Hi Alex,
Thanks for the review, I have one question below, when answered I'll respin a
v3 patch.
On 15/09/14 11:13, Alexander Aring wrote:
> Hi Martin,
>
> something is wrong with you mail client. I received the cover letter
> twice one has some wrong reply-to id. Please check this.
I did use git send-email, but my editor left a 0000-cover-letter.patch~ :(
I'll remove these in future.
>
> Do you use git send-email? How, maybe we can help you there.
>
> On Fri, Sep 12, 2014 at 10:34:40AM +0100, Martin Townsend wrote:
>> Currently there are a number of error paths in the lowpan_rcv function that
>> free the skb before returning, the patch simplifies the receive path by
>> ensuring that the skb is only freed from this function.
>>
>> Passing the skb from 6lowpan up to the higher layers is not a
>> function of IPHC. By moving it out of IPHC we also remove the
>> need to support error code returns with NET_RX codes.
>> It also makes the lowpan_rcv function more extendable as we
>> can support more compression schemes.
>>
>> With the above 2 lowpan_rcv is refacored so eliminate incorrect return
>> values.
>>
>> Signed-off-by: Martin Townsend <martin.towns...@xsilon.com>
>> ---
>> include/net/6lowpan.h | 4 +--
>> net/6lowpan/iphc.c | 73
>> ++++++++++++++++++-------------------------
>> net/bluetooth/6lowpan.c | 26 +++++++++------
>> net/ieee802154/6lowpan_rtnl.c | 44 +++++++++++++++-----------
>> 4 files changed, 75 insertions(+), 72 deletions(-)
>>
>> diff --git a/include/net/6lowpan.h b/include/net/6lowpan.h
>> index d184df1..450eaaf 100644
>> --- a/include/net/6lowpan.h
>> +++ b/include/net/6lowpan.h
>> @@ -374,10 +374,10 @@ lowpan_uncompress_size(const struct sk_buff *skb, u16
>> *dgram_offset)
>>
>> typedef int (*skb_delivery_cb)(struct sk_buff *skb, struct net_device *dev);
>>
>> -int lowpan_process_data(struct sk_buff *skb, struct net_device *dev,
>> +int lowpan_process_data(struct sk_buff **skb_inout, struct net_device *dev,
>> const u8 *saddr, const u8 saddr_type, const u8 saddr_len,
>> const u8 *daddr, const u8 daddr_type, const u8 daddr_len,
>> - u8 iphc0, u8 iphc1, skb_delivery_cb skb_deliver);
>> + u8 iphc0, u8 iphc1);
> check checkpatch here.
>
> CHECK: Alignment should match open parenthesis
> #37: FILE: include/net/6lowpan.h:378:
> +int lowpan_process_data(struct sk_buff **skb_inout, struct net_device *dev,
> const u8 *saddr, const u8 saddr_type, const u8 saddr_len,
This hasn't been introduced by me I've just removed skb_deliver.
>> int lowpan_header_compress(struct sk_buff *skb, struct net_device *dev,
>> unsigned short type, const void *_daddr,
>> const void *_saddr, unsigned int len);
>> diff --git a/net/6lowpan/iphc.c b/net/6lowpan/iphc.c
>> index 142eef5..43ed1b4 100644
>> --- a/net/6lowpan/iphc.c
>> +++ b/net/6lowpan/iphc.c
>> @@ -171,37 +171,6 @@ static int uncompress_context_based_src_addr(struct
>> sk_buff *skb,
>> return 0;
>> }
>>
>> -static int skb_deliver(struct sk_buff *skb, struct ipv6hdr *hdr,
>> - struct net_device *dev, skb_delivery_cb deliver_skb)
>> -{
>> - struct sk_buff *new;
>> - int stat;
>> -
>> - new = skb_copy_expand(skb, sizeof(struct ipv6hdr), skb_tailroom(skb),
>> - GFP_ATOMIC);
>> - kfree_skb(skb);
>> -
>> - if (!new)
>> - return -ENOMEM;
>> -
>> - skb_push(new, sizeof(struct ipv6hdr));
>> - skb_reset_network_header(new);
>> - skb_copy_to_linear_data(new, hdr, sizeof(struct ipv6hdr));
>> -
>> - new->protocol = htons(ETH_P_IPV6);
>> - new->pkt_type = PACKET_HOST;
>> - new->dev = dev;
>> -
>> - raw_dump_table(__func__, "raw skb data dump before receiving",
>> - new->data, new->len);
>> -
>> - stat = deliver_skb(new, dev);
>> -
>> - kfree_skb(new);
>> -
>> - return stat;
>> -}
>> -
>> /* Uncompress function for multicast destination address,
>> * when M bit is set.
>> */
>> @@ -332,14 +301,16 @@ err:
>> /* TTL uncompression values */
>> static const u8 lowpan_ttl_values[] = { 0, 1, 64, 255 };
>>
>> -int lowpan_process_data(struct sk_buff *skb, struct net_device *dev,
>> +int lowpan_process_data(struct sk_buff **skb_inout, struct net_device *dev,
>> const u8 *saddr, const u8 saddr_type, const u8
>> saddr_len,
>> const u8 *daddr, const u8 daddr_type, const u8
>> daddr_len,
>> - u8 iphc0, u8 iphc1, skb_delivery_cb deliver_skb)
>> + u8 iphc0, u8 iphc1)
>> {
>> struct ipv6hdr hdr = {};
>> u8 tmp, num_context = 0;
>> int err;
>> + int err_ret = -EINVAL;
> use err here, I saw this in your cover-letter as change but it's not
> really changed.
oops, don't know what happened here I did change it.
>
>> + struct sk_buff *skb = *skb_inout;
>>
>> raw_dump_table(__func__, "raw skb data dump uncompressed",
>> skb->data, skb->len);
>> @@ -460,7 +431,6 @@ int lowpan_process_data(struct sk_buff *skb, struct
>> net_device *dev,
>> /* UDP data uncompression */
>> if (iphc0 & LOWPAN_IPHC_NH_C) {
>> struct udphdr uh;
>> - struct sk_buff *new;
>>
>> if (uncompress_udp_header(skb, &uh))
>> goto drop;
>> @@ -468,14 +438,15 @@ int lowpan_process_data(struct sk_buff *skb, struct
>> net_device *dev,
>> /* replace the compressed UDP head by the uncompressed UDP
>> * header
>> */
>> - new = skb_copy_expand(skb, sizeof(struct udphdr),
>> + skb = skb_copy_expand(skb, sizeof(struct udphdr),
>> skb_tailroom(skb), GFP_ATOMIC);
>> - kfree_skb(skb);
>> -
>> - if (!new)
>> - return -ENOMEM;
>> + if (!skb) {
>> + err_ret = -ENOMEM;
>> + goto drop;
>> + }
>>
>> - skb = new;
>> + kfree_skb(*skb_inout);
>> + *skb_inout = skb;
>>
>> skb_push(skb, sizeof(struct udphdr));
>> skb_reset_transport_header(skb);
>> @@ -499,11 +470,27 @@ int lowpan_process_data(struct sk_buff *skb, struct
>> net_device *dev,
>>
>> raw_dump_table(__func__, "raw header dump", (u8 *)&hdr, sizeof(hdr));
>>
>> - return skb_deliver(skb, &hdr, dev, deliver_skb);
>> + /* Setup skb with new uncompressed IPv6 header. */
>> + skb = skb_copy_expand(skb, sizeof(hdr), skb_tailroom(skb),
>> + GFP_ATOMIC);
>> + if (!skb)
>> + return -ENOMEM;
>> +
>> + kfree_skb(*skb_inout);
>> + *skb_inout = skb;
>> +
>> + skb_push(skb, sizeof(hdr));
>> + skb_reset_network_header(skb);
>> + skb_copy_to_linear_data(skb, &hdr, sizeof(hdr));
>> + skb->dev = dev;
>> +
>> + raw_dump_table(__func__, "raw skb data dump before receiving",
>> + skb->data, skb->len);
>> +
>> + return 0;
>>
>> drop:
>> - kfree_skb(skb);
>> - return -EINVAL;
>> + return err_ret;
>> }
>> EXPORT_SYMBOL_GPL(lowpan_process_data);
>>
>> diff --git a/net/bluetooth/6lowpan.c b/net/bluetooth/6lowpan.c
>> index 206b65c..a4e340e 100644
>> --- a/net/bluetooth/6lowpan.c
>> +++ b/net/bluetooth/6lowpan.c
>> @@ -215,7 +215,7 @@ static int give_skb_to_upper(struct sk_buff *skb, struct
>> net_device *dev)
>> return ret;
>> }
>>
>> -static int process_data(struct sk_buff *skb, struct net_device *netdev,
>> +static int process_data(struct sk_buff **skb_inout, struct net_device
>> *netdev,
>> struct l2cap_chan *chan)
>> {
>> const u8 *saddr, *daddr;
>> @@ -223,6 +223,7 @@ static int process_data(struct sk_buff *skb, struct
>> net_device *netdev,
>> struct lowpan_dev *dev;
>> struct lowpan_peer *peer;
>> unsigned long flags;
>> + struct sk_buff *skb = *skb_inout;
>>
>> dev = lowpan_dev(netdev);
>>
>> @@ -245,13 +246,12 @@ static int process_data(struct sk_buff *skb, struct
>> net_device *netdev,
>> if (lowpan_fetch_skb_u8(skb, &iphc1))
>> goto drop;
>>
>> - return lowpan_process_data(skb, netdev,
>> + return lowpan_process_data(skb_inout, netdev,
>> saddr, IEEE802154_ADDR_LONG, EUI64_ADDR_LEN,
>> daddr, IEEE802154_ADDR_LONG, EUI64_ADDR_LEN,
>> - iphc0, iphc1, give_skb_to_upper);
>> + iphc0, iphc1);
>>
>> drop:
>> - kfree_skb(skb);
>> return -EINVAL;
>> }
>>
>> @@ -280,9 +280,6 @@ static int recv_pkt(struct sk_buff *skb, struct
>> net_device *dev,
>> local_skb->protocol = htons(ETH_P_IPV6);
>> local_skb->pkt_type = PACKET_HOST;
>>
>> - skb_reset_network_header(local_skb);
>> - skb_set_transport_header(local_skb, sizeof(struct ipv6hdr));
>> -
>> if (give_skb_to_upper(local_skb, dev) != NET_RX_SUCCESS) {
>> kfree_skb(local_skb);
>> goto drop;
>> @@ -300,9 +297,20 @@ static int recv_pkt(struct sk_buff *skb, struct
>> net_device *dev,
>> if (!local_skb)
>> goto drop;
>>
>> - ret = process_data(local_skb, dev, chan);
>> - if (ret != NET_RX_SUCCESS)
>> + ret = process_data(&local_skb, dev, chan);
>> + if (ret < 0) {
>> + kfree_skb(local_skb);
>> goto drop;
>> + }
>> +
>> + local_skb->protocol = htons(ETH_P_IPV6);
>> + local_skb->pkt_type = PACKET_HOST;
>> +
>> + if (give_skb_to_upper(local_skb, dev)
>> + != NET_RX_SUCCESS) {
>> + kfree_skb(local_skb);
>> + goto drop;
>> + }
>>
>> dev->stats.rx_bytes += skb->len;
>> dev->stats.rx_packets++;
>> diff --git a/net/ieee802154/6lowpan_rtnl.c b/net/ieee802154/6lowpan_rtnl.c
>> index 6591d27..d5bdeba 100644
>> --- a/net/ieee802154/6lowpan_rtnl.c
>> +++ b/net/ieee802154/6lowpan_rtnl.c
>> @@ -167,11 +167,13 @@ static int lowpan_give_skb_to_devices(struct sk_buff
>> *skb,
>> return stat;
>> }
>>
>> -static int process_data(struct sk_buff *skb, const struct ieee802154_hdr
>> *hdr)
>> +static int process_data(struct sk_buff **skb_inout,
>> + const struct ieee802154_hdr *hdr)
>> {
>> u8 iphc0, iphc1;
>> struct ieee802154_addr_sa sa, da;
>> void *sap, *dap;
>> + struct sk_buff *skb = *skb_inout;
>>
>> raw_dump_table(__func__, "raw skb data dump", skb->data, skb->len);
>> /* at least two bytes will be used for the encoding */
>> @@ -197,13 +199,11 @@ static int process_data(struct sk_buff *skb, const
>> struct ieee802154_hdr *hdr)
>> else
>> dap = &da.hwaddr;
>>
>> - return lowpan_process_data(skb, skb->dev, sap, sa.addr_type,
>> + return lowpan_process_data(skb_inout, skb->dev, sap, sa.addr_type,
>> IEEE802154_ADDR_LEN, dap, da.addr_type,
>> - IEEE802154_ADDR_LEN, iphc0, iphc1,
>> - lowpan_give_skb_to_devices);
>> + IEEE802154_ADDR_LEN, iphc0, iphc1);
>>
>> drop:
>> - kfree_skb(skb);
>> return -EINVAL;
>> }
>>
>> @@ -478,36 +478,35 @@ static int lowpan_rcv(struct sk_buff *skb, struct
>> net_device *dev,
>>
>> /* check that it's our buffer */
>> if (skb->data[0] == LOWPAN_DISPATCH_IPV6) {
>> - skb->protocol = htons(ETH_P_IPV6);
>> - skb->pkt_type = PACKET_HOST;
>> -
>> /* Pull off the 1-byte of 6lowpan header. */
>> skb_pull(skb, 1);
>>
>> - ret = lowpan_give_skb_to_devices(skb, NULL);
>> - if (ret == NET_RX_DROP)
>> - goto drop;
>> + ret = NET_RX_SUCCESS;
>> } else {
>> switch (skb->data[0] & 0xe0) {
>> case LOWPAN_DISPATCH_IPHC: /* ipv6 datagram */
>> - ret = process_data(skb, &hdr);
>> - if (ret == NET_RX_DROP)
>> + ret = process_data(&skb, &hdr);
>> + if (ret < 0)
>> goto drop;
>> break;
>> case LOWPAN_DISPATCH_FRAG1: /* first fragment header */
>> ret = lowpan_frag_rcv(skb, LOWPAN_DISPATCH_FRAG1);
> can also return "-1" for error but in this case the skb is already freed.
> so some else if with NET_RX_DROP. I know it was not handled before but we
> should handle this right now, when we care about the error handling.
Agreed, will add.
>
>> if (ret == 1) {
>> - ret = process_data(skb, &hdr);
>> - if (ret == NET_RX_DROP)
>> + ret = process_data(&skb, &hdr);
>> + if (ret < 0)
>> goto drop;
> this function returning an errno, you can't return the errno here. goto
> drop returns the ret variable. Maybe just make a return NET_RX_DROP at
> drop. We should never return a different variable.
It won't, the drop label will return NET_RX_DROP.
>
> Also this need to be drop_skb at several places in this code, we don't
> have a kfree_skb at process_data anymore. This leaks memory.
Yep, I think these have been lost in my merge to bluetooth tree :(
>
>> + } else {
>> + return NET_RX_SUCCESS;
>> }
>> break;
>> case LOWPAN_DISPATCH_FRAGN: /* next fragments headers */
>> ret = lowpan_frag_rcv(skb, LOWPAN_DISPATCH_FRAGN);
> same here.
>> if (ret == 1) {
>> - ret = process_data(skb, &hdr);
>> - if (ret == NET_RX_DROP)
>> + ret = process_data(&skb, &hdr);
>> + if (ret < 0)
>> goto drop;
> same here.
>
>> + } else {
>> + return NET_RX_SUCCESS;
>> }
>> break;
>> default:
>> @@ -515,7 +514,16 @@ static int lowpan_rcv(struct sk_buff *skb, struct
>> net_device *dev,
>> }
>> }
>>
>> - return NET_RX_SUCCESS;
>> + /* Pass IPv6 packet up to next layer */
>> + skb->protocol = htons(ETH_P_IPV6);
>> + skb->pkt_type = PACKET_HOST;
>> + ret = lowpan_give_skb_to_devices(skb, NULL);
> grml, see possible merge conflicts here. In next should be no dev
> parameter anymore. Nevertheless should easy to fix it.
>
>> + if (ret < 0)
>> + goto drop_skb;
>> +
> Also here that's too broken here. In lowpan_give_skb_to_devices we have
> mixed errno and NET_RX_SUCCESS for the return variable, we need to
> clean this up. Maybe just return the NET_RX_SUCCESS|NET_RX_DROP return
> value from netif_rx call.
ok, shall i just do a
return lowpan_give_skb_to_devices(skb);
and then add the code from freeing or consuming the skb in
lowpan_give_skb_to_devices?
>> + kfree_skb(skb);
> consume_skb here.
ok
>
> Simple on error kfree_skb, not a error consume_skb or dev_kfree_skb. I
> prefer consume_skb.
>
> - Alex
> --
> To unsubscribe from this list: send the line "unsubscribe linux-wpan" in
> the body of a message to majord...@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
- Martin.
------------------------------------------------------------------------------
Want excitement?
Manually upgrade your production database.
When you want reliability, choose Perforce
Perforce version control. Predictably reliable.
http://pubads.g.doubleclick.net/gampad/clk?id=157508191&iu=/4140/ostg.clktrk
_______________________________________________
Linux-zigbee-devel mailing list
Linux-zigbee-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/linux-zigbee-devel
