Hi, I am unable to get my kernel & initrd off of the usb stick. I was reading through the documents and came across this line in README.etherboot_in_filo: You can not use filo and ide_disk at the same time. Can you tell me what this means? Do I need to rebuild filo without IDE support to get USB support? Just to recap: My kernel & initrd fails as the initrd execution complaining of a bad CRC when I use the elf as a payload to load with with filo. I then try uda1:/kernel initrd=/boot/initrd root=/dev/sda1 and I get those td errors. I then tried your ramfs.elf and I get the same behavior are my elf image with the CRC complaining when the initrd portion is executed. Note, I have confirmed my elf works with etherboot, just not filo yet.... The CRC error makes me think that the image did not get loaded correctly by the elf boot. Can you confirm you used Eric's mkelfImage2-5? Here is my dump of the readelf -a. ELF Header: Magic: 7f 45 4c 46 01 01 01 00 00 00 00 00 00 00 00 00 Class: ELF32 Data: 2's complement, little endian Version: 1 (current) OS/ABI: UNIX - System V ABI Version: 0 Type: EXEC (Executable file) Machine: Intel 80386 Version: 0x1 Entry point address: 0x10000 Start of program headers: 52 (bytes into file) Start of section headers: 0 (bytes into file) Flags: 0x0 Size of this header: 52 (bytes) Size of program headers: 32 (bytes) Number of program headers: 5 Size of section headers: 0 (bytes) Number of section headers: 0 Section header string table index: 0 There are no sections in this file. Program Headers: Type Offset VirtAddr PhysAddr FileSiz MemSiz Flg Align NOTE 0x0000d4 0x00000000 0x00000000 0x00088 0x00088 RWE 0 LOAD 0x00015c 0x00010000 0x00010000 0x0559c 0x1aa24 RWE 0 LOAD 0x0056f8 0x00091000 0x00091000 0x00000 0x00070 RWE 0 LOAD 0x0056f8 0x00100000 0x00100000 0x1a952a 0x700000 RWE 0 LOAD 0x1aec22 0x00800000 0x00800000 0x2769f5 0x2769f5 RWE 0 There is no dynamic segment in this file. There are no relocations in this file. There are no unwind sections in this file. No version information found in this file. Thanks, Dave On Fri, 2004-07-09 at 15:48, YhLu wrote: I have got two cpus and four dimms for every CPU. |
<<attachment: image001.gif>>