Li-Ta Lo <[EMAIL PROTECTED]> writes: > On Wed, 2004-05-05 at 10:51, YhLu wrote: > > If I changed config.lb > > PCI 1:0.2 on --> PCI 1:0.2 off > > The PCI 1:0.0 and PCI 1:0.1 will be disabled together. > > > > According to AMD 8111 data sheet, LPC 0x48, only can be disabled the device > > in second bus by device num, and the three USB share one device number. > > > > So I guess the code about 0x47 must be there. > > > > Ron and I just dicurssed about the enable/disable mechanism for > amd8111. We are going to implement a slightly better one soon. > > Actually, the enable/disable for devices in amd8111 is multiplexed > in amd8111_enable and the device_operation::enable() is directed to > amd8111_enable. We are going to demultiplex this and each devices > has its own "real" enable method.
No. This must be per chip. Because you cannot necessarily see these devices before you enable/disable them. And only one device on the 8111 actually does the enable/disable. Eric _______________________________________________ Linuxbios mailing list [EMAIL PROTECTED] http://www.clustermatic.org/mailman/listinfo/linuxbios
