Matt schrieb: > Hi > Im new to the list, so apoligise if this has been asked before :( > I use the EPIA PD10000 boards for various projects and would like to use > linux bios on the boards, the PD range is not listed on the site, so i > thought id ask here :) > I understand that video can be a problem with the EPIA boards but all i realy > want is a serial output :) >
Should work with epia-m as target, its almost the same hardware. > The PD10000 board has the following chipsets :- > # Processor VIA C3™/ VIA Eden™ EBGA processor > # Chipset VIA CLE266 North Bridge > # VIA VT8235 South Bridge > # System Memory 1 DDR266 DIMM socket > # Up to 1GB memory size > # VGA Integrated VIA UniChrome™ AGP graphics with MPEG-2 Accelerator > # Expansion Slots 1 PCI > # Onboard IDE 2 X UltraDMA 133/100/66 Connector > # Onboard LAN VIA VT6105 LOM+VT6103 10/100 Base-T Ethernet PHY > # Onboard Audio VIA VT1612A 2 channel AC' 97 codec > # Award BIOS > # 2/4Mbit flash memory > # CPU voltage monitoring > # Wake-on-LAN, Keyboard Power-on, Timer Power-on > # System power management > # AC power failure recovery > (data taken from VIA website : > http://www.via.com.tw/en/products/mainboards/mini_itx/epia_pd/) > > -- linuxbios mailing list [email protected] http://www.openbios.org/mailman/listinfo/linuxbios
