>
>> I've managed to solve just about every problem I've encountered by way
>> of blogs and FAQ web pages. However, I now have one that I can't seem to
>> find a remedy for.
>>
>> None of my Windows applications are able to access external storage
>> media such as flash drives and hard drives. Some can't even access the
>> CDROM, and for my Topo! software that's an essential as all map dta is
>> stored on CDROMs and there is zero alternative.
>>
>> So, how do you condition the file management system so that all
>> applications can access all storage media?
>>
>> Chris
>>
>
>Hi,
>
>Are you using wine or is this a windows question ?
>
It's probably a Wine question.
>
>On windows open command.com and type automount if it says 'disabled'
>type 'automount enable'
>
>On wine the situation is more complex, using wine config you can set a
>file path to a iso image as the cd rom (or under the advanced settings
>point it at the real device.
>
I may have solved this in a somewhat unusual and less complicated way. I
loaded one of my Topo! map CDROMs in the drive, then right-clicked on the "open
with another application" and selected Topo! from the list to see if I could
access it in reverse. It did open, and as I went from one map set to another I
found that I could do so in Topo! instead of doing it in reverse. And it
worked properly after I did a full cold restart, so something within Wine got
set properly.
I then tried the same thing with an Excel file on an external hard drive
and found that once I had opened a single file from that drive I could access
the entire drive. Same with AutoCAD 2000 and a couple of other Windows
applications. And it worked just as well with a flash/thumb drive, and again
worked fully after a full cold restart.
I've also learned that the trouble I was having installing some Windows
applications had to do with the compatability setting in Wine. In winecfg
there's a window for setting the compatability level, and I now have mine set
to Win98 as all of my software is for that OS, most of which worked on WinXP.
It was initially set to something beyond WinXP.
Next step is to determine how to run a massive DOS CAD/CAE utility within
Linux. There's a Yahoo! group for that software and I'm certain that someone
there has already figured it out.
And I need to determine how to setup internet access by way of a dialup
connection. I have the Win7 hard drive installed right now so that I can have
dialup access.
Chris
------------------------------------
To unsubscribe from this list, please email
[email protected] & you will be removed.Yahoo! Groups
Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/LINUX_Newbies/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/LINUX_Newbies/join
(Yahoo! ID required)
<*> To change settings via email:
[email protected]
[email protected]
<*> To unsubscribe from this group, send an email to:
[email protected]
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
