Bonjour � ceux qui sont toujours l�,
D�but juin j'avais demand� conseil pour lier 2 PC afin de
n'utiliser que 1 �cran, 1 clavier, une souris.
Suivant les conseils j'ai install�:
1 carte fast 10-100Mbps pci Ethernet ds chaque machine.
2 un cable RJ-45 twisted pair crossed cat:5 les reliant.
Au boot, la SuSE 8.1 a reconnu les cartes.
Mais apr�s pour atteindre l'autre PC je ne sais pas.
J'entrave que dalle, � tous les HOW-TO, readme, man, ...
Je joins en attach� divers test et fichiers de config.
Si quelqu'un pouvait me donner un petit coup ... de main.
Merci
J-C H.
--
---------------------
Jean-Claude Hendrickx
* Linux user *
---------------------
* contenu de /etc/hosts :
127.0.0.1 localhost
# special IPv6 addresses
::1 localhost ipv6-localhost ipv6-loopback
fe00::0 ipv6-localnet
ff00::0 ipv6-mcastprefix
ff02::1 ipv6-allnodes
ff02::2 ipv6-allrouters
ff02::3 ipv6-allhosts
127.0.0.2 linux.local linux
~
* cmde ifconfig ->
eth0 Link encap:Ethernet HWaddr 00:50:BF:98:94:9A
inet6 addr: fe80::250:bfff:fe98:949a/10 Scope:Link
UP BROADCAST NOTRAILERS RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:85 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:100
RX bytes:0 (0.0 b) TX bytes:48078 (46.9 Kb)
Interrupt:9 Base address:0xa400
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:104 errors:0 dropped:0 overruns:0 frame:0
TX packets:104 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:7604 (7.4 Kb) TX bytes:7604 (7.4 Kb)
* cmde cat /proc/interrupts ->
CPU0
0: 299080 XT-PIC timer
1: 553 XT-PIC keyboard
2: 0 XT-PIC cascade
5: 933 XT-PIC usb-uhci, CMI8738-MC6
8: 2 XT-PIC rtc
9: 50 XT-PIC acpi, ehci-hcd
10: 0 XT-PIC usb-uhci
11: 0 XT-PIC usb-uhci
12: 35522 XT-PIC PS/2 Mouse
14: 12063 XT-PIC ide0
15: 144 XT-PIC ide1
NMI: 0
LOC: 0
ERR: 0
MIS: 0
* cmd cat /proc/net/dev ->
Inter-| Receive
face |bytes packets errs drop fifo frame compressed multicast
lo: 7760 106 0 0 0 0 0 0
eth0: 0 0 0 0 0 0 0 0
sit0: 0 0 0 0 0 0 0 0
| Transmit
|bytes packets errs drop fifo colls carrier compressed
7760 106 0 0 0 0 0 0
6778 15 11 0 0 0 22 0
0 0 0 0 0 0 0 0
* extraits de /var/log/messages ->
Jul 5 14:24:59 linux kernel: eth0: ADMtek Comet rev 17 at 0xa400,
00:50:BF:98:94:9A, IRQ 9.
Jul 5 14:25:07 linux /etc/hotplug/net.agent[1357]: No HW description found
... exiting
Jul 5 14:25:10 linux kernel: eth0: no IPv6 routers present
jui 5 14:25:15 linux ifup: Configuration 'ppp0' has STARTMODE=manual: ->
skipped
Jul 7 08:10:35 linux kernel: eth0: no IPv6 routers present
Jul 7 09:27:55 linux kernel: eth0: ADMtek Comet rev 17 at 0xa400,
00:50:BF:98:94:9A, IRQ 9.
* extrait de cmd dmesg ->
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 4096 buckets, 32Kbytes
TCP: Hash tables configured (established 32768 bind 65536)
Linux IP multicast router 0.06 plus PIM-SM
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
...
Linux Tulip driver version 0.9.15-pre11 (May 11, 2002)
PCI: Enabling device 02:0b.0 (0014 -> 0017)
PCI: Assigned IRQ 9 for device 02:0b.0
PCI: Sharing IRQ 9 with 00:1d.7
eth0: ADMtek Comet rev 17 at 0xa400, 00:50:BF:98:94:9A, IRQ 9.
PCI: Enabling device 00:1d.7 (0004 -> 0006)
PCI: Found IRQ 9 for device 00:1d.7
PCI: Sharing IRQ 9 with 02:0b.0
PCI: Setting latency timer of device 00:1d.7 to 64
...
eth0: no IPv6 routers present
_______________________________________________________
Linux Mailing List - http://www.unixtech.be
Subscribe/Unsubscribe: http://www.unixtech.be/mailman/listinfo/linux
Archives: http://www.mail-archive.com/[EMAIL PROTECTED]
IRC: efnet.unixtech.be:6667 - #unixtech
