Thomas, On Sat, 2004-08-07 at 16:57, Stefan Reinauer wrote: > > my graphics-controller is integrated in the Cx5530A-chipset. I think it > > should be supported, or am I wrong? > > Someone here on the list got it working, but generally speaking, it does > not work out of the box. Cx5530 has a pretty broken design..
I did a quick and dirty port of LinuxBios V1 to an SBC with a GX1 CPU and a CS5530 using the cocom/voyager2 directory as a base and managed to get it up and running fairly quickly with console output on the serial port. Basic console graphics took a little longer (but not much) but unfortunately I then ran out of time before I got graphics working fully. If you want I can dig out the diffs and my config file and mail them to you but I should warn you it was a bit rough and ready so they would definitely need more work (and I don't really have time to pursue it myself right now). However a quick look at your config compared to mine shows a few lines which I have in mine which may be significant (or not): option ZKERNEL_START=0xfffc0000 option ZKERNEL_MASK=0xffff option PAYLOAD_SIZE=196608 Of course if you're using LinuxBios V2 then this won't be much use to you I'm afraid. > Stefan Cheers Ian > _______________________________________________ > Linuxbios mailing list > [EMAIL PROTECTED] > http://www.clustermatic.org/mailman/listinfo/linuxbios -- Ian Smith <[EMAIL PROTECTED]> Abelon Systems _______________________________________________ Linuxbios mailing list [EMAIL PROTECTED] http://www.clustermatic.org/mailman/listinfo/linuxbios
