Holas.
      Resulta que se utiliza el Escritor de openoffice, pero de repente, cuando
se intenta guardar el archivo, este se cierra, perdiendo el documento (pasa casi
nunca, pero pasa).
      ¿Hay forma de volver a abrir openoffice writer y recuperar el archivo,
aunque este no haya sido guardado?, o bien, si el archivo ya estaba guardado,
¿recuperar los últimos cambios realizados?.
    Muchas gracias

----------------------------------------------------------------
This message was sent using IMP, the Internet Messaging Program.
From [EMAIL PROTECTED]  Tue Aug 31 13:30:11 2004
From: [EMAIL PROTECTED] (=?iso-8859-1?q?juan=20pablo=20Rumie=20Vittar?=)
Date: Tue Aug 31 13:30:27 2004
Subject: Problema con reliquia, (que da muchas satisfaciones)
In-Reply-To: <[EMAIL PROTECTED]>
Message-ID: <[EMAIL PROTECTED]>

>>      Driver not found
>>      =(

>corrijo: 

>(EE) Failed to load module "generic" 
>(module does not exist, 0)
>[...]
>(EE) No drivers aviables

Al archivo /etc/X11/XF86Config lo tengo asi:

[...]

Section "Monitor"

    Identifier  "My Monitor"
    VendorName  "Unknown"
    ModelName   "Unknown"
[...]
    HorizSync   31.5 
[...]
VertRefresh 50-70

# 640x400 @ 70 Hz, 31.5 kHz hsync
Modeline "640x400"     25.175 640  664  760  800   400
 409  411  450
# 640x480 @ 60 Hz, 31.5 kHz hsync
Modeline "640x480"     25.175 640  664  760  800   480
 491  493  525
# 800x600 @ 56 Hz, 35.15 kHz hsync
ModeLine "800x600"     36     800  824  896 1024   600
 601  603  625
# 1024x768 @ 87 Hz interlaced, 35.5 kHz hsync
Modeline "1024x768"    44.9  1024 1048 1208 1264   768
 776  784  817 Interlace

# 640x400 @ 85 Hz, 37.86 kHz hsync
Modeline "640x400"     31.5   640  672 736   832   400
 401  404  445 -HSync +VSync
# 640x480 @ 72 Hz, 36.5 kHz hsync
Modeline "640x480"     31.5   640  680  720  864   480
 488  491  521
# 640x480 @ 75 Hz, 37.50 kHz hsync
ModeLine  "640x480"    31.5   640  656  720  840   480
 481  484  500 -HSync -VSync
# 800x600 @ 60 Hz, 37.8 kHz hsync
Modeline "800x600"     40     800  840  968 1056   600
 601  605  628 +hsync +vsync

# 640x480 @ 85 Hz, 43.27 kHz hsync
Modeline "640x480"     36     640  696  752  832   480
 481  484  509 -HSync -VSync
# 1152x864 @ 89 Hz interlaced, 44 kHz hsync
ModeLine "1152x864"    65    1152 1168 1384 1480   864
 865  875  985 Interlace

# 800x600 @ 72 Hz, 48.0 kHz hsync
Modeline "800x600"     50     800  856  976 1040   600
 637  643  666 +hsync +vsync
# 1024x768 @ 60 Hz, 48.4 kHz hsync
Modeline "1024x768"    65    1024 1032 1176 1344   768
 771  777  806 -hsync -vsync

# 640x480 @ 100 Hz, 53.01 kHz hsync
Modeline "640x480"     45.8   640  672  768  864   480
 488  494  530 -HSync -VSync
# 1152x864 @ 60 Hz, 53.5 kHz hsync
Modeline  "1152x864"   89.9  1152 1216 1472 1680   864
 868  876  892 -HSync -VSync
# 800x600 @ 85 Hz, 55.84 kHz hsync
Modeline  "800x600"    60.75  800  864  928 1088   600
 616  621  657 -HSync -VSync

# 1024x768 @ 70 Hz, 56.5 kHz hsync
Modeline "1024x768"    75    1024 1048 1184 1328   768
 771  777  806 -hsync -vsync
# 1280x1024 @ 87 Hz interlaced, 51 kHz hsync
Modeline "1280x1024"   80    1280 1296 1512 1568  1024
1025 1037 1165 Interlace

# 800x600 @ 100 Hz, 64.02 kHz hsync
Modeline  "800x600"    69.65  800  864  928 1088   600
 604  610  640 -HSync -VSync
# 1024x768 @ 76 Hz, 62.5 kHz hsync
Modeline "1024x768"    85    1024 1032 1152 1360   768
 784  787  823
# 1152x864 @ 70 Hz, 62.4 kHz hsync
Modeline  "1152x864"   92    1152 1208 1368 1474   864
 865  875  895
# 1280x1024 @ 61 Hz, 64.2 kHz hsync
Modeline "1280x1024"  110    1280 1328 1512 1712  1024
1025 1028 1054

# 1024x768 @ 85 Hz, 70.24 kHz hsync
Modeline "1024x768"   98.9  1024 1056 1216 1408   768
782 788 822 -HSync -VSync
# 1152x864 @ 78 Hz, 70.8 kHz hsync
Modeline "1152x864"   110   1152 1240 1324 1552   864 
864  876  908

# 1280x1024 @ 70 Hz, 74.59 kHz hsync
Modeline "1280x1024"  126.5 1280 1312 1472 1696  1024
1032 1040 1068 -HSync -VSync
# 1600x1200 @ 60Hz, 75.00 kHz hsync
Modeline "1600x1200"  162   1600 1664 1856 2160  1200
1201 1204 1250 +HSync +VSync
# 1152x864 @ 84 Hz, 76.0 kHz hsync
Modeline "1152x864"   135    1152 1464 1592 1776   864
 864  876  908

# 1280x1024 @ 74 Hz, 78.85 kHz hsync
Modeline "1280x1024"  135    1280 1312 1456 1712  1024
1027 1030 1064

# 1024x768 @ 100Hz, 80.21 kHz hsync
Modeline "1024x768"   115.5  1024 1056 1248 1440  768 
771  781  802 -HSync -VSync
# 1280x1024 @ 76 Hz, 81.13 kHz hsync
Modeline "1280x1024"  135    1280 1312 1416 1664  1024
1027 1030 1064

# 1600x1200 @ 70 Hz, 87.50 kHz hsync
Modeline "1600x1200"  189    1600 1664 1856 2160  1200
1201 1204 1250 -HSync -VSync
# 1152x864 @ 100 Hz, 89.62 kHz hsync
Modeline "1152x864"   137.65 1152 1184 1312 1536   864
 866  885  902 -HSync -VSync
# 1280x1024 @ 85 Hz, 91.15 kHz hsync
Modeline "1280x1024"  157.5  1280 1344 1504 1728  1024
1025 1028 1072 +HSync +VSync
# 1600x1200 @ 75 Hz, 93.75 kHz hsync
Modeline "1600x1200"  202.5  1600 1664 1856 2160  1200
1201 1204 1250 +HSync +VSync
# 1600x1200 @ 85 Hz, 105.77 kHz hsync
Modeline "1600x1200"  220    1600 1616 1808 2080  1200
1204 1207 1244 +HSync +VSync
# 1280x1024 @ 100 Hz, 107.16 kHz hsync
Modeline "1280x1024"  181.75 1280 1312 1440 1696  1024
1031 1046 1072 -HSync -VSync

# 1800x1440 @ 64Hz, 96.15 kHz hsync 
ModeLine "1800X1440"  230    1800 1896 2088 2392 1440
1441 1444 1490 +HSync +VSync
# 1800x1440 @ 70Hz, 104.52 kHz hsync 
ModeLine "1800X1440"  250    1800 1896 2088 2392 1440
1441 1444 1490 +HSync +VSync

# 512x384 @ 78 Hz, 31.50 kHz hsync
Modeline "512x384"    20.160 512  528  592  640   384 
385  388  404 -HSync -VSync
# 512x384 @ 85 Hz, 34.38 kHz hsync
Modeline "512x384"    22     512  528  592  640   384 
385  388  404 -HSync -VSync

# Low-res Doublescan modes
# If your chipset does not support doublescan, you get
a 'squashed'
# resolution like 320x400.

# 320x200 @ 70 Hz, 31.5 kHz hsync, 8:5 aspect ratio
Modeline "320x200"     12.588 320  336  384  400   200
 204  205  225 Doublescan
# 320x240 @ 60 Hz, 31.5 kHz hsync, 4:3 aspect ratio
Modeline "320x240"     12.588 320  336  384  400   240
 245  246  262 Doublescan
# 320x240 @ 72 Hz, 36.5 kHz hsync
Modeline "320x240"     15.750 320  336  384  400   240
 244  246  262 Doublescan
# 400x300 @ 56 Hz, 35.2 kHz hsync, 4:3 aspect ratio
ModeLine "400x300"     18     400  416  448  512   300
 301  302  312 Doublescan
# 400x300 @ 60 Hz, 37.8 kHz hsync
Modeline "400x300"     20     400  416  480  528   300
 301  303  314 Doublescan
# 400x300 @ 72 Hz, 48.0 kHz hsync
Modeline "400x300"     25     400  424  488  520   300
 319  322  333 Doublescan
# 480x300 @ 56 Hz, 35.2 kHz hsync, 8:5 aspect ratio
ModeLine "480x300"     21.656 480  496  536  616   300
 301  302  312 Doublescan
# 480x300 @ 60 Hz, 37.8 kHz hsync
Modeline "480x300"     23.890 480  496  576  632   300
 301  303  314 Doublescan
# 480x300 @ 63 Hz, 39.6 kHz hsync
Modeline "480x300"     25     480  496  576  632   300
 301  303  314 Doublescan
# 480x300 @ 72 Hz, 48.0 kHz hsync
Modeline "480x300"     29.952 480  504  584  624   300
 319  322  333 Doublescan

EndSection

[...]

Section "Device"
    Identifier  "Generic VGA"
    VendorName  "Unknown"
    BoardName   "Unknown"
    Chipset     "generic"


Section "Device"
    Identifier  "My Video Card"
    VendorName  "Unknown"
    BoardName   "Unknown"
    #VideoRam    256
Clocks  25.20  28.32  35.68  65.14 -->IMPORTANTE!
EndSection

[...]

#
**********************************************************************
# Screen sections
#
**********************************************************************

# The Colour SVGA server

Section "Screen"
    Driver      "svga"
    Device      "Generic VGA"
    #Device      "(null)"
    Monitor     "My Monitor"
    Subsection "Display"
        Depth       16
        #Modes       "640x480"
        ViewPort    0 0
    EndSubsection
EndSection

# The 16-color VGA server

Section "Screen"
    Driver      "vga16"
    Device      "My Video Card"
    Monitor     "My Monitor"
    Subsection "Display"
        Modes       "640x480" "800x600"
        ViewPort    0 0
    EndSubsection
EndSection

# The Mono server

Section "Screen"
    Driver      "vga2"
    Device      "My Video Card"
    Monitor     "My Monitor"
    Subsection "Display"
        Modes       "640x480" "800x600"
        ViewPort    0 0
    EndSubsection
EndSection

# The accelerated servers (S3, Mach32, Mach8, 8514,
P9000, AGX, W32, Mach64)

Section "Screen"
    Driver      "accel"
    Device      "My Video Card"
    Monitor     "My Monitor"
    Subsection "Display"
        Depth       8
        Modes       "640x480"
        ViewPort    0 0
    EndSubsection
    Subsection "Display"
        Depth       16
        Modes       "640x480"
        ViewPort    0 0
    EndSubsection
    Subsection "Display"
        Depth       24
        Modes       "640x480"
        ViewPort    0 0
    EndSubsection
    Subsection "Display"
        Depth       32
        Modes       "640x480"
        ViewPort    0 0
    EndSubsection
EndSection

FIN

>PD. q version de X corriste?

>esta es la 4.1, al parecer 
>es muy nueva

La version es xfree86-common 4.1.0-16woody1

disculpa si es largo y espero que te sirva!

saludos

=====
"De la misma forma que el hombre no finaliza nunca su etapa de aprendizaje, la 
informatica en su mas amplio contexto no finaliza nunca su etapa de evolucion"


        
        
                
___________________________________________________________
100mb gratis, Antivirus y Antispam
Correo Yahoo!, el mejor correo web del mundo
http://correo.yahoo.com.ar
From [EMAIL PROTECTED]  Tue Aug 31 13:57:07 2004
From: [EMAIL PROTECTED] (=?iso-8859-1?q?sandro=20romero?=)
Date: Tue Aug 31 13:57:17 2004
Subject: Sin configuara el dovecot
Message-ID: <[EMAIL PROTECTED]>

que pena con ustedes pero soy medio novato en Linux,
no e podido configura el dovecot, le e cambiado la
linea 14 con lo que me han sugerido, luego reicio
el,servicio pero los usuarios de correo no se me
loguean por el cliente eudora o ootlook me dice que
falla el protocolo pop3, alguien por favor que me
indique que es exactamente lo que se le configura, que
se le coloca y en que linea..
estoy urgido ****o sera que me tocara pasarme para
redhat9****

agradecido.


        
        
                
___________________________________________________________
100mb gratis, Antivirus y Antispam
Correo Yahoo!, el mejor correo web del mundo
http://correo.yahoo.com.ar
From [EMAIL PROTECTED]  Tue Aug 31 13:57:28 2004
From: [EMAIL PROTECTED] (Eduardo Quiroz Salinas)
Date: Tue Aug 31 13:57:44 2004
Subject: problemas con booteo
In-Reply-To: <[EMAIL PROTECTED]>
References: <[EMAIL PROTECTED]>
Message-ID: <[EMAIL PROTECTED]>

Hola a todos

tengo un problema con mi FC 2. Hice una particion nueva en otro disco que le 
puse a mi pc con el 
partition y luego saque dicho disco, pero no me arrancó más ni el guin ni FC. 
Entonces hice lo 
clásico, formatee el MBR con FDISK /MBR y ahi arrancó el guindoze, luego inicie 
con el disco de 
rescate de fedora rehabilité el grub, pero me arroja error 19 cuando arranca el 
grub. Ni siquiera me 
da la opción de elegir con que arrancar. Luego vuelvo a formatear el MBR y 
arranca bien el guin. 
Como puedo solucionar eso...no quiero reinstalar FC 2. Tengo el disco con LBR y 
no tengo el clásico 
problema del win xp con FC 2.

-- 
Linux user number 344659

"...Los que no requieren de un dios para ser virtuosos,
son la desesperacion de los creyentes..."

-------------------------------
Eduardo Quiroz Salinas
09-5149349
[EMAIL PROTECTED]
-------------------------------

Responder a