sorry, check sum should be 0xf0. NIC is ok. but usb's irq is not correct.
zhu shi song <[EMAIL PROTECTED]> wrote:
yes, irq_tables.c is:
/* This file was generated by getpir.c, do not modify!
(but if you do, please run checkpir on it to verify)
Contains the IRQ Routing Table dumped directly from your memory , wich BIOS sets upDocumentation at : http://www.microsoft.com/hwdev/busbios/PCIIRQ.HTM
*/#include <arch/pirq_routing.h>
const struct irq_routing_table intel_irq_routing_table = {
PIRQ_SIGNATURE, /* u32 signature */
PIRQ_VERSION, /* u16 version */
32+16*4, /* there can be total 4 devices on the bus */
0, /* Where the interrupt router lies (bus) */
0x90, /* Where the interrupt router lies (dev) */
0x8c00, /* IRQs devoted exclusively to PCI usage */
0x1078, /* Vendor */
&am! p;nb! sp; 0x2, /* Device */
0, /* Crap (miniport) */
{ 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0 }, /* u8 rfu[11] */
0xf0, /* u8 checksum , this hase to set to some value that would give 0 after the sum of all
bytes for this structure (including checksum) */
{
{0,0x78, {{0x3, 0xdeb8}, {0x4, 0xdeb8}, {0x1, 0xdeb8}, {0x2, 0xdeb8}}, 0x2, 0},
{0,0x88, {{0x4, 0xdeb8}, {0x1, 0xdeb8}, {0x2, 0xdeb8}, {0x3, 0xdeb8}}, 0x3, 0},
&n! bsp;&n! bsp; {0,0x98, {{0x1, 0xdeb8}, {0, 0xdeb8}, {0, 0xdeb8}, {0, 0xdeb8}}, 0, 0},
{0x40,0, {{0, 0}, {0, 0}, {0, 0}, {0, 0}}, 0, 0},
}
};Andrew Ip <[EMAIL PROTECTED]> wrote:
> no any progress. linux can't assign pci irq. what's wrong?
Have you run getpir to get the correct pirq table?
-Andrew
--
Andrew Ip
Email: [EMAIL PROTECTED]
Tel: (852) 2542 2046
Fax: (852) 2542 2036
Mobile: (852) 9201 9866
Cwlinux Limited
Unit 202B 2/F Lai Cheong Factory Building,
479-479A Castle Peak Road,
Lai Chi Kok, Kowloon,
Hong Kong.
Tel: (852)2542 2046
Fax: (852)2542 2036
For public pgp key, please obtain it from http://www.keyserver.net/en.
Do you Yahoo!?
Yahoo! Tax Center - forms, calculators, tips, and more
Do you Yahoo!?
Yahoo! Tax Center - forms, calculators, tips, and more