This patch removes the current synchron state change function and add a
new function for a state assert. Change the start and stop callbacks to
use this new synchron state change behaviour. It's a wrapper around the
async state change function.
Signed-off-by: Alexander Aring <alex.ar...@gmail.com>
---
drivers/net/ieee802154/at86rf230.c | 126 ++++++++++++++++++++-----------------
1 file changed, 67 insertions(+), 59 deletions(-)
diff --git a/drivers/net/ieee802154/at86rf230.c
b/drivers/net/ieee802154/at86rf230.c
index 4ac7c4b..9829248 100644
--- a/drivers/net/ieee802154/at86rf230.c
+++ b/drivers/net/ieee802154/at86rf230.c
@@ -44,6 +44,8 @@ struct at86rf230_local;
* All timings are in us.
*/
struct at86rf2xx_chip_data {
+ u16 t_off_to_aack;
+ u16 t_off_to_tx_on;
u16 t_frame;
u16 t_p_ack;
/* short interframe spacing time */
@@ -79,6 +81,9 @@ struct at86rf230_local {
struct at86rf2xx_chip_data *data;
struct regmap *regmap;
+ struct completion state_complete;
+ struct at86rf230_state_change state;
+
struct at86rf230_state_change irq;
bool tx_aret;
@@ -549,6 +554,19 @@ at86rf230_async_state_delay(void *context)
}
switch (ctx->from_state) {
+ case STATE_TRX_OFF:
+ switch (ctx->to_state) {
+ case STATE_RX_AACK_ON:
+ usleep_range(c->t_off_to_aack, c->t_off_to_aack + 10);
+ goto change;
+ case STATE_TX_ON:
+ usleep_range(c->t_off_to_tx_on,
+ c->t_off_to_tx_on + 10);
+ goto change;
+ default:
+ break;
+ }
+ break;
case STATE_BUSY_RX_AACK:
switch (ctx->to_state) {
case STATE_TX_ON:
@@ -634,6 +652,39 @@ at86rf230_async_state_change(struct at86rf230_local *lp,
}
static void
+at86rf230_sync_state_change_complete(void *context)
+{
+ struct at86rf230_state_change *ctx = context;
+ struct at86rf230_local *lp = ctx->lp;
+
+ complete(&lp->state_complete);
+}
+
+/* This function do a sync framework above the async state change.
+ * Some callbacks of the IEEE 802.15.4 driver interface need to be
+ * handled synchronously.
+ */
+static int
+at86rf230_sync_state_change(struct at86rf230_local *lp, unsigned int state)
+{
+ int rc;
+
+ rc = at86rf230_async_state_change(lp, &lp->state, state,
+ at86rf230_sync_state_change_complete);
+ if (rc) {
+ at86rf230_async_error(lp, &lp->state, rc);
+ return rc;
+ }
+
+ rc = wait_for_completion_timeout(&lp->state_complete,
+ msecs_to_jiffies(100));
+ if (!rc)
+ return -ETIMEDOUT;
+
+ return 0;
+}
+
+static void
at86rf230_tx_complete(void *context)
{
struct at86rf230_state_change *ctx = context;
@@ -959,72 +1010,15 @@ at86rf230_ed(struct ieee802154_dev *dev, u8 *level)
}
static int
-at86rf230_state(struct ieee802154_dev *dev, int state)
-{
- struct at86rf230_local *lp = dev->priv;
- int rc;
- unsigned int val;
- u8 desired_status;
-
- might_sleep();
-
- if (state == STATE_FORCE_TX_ON)
- desired_status = STATE_TX_ON;
- else if (state == STATE_FORCE_TRX_OFF)
- desired_status = STATE_TRX_OFF;
- else
- desired_status = state;
-
- do {
- rc = at86rf230_read_subreg(lp, SR_TRX_STATUS, &val);
- if (rc)
- goto err;
- } while (val == STATE_TRANSITION_IN_PROGRESS);
-
- if (val == desired_status)
- return 0;
-
- /* state is equal to phy states */
- rc = at86rf230_write_subreg(lp, SR_TRX_CMD, state);
- if (rc)
- goto err;
-
- do {
- rc = at86rf230_read_subreg(lp, SR_TRX_STATUS, &val);
- if (rc)
- goto err;
- } while (val == STATE_TRANSITION_IN_PROGRESS);
-
-
- if (val == desired_status ||
- (desired_status == STATE_RX_ON && val == STATE_BUSY_RX) ||
- (desired_status == STATE_RX_AACK_ON && val == STATE_BUSY_RX_AACK))
- return 0;
-
- pr_err("unexpected state change: %d, asked for %d\n", val, state);
- return -EBUSY;
-
-err:
- pr_err("error: %d\n", rc);
- return rc;
-}
-
-static int
at86rf230_start(struct ieee802154_dev *dev)
{
- u8 rc;
-
- rc = at86rf230_state(dev, STATE_TX_ON);
- if (rc)
- return rc;
-
- return at86rf230_state(dev, STATE_RX_AACK_ON);
+ return at86rf230_sync_state_change(dev->priv, STATE_RX_AACK_ON);
}
static void
at86rf230_stop(struct ieee802154_dev *dev)
{
- at86rf230_state(dev, STATE_FORCE_TRX_OFF);
+ at86rf230_sync_state_change(dev->priv, STATE_FORCE_TRX_OFF);
}
static int
@@ -1244,6 +1238,8 @@ static struct ieee802154_ops at86rf230_ops = {
};
static struct at86rf2xx_chip_data at86rf233_data = {
+ .t_off_to_aack = 80,
+ .t_off_to_tx_on = 80,
.t_frame = 4096,
.t_p_ack = 545,
.t_sifs = 192,
@@ -1255,6 +1251,8 @@ static struct at86rf2xx_chip_data at86rf233_data = {
};
static struct at86rf2xx_chip_data at86rf231_data = {
+ .t_off_to_aack = 110,
+ .t_off_to_tx_on = 110,
.t_frame = 4096,
.t_p_ack = 545,
.t_sifs = 192,
@@ -1266,6 +1264,8 @@ static struct at86rf2xx_chip_data at86rf231_data = {
};
static struct at86rf2xx_chip_data at86rf212_data = {
+ .t_off_to_aack = 200,
+ .t_off_to_tx_on = 200,
.t_frame = 4096,
.t_p_ack = 545,
.t_sifs = 192,
@@ -1429,6 +1429,13 @@ at86rf230_detect_device(struct at86rf230_local *lp)
static void
at86rf230_setup_spi_messages(struct at86rf230_local *lp)
{
+ lp->state.lp = lp;
+ spi_message_init(&lp->state.msg);
+ lp->state.msg.context = &lp->state;
+ lp->state.trx.tx_buf = lp->state.buf;
+ lp->state.trx.rx_buf = lp->state.buf;
+ spi_message_add_tail(&lp->state.trx, &lp->state.msg);
+
lp->irq.lp = lp;
spi_message_init(&lp->irq.msg);
lp->irq.msg.context = &lp->irq;
@@ -1511,6 +1518,7 @@ static int at86rf230_probe(struct spi_device *spi)
spin_lock_init(&lp->lock);
init_completion(&lp->tx_complete);
+ init_completion(&lp->state_complete);
spi_set_drvdata(spi, lp);
--
2.0.1
------------------------------------------------------------------------------
Open source business process management suite built on Java and Eclipse
Turn processes into business applications with Bonita BPM Community Edition
Quickly connect people, data, and systems into organized workflows
Winner of BOSSIE, CODIE, OW2 and Gartner awards
http://p.sf.net/sfu/Bonitasoft
_______________________________________________
Linux-zigbee-devel mailing list
Linux-zigbee-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/linux-zigbee-devel
