OK, I have applied Yh Lu's patches for the most part. In almost all cases
they are tyan 2880-specific. There are three things I can see that might
affect others:
#ifdef some-variable
no longer works in many places, it has to be
#if some-variable == 1
to work.
- for the new config too, there is no longer a default for _RAMBASE,
due to PPC and K8 differences
raminit.c sees the following changes:
Index: src/northbridge/amd/amdk8/raminit.c
===================================================================
RCS file: /cvsroot/freebios/freebios2/src/northbridge/amd/amdk8/raminit.c,v
retrieving revision 1.12
diff -r1.12 raminit.c
921a922,927
> //BY LYH add IOMMU 64M APERTURE
> PCI_ADDR(0, 0x18, 3, 0x94), 0xffff8000, 0x00000f70,
> PCI_ADDR(0, 0x18, 3, 0x90), 0xffffff80, 0x00000002,
> PCI_ADDR(0, 0x18, 3, 0x98), 0x0000000f, 0x00068300,
>
> //BY LYH END
1119c1125,1141
<
---
> static void fill_last(unsigned long node_id,unsigned long base)
> {
> //BY LYH //Fill next base reg with right value
> unsigned i;
> unsigned base_reg;
> base &=0xffff0000;
> device_t device;
> for(device = PCI_DEV(0, 0x18, 1); device <= PCI_DEV(0, 0x1f, 1); device
> += PCI_DEV(0, 1, 0)) {
> for(i=node_id+1;i<=7;i++) {
> base_reg=0x40+(i<<3);
> pci_write_config32(device,base_reg,base);
> }
> }
> //BY LYH END
> }
>
1128a1151
>
1145a1169
>
1254,1256c1278,1280
< print_debug("csbase=");
< print_debug_hex32(csbase);
< print_debug("\r\n");
---
> // print_debug("csbase=");
> // print_debug_hex32(csbase);
> // print_debug("\r\n");
1285a1310,1312
> //BY LYH
> fill_last(ctrl->node_id, tom_k<<2);
> //BY LYH END
1288,1291c1315,1319
< if(ctrl->node_id==1) {
< pci_write_config32(ctrl->f2, DRAM_CSBASE, 0x00000001);
<
< }
---
> dump_pci_device(PCI_DEV(0, 0x18, 1));
>
> // if(ctrl->node_id==1) {
> // pci_write_config32(ctrl->f2, DRAM_CSBASE, 0x00000001);
> // }
and the amd8111 sees this:
Index: src/southbridge/amd/amd8111/amd8111_ldtstop.c
===================================================================
RCS file: /cvsroot/freebios/freebios2/src/southbridge/amd/amd8111/amd8111_ldtstop.c,v
retrieving revision 1.4
diff -r1.4 amd8111_ldtstop.c
22c22
< pci_write_config16(dev, 0x48, pci_read_config16(dev,0x48) & ~CPUPIN);
---
> pci_write_config32(dev, 0x48, pci_read_config32(dev,0x48) & ~CPUPIN);
If this is trouble, let me know.
You are going to have to set _RAMBASE in your mainboard Config.lb now.
ron
_______________________________________________
Linuxbios mailing list
[EMAIL PROTECTED]
http://www.clustermatic.org/mailman/listinfo/linuxbios
