El 'atao' es NetworkManager: #!/bin/bash
ATAO=NetworkManager service $ATAO stop ; chkconfig --level 35 $ATAO off service netwok restart echo happy ; logout -eof- 2016-07-07 17:59 GMT-04:00 Luis Enrique Araneda <leacb...@gmail.com>: > Amigos, con esta les hago un queque! > > Le configuré la ip correspondiente a este tarro y me arroja este error: > > [root@mail network-scripts]# service network restart > Shutting down interface Auto_eth0: Device state: 3 (disconnected) > [ OK ] > Shutting down interface eth1: Error: Device 'eth1' > (/org/freedesktop/NetworkManager/Devices/1) disconnecting failed: This > device is not active > [FAILED] > Shutting down loopback interface: [ OK ] > Bringing up loopback interface: [ OK ] > Bringing up interface Auto_eth0: Active connection state: activated > Active connection path: /org/freedesktop/NetworkManager/ActiveConnection/1 > [ OK ] > > la config esta bien...!!! cual será el atao? > > > Auto_eth0 Link encap:Ethernet HWaddr 00:15:60:0E:FF:A4 > inet addr:10.198.3.7 Bcast:10.198.3.127 Mask:255.255.255.128 > inet6 addr: fe80::215:60ff:fe0e:ffa4/64 Scope:Link > UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 > RX packets:4565 errors:0 dropped:0 overruns:0 frame:0 > TX packets:6853 errors:0 dropped:0 overruns:0 carrier:0 > collisions:0 txqueuelen:1000 > RX bytes:382184 (373.2 KiB) TX bytes:6539263 (6.2 MiB) > Interrupt:25 > > eth1 Link encap:Ethernet HWaddr 00:15:60:0E:FF:A3 > inet6 addr: fe80::215:60ff:fe0e:ffa3/64 Scope:Link > UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 > RX packets:605 errors:0 dropped:0 overruns:0 frame:0 > TX packets:6 errors:0 dropped:0 overruns:0 carrier:0 > collisions:0 txqueuelen:1000 > RX bytes:48642 (47.5 KiB) TX bytes:492 (492.0 b) > Interrupt:26 > > > -- > Luis Enrique Araneda > -- barbud...@gmail.com