Hello, J'ai depuis hier soir un pb avec xdm lance au run level 5, encore jamais eu de pb depuis 1 an,
c'est bizarre car en relancant XConfigurator apres chaque redemarrage et en lancant startx manuellement ca passe... j'ai bien verifie que ce n'est pas /etc/X11/XF86Config qui merdouille car j'ai garde une copie, donc ca doit autre chose qui est modifie par Xconfigurator (un lien, un .so, une lib ???), qqn peut m'aider ??? Il ya t-il un fichier particulier qui a ete nicke par fsck, fichier important pour X11, Quel peut-etre le rpm a reinstaller pour reparer ca ??? (si possible pour eviter la reinstall complete !!!) je cite le bug : XFree86 Version 3.3.5 / X Window System (protocol Version 11, revision 0, vendor release 6300) Release Date: August 23 1999 If the server is older than 6-12 months, or if your card is newer than the above date, look for a newer version before reporting problems. (see http://www.XFree86.Org/FAQ) Operating System: Linux 2.2.5-22smp i686 [ELF] Configured drivers: SVGA: server for SVGA graphics adaptors (Patchlevel 0): NV1, STG2000, RIVA 128, RIVA TNT, RIVA TNT2, RIVA ULTRA TNT2, RIVA VANTA, RIVA ULTRA VANTA, RIVA INTEGRATED, ET4000, ET4000W32, ET4000W32i, ET4000W32i_rev_b, ET4000W32i_rev_c, ET4000W32p, ET4000W32p_rev_a, ET4000W32p_rev_b, ET4000W32p_rev_c, ET4000W32p_rev_d, ET6000, ET6100, et3000, pvga1, wd90c00, wd90c10, wd90c30, wd90c24, wd90c31, wd90c33, gvga, ati, sis86c201, sis86c202, sis86c205, sis86c215, sis86c225, sis5597, sis5598, sis6326, sis530, sis620, tvga8200lx, tvga8800cs, tvga8900b, tvga8900c, tvga8900cl, tvga8900d, tvga9000, tvga9000i, tvga9100b, tvga9200cxr, tgui9400cxi, tgui9420, tgui9420dgi, tgui9430dgi, tgui9440agi, cyber9320, tgui9660, tgui9680, tgui9682, tgui9685, cyber9382, cyber9385, cyber9388, cyber9397, cyber9520, cyber9525, 3dimage975, 3dimage985, cyber9397dvd, blade3d, cyberblade, clgd5420, clgd5422, clgd5424, clgd5426, clgd5428, clgd5429, clgd5430, clgd5434, clgd5436, clgd5446, clgd5480, clgd5462, clgd5464, clgd5465, clgd6205, clgd6215, clgd6225, clgd6235, clgd7541, clgd7542, clgd7543, clgd7548, clgd7555, clgd7556, ncr77c22, ncr77c22e, cpq_avga, mga2064w, mga1064sg, mga2164w, mga2164w AGP, mgag200, mgag100, mgag400, oti067, oti077, oti087, oti037c, al2101, ali2228, ali2301, ali2302, ali2308, ali2401, cl6410, cl6412, cl6420, cl6440, video7, ark1000vl, ark1000pv, ark2000pv, ark2000mt, mx, realtek, s3_savage, s3_virge, AP6422, AT24, AT3D, s3_svga, NM2070, NM2090, NM2093, NM2097, NM2160, NM2200, ct65520, ct65525, ct65530, ct65535, ct65540, ct65545, ct65546, ct65548, ct65550, ct65554, ct65555, ct68554, ct69000, ct64200, ct64300, mediagx, V1000, V2100, V2200, p9100, spc8110, i740, i740_pci, Voodoo Banshee, Voodoo3, generic (using VT number 7) XF86Config: /usr/X11R6/lib/X11/XF86Config (**) stands for supplied, (--) stands for probed/default values (**) XKB: keycodes: "xfree86" (**) XKB: types: "default" (**) XKB: compat: "default" (**) XKB: symbols: "us(pc101)" (**) XKB: geometry: "pc" (**) XKB: rules: "xfree86" (**) XKB: model: "pc101" (**) XKB: layout: "fr" (**) Mouse: type: MouseManPlusPS/2, device: /dev/mouse, buttons: 5 (**) Mouse: zaxismapping: (-)4 (+)5 (**) SVGA: Graphics device ID: "Matrox|MGA 2164W [Millennium II] AGP" (**) SVGA: Monitor ID: "CTX 2085" (--) SVGA: Mode "1600x1200" needs hsync freq of 87.50 kHz. Deleted. (--) SVGA: Mode "1152x864" needs hsync freq of 89.62 kHz. Deleted. (--) SVGA: Mode "1280x1024" needs hsync freq of 91.15 kHz. Deleted. (--) SVGA: Mode "1600x1200" needs hsync freq of 93.75 kHz. Deleted. (--) SVGA: Mode "1600x1200" needs hsync freq of 105.77 kHz. Deleted. (--) SVGA: Mode "1280x1024" needs hsync freq of 107.16 kHz. Deleted. (--) SVGA: Mode "1800X1440" needs hsync freq of 96.15 kHz. Deleted. (--) SVGA: Mode "1800X1440" needs hsync freq of 104.52 kHz. Deleted. (**) FontPath set to "unix/:-1" (--) SVGA: PCI: Matrox MGA 2164W AGP rev 0, Memory @ 0xe6000000, 0xe0000000 (--) SVGA: Linear framebuffer at 0xE6000000 (--) SVGA: MMIO registers at 0xE0000000 (--) SVGA: Video BIOS info block at 0x000c7dc0 (--) SVGA: Found and verified enhanced Video BIOS info block (!!) SVGA: Unable to probe for video memory size. Assuming 4 Meg. Please specify the correct amount in the XF86Config file. See the file README.MGA for details. (--) SVGA: chipset: mga2164w AGP (--) SVGA: videoram: 4096k (**) SVGA: Option "dac_8_bit" (**) SVGA: Using 16 bpp, Depth 16, Color weight: 565 (--) SVGA: Maximum allowed dot-clock: 250.000 MHz (**) SVGA: Mode "1600x1200": mode clock = 162.000 (--) SVGA: Virtual resolution set to 1600x1200 (--) SVGA: SpeedUp code selection modified because virtualX != 1024 (--) SVGA: MCLK set to 66.000 MHz (--) SVGA: Using hardware cursor (--) SVGA: Using XAA (XFree86 Acceleration Architecture) (--) SVGA: XAA: Solid filled rectangles (--) SVGA: XAA: Screen-to-screen copy (--) SVGA: XAA: 8x8 color expand pattern fill (--) SVGA: XAA: CPU to screen color expansion (TE/NonTE imagetext, TE/NonTE polytext) (--) SVGA: XAA: Using 12 128x110 areas for pixmap caching (--) SVGA: XAA: Caching tiles and stipples (--) SVGA: XAA: General lines and segments (--) SVGA: XAA: Dashed lines and segments _FontTransSocketUNIXConnect: Can't connect: errno = 111 failed to set default font path 'unix/:-1' Fatal server error: could not open default font 'fixed' When reporting a problem related to a server crash, please send the full server output, not just the last messages X connection to :0.0 broken (explicit kill or server shutdown). Merci d'avance pour une aide rapide et claire Best Regards, Jeremy Fierstone