Stefan, Change that to 1 seems no use.
For Tyan S2885, the 8131 and 8111 is connected to CPU0 Link2, and 8151 is linked to CPU0 link0. I have to manual to change src/device/hypertransport.c 's hypertransport_scan_chain the link scan sequence from "0 to 2" to "2 to 0". I think it works for your case to. Regards YH -----邮件原件----- 发件人: Stefan Reinauer [mailto:[EMAIL PROTECTED] 发送时间: 2003年9月26日 5:19 收件人: [EMAIL PROTECTED] 主题: config tool + tree enumeration Hi, I have several non coherent ht devices in a chain, i.e. : CPU0 -- CPU1 or CPU2 -- CPU3 | | | 8131 CPU0 -- CPU2 | | | 8111 8111 8131 | 8131 The links to the non coherent devices are LDT1 or LDT2, not LDT0. Do I have to specify the "southbridges with Bus ID 1/2 then, since it's not on the first Link, or does it have to be 0, since it's the first south bridge? northbridge amd/amdk8 "mc0" pci 0:18.0 [..] southbridge amd/amd8131 "amd8131" pci 1:0.0 ^^^^^ [..] end southbridge amd/amd8111 "amd8111" pci 1:0.0 ^^^^^ [..] end end Stefan -- Architecture Team SuSE Linux AG _______________________________________________ Linuxbios mailing list [EMAIL PROTECTED] http://www.clustermatic.org/mailman/listinfo/linuxbios _______________________________________________ Linuxbios mailing list [EMAIL PROTECTED] http://www.clustermatic.org/mailman/listinfo/linuxbios