In message: [linux-yocto v5.2] Another patch series for the Marvell cn96xx support on 31/10/2019 Kevin Hao wrote:
> Hi Bruce, > > Here is another patch series for the Marvell cn96xx SoC support. It mainly > focus on the coresight and Ethernet drivers. Please help me merge this to: > v5.2/standard/cn96xx > v5.2/standard/preempt-rt/cn96xx > > The following changes since commit ea644ca0c23daa58925be27754d0cac01ed50e9b: > > Merge branch 'v5.2/standard/base' into v5.2/standard/cn96xx (2019-10-29 > 20:34:04 -0400) > > are available in the Git repository at: > > g...@github.com:haokexin/linux v5.2/standard/cn96xx Thanks Kevin, this is now merged to both branches. Bruce > > for you to fetch changes up to 9c320cb186dc953deb487ffd15ee8ee1c6281fe4: > > coresight: Fix assumptions on coresight topology (2019-10-31 19:39:41 +0800) > > ---------------------------------------------------------------- > Christina Jacob (3): > octeontx2-pf: remove redundant changes from speed change suppcrt. > octeontx-af: Interface mode change feature via ethtool > octeontx2-pf: Interface Mode change using ethtool. > > Geetha sowjanya (3): > iommu/arm-smmu-v3: Force 32 byte command queue memory reads > octeontx2-pf: Add shutdown sequence for PF/VF > octeontx2-pf: Reset the PF/VF on MTU change > > Hao Zheng (2): > octeontx2-af: kpu profile update for protocol nvgre > octeontx2-af: kpu profile fix for a missing action entry > > Kiran Kumar K (1): > octeontx2-af: match nvgre as ltype > > Linu Cherian (4): > coresight: etm4x: Add Marvell OcteontTx CN9xxx ETM device > coresight: tmc: Add Marvell OcteonTx CN9xxx TMC device > coresight: tmc: Fixes for Marvell OcteonTx CN9xxx ETR HW issues. > coresight: Fix assumptions on coresight topology > > Nithin Dabilpuram (1): > octeontx2-af: fix backpressure cfg on lf alloc and free > > Peter Swain (3): > mmc: cavium: calibrate otx2 just once > mmc: dt-bindings: describe cavium vmmc/vqmmc > gpio: add no-frills i2c->gpio expander > > Stanislaw Kardach (1): > octeontx2-af: reserve top LD/LTYPEs for custom KPU > > Subbaraya Sundeep (5): > octeontx2-pf: Do not set mac address again > octeontx2-pf: Clear mbox interrupt status early > octeontx2-af: Do not exit when firmware unavailable > octeontx2-af: Init mcam resources after loading profile > octeontx2-af: Fix default profile loading checks > > Sunil Goutham (1): > net: thunderx: Fix RSS flow hash settings display > > hariprasad (2): > octeontx2-pf: Add rx vlan offload support > octeontx2-af: update address of global CGX RX_STATS > > Documentation/devicetree/bindings/arm/coresight.txt | 4 ++ > Documentation/devicetree/bindings/gpio/gpio-i2c.txt | 32 > +++++++++++++++ > Documentation/devicetree/bindings/mmc/cavium-mmc.txt | 48 > ++++++++++++++++++++-- > MAINTAINERS | 5 +++ > drivers/gpio/Kconfig | 12 ++++++ > drivers/gpio/Makefile | 1 + > drivers/gpio/gpio-i2c.c | 206 > ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ > drivers/hwtracing/coresight/coresight-etm-perf.c | 2 +- > drivers/hwtracing/coresight/coresight-etm4x.c | 1 + > drivers/hwtracing/coresight/coresight-priv.h | 3 +- > drivers/hwtracing/coresight/coresight-tmc-etr.c | 72 > +++++++++++++++++++++++++++++++- > drivers/hwtracing/coresight/coresight-tmc.c | 21 ++++++++++ > drivers/hwtracing/coresight/coresight-tmc.h | 94 > +++++++++++++++++++++++++++++++++++++++++- > drivers/hwtracing/coresight/coresight.c | 25 +++++++++++- > drivers/iommu/arm-smmu-v3.c | 18 +++++--- > drivers/mmc/host/cavium.h | 1 - > drivers/net/ethernet/cavium/thunder/nicvf_ethtool.c | 34 > +++++++++------- > drivers/net/ethernet/marvell/octeontx2/af/cgx.c | 132 > ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++- > drivers/net/ethernet/marvell/octeontx2/af/cgx_fw_if.h | 33 > ++++++++++++++- > drivers/net/ethernet/marvell/octeontx2/af/mbox.h | 14 ++++++- > drivers/net/ethernet/marvell/octeontx2/af/npc.h | 16 ++++++++ > drivers/net/ethernet/marvell/octeontx2/af/npc_profile.h | 10 ++++- > drivers/net/ethernet/marvell/octeontx2/af/rvu.c | 26 ++++++------ > drivers/net/ethernet/marvell/octeontx2/af/rvu_nix.c | 13 ++++-- > drivers/net/ethernet/marvell/octeontx2/af/rvu_npa.c | 2 + > drivers/net/ethernet/marvell/octeontx2/af/rvu_npc.c | 11 ++--- > drivers/net/ethernet/marvell/octeontx2/nic/otx2_common.c | 17 -------- > drivers/net/ethernet/marvell/octeontx2/nic/otx2_common.h | 3 +- > drivers/net/ethernet/marvell/octeontx2/nic/otx2_ethtool.c | 93 > ++++++++++++++++++++++++++++++------------ > drivers/net/ethernet/marvell/octeontx2/nic/otx2_flows.c | 116 > +++++++++++++++++++++++++++++++++++++++++++++++++++- > drivers/net/ethernet/marvell/octeontx2/nic/otx2_pf.c | 54 > +++++++++++++++++------- > drivers/net/ethernet/marvell/octeontx2/nic/otx2_vf.c | 29 +++++++++++-- > 32 files changed, 1029 insertions(+), 119 deletions(-) > create mode 100644 Documentation/devicetree/bindings/gpio/gpio-i2c.txt > create mode 100644 drivers/gpio/gpio-i2c.c > > Thanks, > Kevin -- _______________________________________________ linux-yocto mailing list linux-yocto@yoctoproject.org https://lists.yoctoproject.org/listinfo/linux-yocto