On Thu, 2004-08-19 at 18:34, Hendricks David W. wrote:
> Is this on the S2880? The only patch you might need is for integrated ATi
> VGA support on some mainboards. Other than that a current CVS tree should
> do the trick.
Nope, this is on an S2882...
Let me try to clarify what you're saying... the version we're running
(1.1.62.0) will not work properly, and we need a current version from
CVS to fix this problem?
No problem either way, I just want to be clear before I start down this
road :)
-dbs
>
> On Thu, 19 Aug 2004, Dave Belfer-Shevett wrote:
>
> > We're in the process of deploying Linuxbios to boot a cluster of Opteron
> > based blade servers. I built a new kernel, put it in /tftpboot after
> > using:
> >
> > mkelf-linux --rootdir=rom --ip=rom ./bzImage > vmlinuz.tyan
> >
> > and cycled the blade. Wen booting, I get:
> >
> > Searching for server (DHCP)
> > Me: 192.168.1.200, Server: 192.168.1.200, Gateway 192.168.1.1
> > Loading 192.168.1.200:vmlinuz.tyan (ELF)... done
> >
> > LinuxBIOS-1.1.62.0_Fallback [date date] starting...
> > Unknown Trwt
> >
> > Looking at an old message to this list, there's this snippet:
> > http://www.mail-archive.com/[EMAIL PROTECTED]/msg03174.html
> >
> > where the following line(s) are, in set_Trwt()...
> > if ((clocks < DTH_TRWT_MIN) || (clocks > DTH_TRWT_MAX)) {
> > die("Unknown Trwt");
> > }
> >
> > What is this, and why is it happening? Is there a patch needed for LinuxBIOS
> > to work properly on modern Opterons?
> >
> > Thanks, I'm in dire straights here, any help would be appreciated.
> >
> > -dbs
> >
> >
--
-------------------. .-----------
Dave Belfer-Shevett \ Conference Management Solutions \ Stonekeep
[EMAIL PROTECTED] \ http://www.stonekeep.com \ Consulting
---------------------' 978 239 5902 `------------
_______________________________________________
Linuxbios mailing list
[EMAIL PROTECTED]
http://www.clustermatic.org/mailman/listinfo/linuxbios
