question idiote, il y a bien un cd avec des données dans le graveur externe?

Le 05/01/06, François Soumillion <[EMAIL PROTECTED] > a écrit :
Oui il existe bel et bien...

ls -la sg0
crw-rw----  1 root cdrom 21, 0 2006-01-05 14:58 sg0

Une autre info, qui est peut-être utile, j'ai également un graveur cd
en interne.  Y-aurait'il une sorte d'interférence ?
Par ailleurs, le graveur cd interne ne passe pas par l'émulation scsi-ide.

François
Le 05/01/06, Jean-Marie Lambert<[EMAIL PROTECTED]> a écrit :
> Bonjour,
>
> est-ce que le /dev/sg0 existe bien ?
> Après une mise à jour de la SuSE 10.0, mon scanner était "out".
> J'ai constaté que les /dev/sg0 -- sg7 avaient été enlevés.
> Si c'est le cas, si /dev/sg0-sg7 n'existe pas, le créer par
> mknod /dev/sg0 c 21 0...
> Puis chmod a+rw /dev/sg0   pour que tous puissent
> utiliser  /dev/sg0
>
> Jean-Marie Lambert
>
> Le Jeu 5 01 06 15:09, François Soumillion a écrit:
> > Bonjour la liste,
> >
> > Après beaucoup d'activités au sujet du raid et autres question sur les
> > distros, je viens avec une question beaucoup plus légère.
> > Je me suis acheté un graveur DVD externe (interface USB2) mais je
> > n'arrive pas à le monter.
> > Il est bien reconnu au niveau USB (lsusb me signale sa présence).
> > Au niveau des messages kernel, je reçois ceci :
> > Jan  5 14:58:53 localhost kernel: usb 4-3: new high speed USB device
> > using ehci_hcd and address 5
> > Jan  5 14:58:53 localhost kernel: scsi2 : SCSI emulation for USB Mass
> > Storage devices
> > Jan  5 14:58:58 localhost kernel:   Vendor: HL-DT-ST  Model: DVDRRW
> > GSA-2166D  Rev: 1.00
> > Jan  5 14:58:58 localhost kernel:   Type:   CD-ROM
> >         ANSI SCSI revision: 00
> > Jan  5 14:58:58 localhost kernel: Attached scsi generic sg0 at scsi2,
> > channel 0, id 0, lun 0,  type 5
> >
> > Je me suis donc naivement que je n'avais qu'à faire un mount -t
> > iso9660 /dev/sg0 ~/dvd.  Là, je reçois le message suivant: mount:
> > /dev/sg0 is not a block device
> >
> > Pour info, je suis en Debian testing, kernel 2.6.14.5
> >
> > Merci d'avance pour votre aide.
> >
> > François
> > _______________________________________________________
> > Linux Mailing List - http://www.unixtech.be
> > Subscribe/Unsubscribe:
> http://lists.unixtech.be/cgi-bin/mailman/listinfo/linux
> > Archives: http://www.mail-archive.com/linux@lists.unixtech.be
> > IRC: chat.unixtech.be:6667 - #unixtech
> > NNTP: news.gname.org - gmane.org.user-groups.linux.unixtech
> >
> _______________________________________________________
> Linux Mailing List - http://www.unixtech.be
> Subscribe/Unsubscribe: http://lists.unixtech.be/cgi-bin/mailman/listinfo/linux
> Archives: http://www.mail-archive.com/linux@lists.unixtech.be
> IRC: chat.unixtech.be:6667 - #unixtech
> NNTP: news.gname.org - gmane.org.user-groups.linux.unixtech
>
_______________________________________________________
Linux Mailing List - http://www.unixtech.be
Subscribe/Unsubscribe: http://lists.unixtech.be/cgi-bin/mailman/listinfo/linux
Archives: http://www.mail-archive.com/linux@lists.unixtech.be
IRC: chat.unixtech.be:6667 - #unixtech
NNTP: news.gname.org - gmane.org.user-groups.linux.unixtech



--
--
Thomas Silvestre
_______________________________________________________
Linux Mailing List - http://www.unixtech.be
Subscribe/Unsubscribe: http://lists.unixtech.be/cgi-bin/mailman/listinfo/linux
Archives: http://www.mail-archive.com/linux@lists.unixtech.be
IRC: chat.unixtech.be:6667 - #unixtech
NNTP: news.gname.org - gmane.org.user-groups.linux.unixtech

Répondre à