Hi,
thanks for all, the compile works now. I used the redhat 7.1.
with Debian stable (woody) it works also.
Now i try to use the romimage with my stpc elite board but it hangs after:
Call init
Enabling com device: 04
iobase = 0x03f8 irq=4
after this some strange character ...
On my stpc elite card, i have only 2 serial ports, no floppy, no parallel
port. Maybe something goes wrong with this ...
i try to use NO_KEYBOARD option set to 1 and MUST_ENABLE_FLOPPY option set to
0 but no change.
if someone have an idea ..., now i'm looking into the sources.
Best regards
--
Fathi
> These are the versions I used (from redhat 7.1):
>
> Program Version Used for
> python 1.5.2 Configuring the BIOS.
> perl 5.6.0 Used during building the image.
> make 3.79.1 For orchestrating compilation etc
> gcc 2.96 The C compiler.
> binutils 2.10.91 Other program building tools, assembler, linker etc.
> fileutils 4.0.36 dd, cp, ls, mkdir etc
> textutils 2.0.11 cat etc
> sed 3.02 scripts
> bash 2.04.1 Command shell, shell scripts
> cvs 1.11 Extracting/updating files from the external project archive
> sh-utils 2.0 date etc, note some such as echo, test etc are bash built-ins
>
> --
> Peter Fox <[EMAIL PROTECTED]> Aeroflex Test Solutions
> Principal Design Engineer Stevenage
> Any opinions expressed above are http://www.aeroflex.com/
> not necessarily those of Aeroflex. Tel: + 44 (0) 1438 742200
_______________________________________________
Linuxbios mailing list
[EMAIL PROTECTED]
http://www.clustermatic.org/mailman/listinfo/linuxbios
