net/ethernet/marvell/octeontx2/af/rvu_tim.c        |   322 +++
>  drivers/net/ethernet/marvell/octeontx2/af/rvu_validation.c |   806 ++++++
>  drivers/net/ethernet/marvell/octeontx2/af/rvu_validation.h |    72 +
>  drivers/net/ethernet/marvell/octeontx2/nic/Makefile        |    13 +
>  drivers/net/ethernet/marvell/octeontx2/nic/otx2_common.c   |  1440 ++++++++++
>  drivers/net/ethernet/marvell/octeontx2/nic/otx2_common.h   |   648 +++++
>  drivers/net/ethernet/marvell/octeontx2/nic/otx2_ethtool.c  |  1313 +++++++++
>  drivers/net/ethernet/marvell/octeontx2/nic/otx2_flows.c    |   497 ++++
>  drivers/net/ethernet/marvell/octeontx2/nic/otx2_pf.c       |  2423 
> ++++++++++++++++
>  drivers/net/ethernet/marvell/octeontx2/nic/otx2_ptp.c      |   223 ++
>  drivers/net/ethernet/marvell/octeontx2/nic/otx2_ptp.h      |    20 +
>  drivers/net/ethernet/marvell/octeontx2/nic/otx2_reg.h      |   155 +
>  drivers/net/ethernet/marvell/octeontx2/nic/otx2_struct.h   |   425 +++
>  drivers/net/ethernet/marvell/octeontx2/nic/otx2_txrx.c     |  1016 +++++++
>  drivers/net/ethernet/marvell/octeontx2/nic/otx2_txrx.h     |   142 +
>  drivers/net/ethernet/marvell/octeontx2/nic/otx2_vf.c       |   648 +++++
>  drivers/pci/controller/Kconfig                             |     8 +
>  drivers/pci/controller/Makefile                            |     1 +
>  drivers/pci/controller/pci-octeontx2-pem.c                 |   489 ++++
>  drivers/pci/probe.c                                        |    54 +-
>  drivers/pci/quirks.c                                       |     4 +-
>  drivers/soc/Kconfig                                        |     1 +
>  drivers/soc/Makefile                                       |     1 +
>  drivers/soc/marvell/Kconfig                                |    85 +
>  drivers/soc/marvell/Makefile                               |     4 +
>  drivers/soc/marvell/mdio_debugfs.c                         |   119 +
>  drivers/soc/marvell/octeontx2-dpi/Makefile                 |     8 +
>  drivers/soc/marvell/octeontx2-dpi/dpi.c                    |   525 ++++
>  drivers/soc/marvell/octeontx2-dpi/dpi.h                    |   246 ++
>  drivers/soc/marvell/octeontx2-rm/Makefile                  |    11 +
>  drivers/soc/marvell/octeontx2-rm/domain_sysfs.c            |   832 ++++++
>  drivers/soc/marvell/octeontx2-rm/domain_sysfs.h            |    18 +
>  drivers/soc/marvell/octeontx2-rm/otx2_rm.c                 |  1581 ++++++++++
>  drivers/soc/marvell/octeontx2-rm/otx2_rm.h                 |    95 +
>  drivers/soc/marvell/octeontx2-rm/quota.c                   |   192 ++
>  drivers/soc/marvell/octeontx2-rm/quota.h                   |    90 +
>  drivers/spi/Kconfig                                        |     9 +
>  drivers/spi/Makefile                                       |     1 +
>  drivers/spi/spi-cavium-thunderx.c                          |    18 +-
>  drivers/spi/spi-octeontx2.c                                |   355 +++
>  drivers/spi/spi-octeontx2.h                                |   148 +
>  include/uapi/linux/pci_regs.h                              |     6 -
>  93 files changed, 39398 insertions(+), 4981 deletions(-)
>  rename drivers/crypto/marvell/{ => cesa}/Makefile (100%)
>  rename drivers/crypto/marvell/{ => cesa}/cesa.c (100%)
>  rename drivers/crypto/marvell/{ => cesa}/cesa.h (100%)
>  rename drivers/crypto/marvell/{ => cesa}/cipher.c (100%)
>  rename drivers/crypto/marvell/{ => cesa}/hash.c (100%)
>  rename drivers/crypto/marvell/{ => cesa}/tdma.c (100%)
>  create mode 100644 drivers/misc/otx_bphy_ctr.c
>  create mode 100644 drivers/net/ethernet/marvell/octeontx2/af/ptp.c
>  create mode 100644 drivers/net/ethernet/marvell/octeontx2/af/ptp.h
>  create mode 100644 drivers/net/ethernet/marvell/octeontx2/af/rvu_cpt.c
>  create mode 100644 drivers/net/ethernet/marvell/octeontx2/af/rvu_debugfs.c
>  create mode 100644 drivers/net/ethernet/marvell/octeontx2/af/rvu_fixes.c
>  create mode 100644 drivers/net/ethernet/marvell/octeontx2/af/rvu_npc_fs.c
>  create mode 100644 drivers/net/ethernet/marvell/octeontx2/af/rvu_ptp.c
>  create mode 100644 drivers/net/ethernet/marvell/octeontx2/af/rvu_sso.c
>  create mode 100644 drivers/net/ethernet/marvell/octeontx2/af/rvu_tim.c
>  create mode 100644 drivers/net/ethernet/marvell/octeontx2/af/rvu_validation.c
>  create mode 100644 drivers/net/ethernet/marvell/octeontx2/af/rvu_validation.h
>  create mode 100644 drivers/net/ethernet/marvell/octeontx2/nic/Makefile
>  create mode 100644 drivers/net/ethernet/marvell/octeontx2/nic/otx2_common.c
>  create mode 100644 drivers/net/ethernet/marvell/octeontx2/nic/otx2_common.h
>  create mode 100644 drivers/net/ethernet/marvell/octeontx2/nic/otx2_ethtool.c
>  create mode 100644 drivers/net/ethernet/marvell/octeontx2/nic/otx2_flows.c
>  create mode 100644 drivers/net/ethernet/marvell/octeontx2/nic/otx2_pf.c
>  create mode 100644 drivers/net/ethernet/marvell/octeontx2/nic/otx2_ptp.c
>  create mode 100644 drivers/net/ethernet/marvell/octeontx2/nic/otx2_ptp.h
>  create mode 100644 drivers/net/ethernet/marvell/octeontx2/nic/otx2_reg.h
>  create mode 100644 drivers/net/ethernet/marvell/octeontx2/nic/otx2_struct.h
>  create mode 100644 drivers/net/ethernet/marvell/octeontx2/nic/otx2_txrx.c
>  create mode 100644 drivers/net/ethernet/marvell/octeontx2/nic/otx2_txrx.h
>  create mode 100644 drivers/net/ethernet/marvell/octeontx2/nic/otx2_vf.c
>  create mode 100644 drivers/pci/controller/pci-octeontx2-pem.c
>  create mode 100644 drivers/soc/marvell/Kconfig
>  create mode 100644 drivers/soc/marvell/Makefile
>  create mode 100644 drivers/soc/marvell/mdio_debugfs.c
>  create mode 100644 drivers/soc/marvell/octeontx2-dpi/Makefile
>  create mode 100644 drivers/soc/marvell/octeontx2-dpi/dpi.c
>  create mode 100644 drivers/soc/marvell/octeontx2-dpi/dpi.h
>  create mode 100644 drivers/soc/marvell/octeontx2-rm/Makefile
>  create mode 100644 drivers/soc/marvell/octeontx2-rm/domain_sysfs.c
>  create mode 100644 drivers/soc/marvell/octeontx2-rm/domain_sysfs.h
>  create mode 100644 drivers/soc/marvell/octeontx2-rm/otx2_rm.c
>  create mode 100644 drivers/soc/marvell/octeontx2-rm/otx2_rm.h
>  create mode 100644 drivers/soc/marvell/octeontx2-rm/quota.c
>  create mode 100644 drivers/soc/marvell/octeontx2-rm/quota.h
>  create mode 100644 drivers/spi/spi-octeontx2.c
>  create mode 100644 drivers/spi/spi-octeontx2.h
>
> Thanks,
> Kevin



-- 
- Thou shalt not follow the NULL pointer, for chaos and madness await
thee at its end
- "Use the force Harry" - Gandalf, Star Trek II
-- 
_______________________________________________
linux-yocto mailing list
linux-yocto@yoctoproject.org
https://lists.yoctoproject.org/listinfo/linux-yocto

Reply via email to