Mike:
Sorry, I use the same account in two locations, so your most recent msgs are
of course at the location that I am not at presently.
I ran another test, this time with the '400 administrator present! I
checked the lpq-Plinuxoptra and there were no entries.
What we're getting from the AS400 qsysopr msgs, is a 'hardware failure', the
details of which show error code 6140, the linuxopts2 device goes
immediately active, writer shows active and then in the handshake process
fails somehow on the above error msg. The printer does work locally within
Linux OS...so I'm wondering if you have any suggestions.
----- Original Message -----
From: Mike Madore <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>
Sent: Tuesday, April 18, 2000 11:09 AM
Subject: Re: Help with TN5250 Printing
> Hi,
>
> > If you can re-direct me back to a remote outq, and a valid command line
> > format for TN5250 printer session, we'll be happy to go back and try the
new
> > suggestions. Problem is, we have too many variables now, ie. proper
> > configuration of the AS400 side, proper printer configuration on the
LInux /
> > printer side, command line variables fluctuation. For example the -p
doesn't
> > work but is shown in the examples as being the 'printer session'
designator,
> > however the -P does work. The -T is not shown in example, and the only
> > command following -P illustrated is scs2ascii | lpr -Pprintername.
>
> The command line I posted earlier should work. As long as you have the
> correct PTFs on the AS/400, and have auto device configuration turned on,
> you shouldn't have to do any other configuration of the AS/400.
>
> Mike
>
> +---
> | This is the LINUX5250 Mailing List!
> | To submit a new message, send your mail to [EMAIL PROTECTED]
> | To subscribe to this list send email to [EMAIL PROTECTED]
> | To unsubscribe from this list send email to
[EMAIL PROTECTED]
> | Questions should be directed to the list owner/operator:
[EMAIL PROTECTED]
> +---
>
+---
| This is the LINUX5250 Mailing List!
| To submit a new message, send your mail to [EMAIL PROTECTED]
| To subscribe to this list send email to [EMAIL PROTECTED]
| To unsubscribe from this list send email to [EMAIL PROTECTED]
| Questions should be directed to the list owner/operator: [EMAIL PROTECTED]
+---
